Rendered at 13:39:59 GMT+0000 (Coordinated Universal Time) with Cloudflare Workers.
c0rruptbytes 3 days ago [-]
I don't know about good, I use a lot of local models and they're still pretty painful to run locally
You have dense models (qwen 27b, gemma 31b) who are pretty smart, but pretty slow
You have MoE models (gemma 26b, qwen 35b, north mini code 30b) who are pretty fast, but make a lot of mistakes
You need a lot of memory to run these well, quantization makes tool calling weaker, so most run at 4 bit quants and are wondering why it kinda sucks and that's because you've essentially lobotomized the model (I recommend unsloth quants, i recommend 6bit for MoEs and 5bit for dense)
So you need a lot of compute to make the pre-fill fast, you need bandwidth to make the decode fast, you need a lot of memory to hold everything - lot of ifs
On top of that, your laptop becomes a loud hot churning machine, it's uncomfortable to work with.
So are they good? not really. Do they work? yes
edit: just wanna clarify - i think open models are the future, i think they're super important, i'm contributing constantly to the ecosystem - i think people should play around with these models, i think people should use `pi` and learn how it all works - but don't download a model expecting it to be good out of the box, you will have to tune and configure a lot of stuff to replace a "coding agent" that most people are using models for
saghm 3 days ago [-]
This is basically my experience as well. I have a moderately recent but high spec desktop (Radeon 6900 XT with 16 GB VRAM, Ryzen 9 7900X 12-core, 64 GB system RAM), and I tried out some recommended models with ollama a month or two ago. Anything not geared specifically towards coding seemed to struggled with actually making tool calls instead of just stating the actions they would take without making them (and trying to get help from them to explain what I needed to configure to change that behavior was useless; qwen refused to believe that it was running in ollama and insisted that it was running from the Alibaba cloud without access to my local system), and the models intended for coding were barely thinking faster than I could type (if they had any ability to show thinking at all).
The best "free" experience I've found is using OpenCode with Big Pickle. It's not especially smart, so it often won't produce the correct result the first time, but the free tier is generous enough that I don't think I've hit the limit more than twice over around a month with frequent multi-hour sessions. If running locally is truly the goal, it's not going to fit the bill, but if the goal is just "get the best experience without having to pay for a sub or tokens", it's the least bad option I've found so far.
rapind 3 days ago [-]
> The best "free" experience I've found is using OpenCode with Big Pickle.
I have absolutely zero interest in free. I honestly don't think I'm even remotely in the same demographic as people using free tiers / models.
I want to pay. I don't want my data used for training. I want it to be open. I want it to be consistently up (more than Claude!). I want it to be fast. I don't want it to be subsidized as that's just an excuse for shitty quality. Deepseek flash knocks it out of the park on all of these except you're data is used in training. I'm fine with it being hosted since there's no way I'm using it 24/7, but data MUST be private.
Basically I want Hetzner and OVH to run open model clouds. I'm convinced this is going to happen eventually when everyone realizes this is a commodity.
milesvp 2 days ago [-]
If you think your data isn’t being hoovered up I’d like to point out that every model is possible due to federal crimes committed to obtain the information they were trained on. Regardless of how much you are paying, your data is worth another petty civil infraction.
horacemorace 2 days ago [-]
A million times this. There is “private” as a corporate-legality licensing perspective. There is “private” as a human concept. The two are seemingly opposite, yet as all the money is focused on the former there’s no airtime left for the latter.
suncemoje 2 days ago [-]
Then I'm interested if there are any facts as to what ZDR actually means?
jaapz 2 days ago [-]
It can still mean Zero Data Retention - i just comes down to whether you trust the company to actually do what they promise.
The fact that they've trained models on data that wasn't theirs does not make me trust them a lot when they make this claim.
munksbeer 2 days ago [-]
When discussing this, may I ask (I know you are probably bored of the actual arguments), what does "trained models on data that wasn't theirs" actually mean in practice?
Again, I know these arguments have been done to death, but every human who reads source code that wasn't written by them, or views art that wasn't created by them, and practices against this art, is training their brain on data "that wasn't theirs".
They are frequently making a living doing so.
Is this distinction the scale, or is there actually a different more strict definition that we should be using as a common language to talk about this? As in, I should not even be reading certain source code if it is not licensed appropriate, or I will be in breach because I'm training myself illegally? And the same question for art, etc?
VBprogrammer 2 days ago [-]
In general humans don't have perfect recall. Even people with what we might call a photographic memory don't have the ability to memorise millions of lines of code and output them with little effort.
It hinges somewhat on the concept of how much you believe things are being learned and how much is just pattern matching and borrowing a solution from memory. Certainly in the early days of Copilot it was possible to get it to output chunks of open source code near verbatim.
I think, generally, people are probably closer to believing that there is some kind of reasoning being carried out by these models than in those early days but it would also be easy to strip all of the immediately identifiable comments etc from the training materials to make it harder to detect.
iwontberude 2 days ago [-]
If it outputs copyrighted material, which it does handily, then it doesn’t really matter.
antonvs 2 days ago [-]
> how much is just pattern matching and borrowing a solution from memory.
It's easy to show that this is not the case. This is a well-known phenomenon in ML, known as generalization - specifically, compositional generalization. See e.g. https://research.google/blog/measuring-compositional-general... for a description - although note that that post is from 2020, and models have become much better at this since then.
People can "believe" what they want, but there's plenty of work that definitively falsifies beliefs about "borrowing a solution from memory".
dpoloncsak 2 days ago [-]
A product is not a human. They are selling a product based off copy-righted material without the rights to it. It's a pretty easy line to draw, honestly.
munksbeer 1 days ago [-]
I don't think it is easy, otherwise this wouldn't be such a contentious and frequently discussed issue.
A human who trains their brain on material they don't own then creates art or writes code based on this training, sells the product too.
dpoloncsak 23 hours ago [-]
Which is not illegal to do. It becomes illegal if you directly use or reference the material in your product. Consuming copyrighted material personally is fully legal, training a model on that same copy-righted material is illegal. Where is the contention?
(Not a lawyer, just a nerd)
munksbeer 5 hours ago [-]
>Consuming copyrighted material personally is fully legal, training a model on that same copy-righted material is illegal. Where is the contention?
The contention is obvious in your statement. Is it illegal to train a model, and why? Why is it legal to train a human on copyright material and then sell those skills, vs training a computer and selling the skills?
This isn't black and white.
XMPPwocky 2 days ago [-]
Why is something being human or not relevant here?
dpoloncsak 2 days ago [-]
Because the laws were written by humans for humans, and that's where they seem to be drawing the line
glitchc 2 days ago [-]
Once they feed your data into the training dataset, they can delete the individualized copy. The training dataset is, of course, a trade secret that can never be exposed without causing serious harm to the company's model, or equivalent legalese that will prevent it's disclosure to all, governments included.
wahern 2 days ago [-]
Copyright violation is not per se a crime. I think a colorable defense of fair use, even if it would fail in a civil trial, would negate the mens rea element. I can't easily find caselaw or articles regarding this, though, as most criminal copyright cases involve straightforward reproduction and distribution schemes. Maybe that's because prosecutors won't press cases that might raise a question of fair use?
But I agree with your larger point. AI companies have copied Uber's aggressive posture, pushing the legal envelope with expectations of positive return. Surely they'll continue doing the same in other areas.
larodi 2 days ago [-]
The curiosity is that these companies somehow got around crimes and are above law (1) and these crimes mean something in a limited jurisdiction, like copyright laws of USA/Canada are not world’s (2). So it’s all cyberpunk at this point.
aamoscodes 3 days ago [-]
You can pay, and also use deepseek-v4-flash. OpenRouter even lets you "block" or limit your usage to providers that don't train on data. Since the weights are open, other companies are already serving the model on non-DeepSeek owned hardware: https://openrouter.ai/deepseek/deepseek-v4-flash
fc417fc802 3 days ago [-]
> OpenRouter even lets you "block" or limit your usage to providers that don't train on data.
More than that, they have various zero data retention options and provide a convenient json list of them.
larodi 2 days ago [-]
The fact OpenRouter strips https to reroute screams danger already.
fc417fc802 2 days ago [-]
What do you mean? Are you objecting that they communicate with the provider on your behalf? But how else would you design such a system?
Plumbing you straight through would require nonstandard certificate juggling and they wouldn't be able to implement their core service of providing a standardized API nor could they transparently route your request to the fastest / cheapest / whatever provider on the fly nor could they implement transparent fallback nor could they implement their policy of not billing you if the response from the provider is invalid.
Also the chosen provider could fingerprint your network stack if you communicated directly. The routing service is acting as a proxy and for most providers fully anonymizes requests (it does send a stable uid to some of them though).
larodi 1 days ago [-]
Precisely this. That somehow is okay to put your trust into man in the middle. To your comment how you do it - yes it is difficult to do it right, but not impossible.
rapind 3 days ago [-]
Good to know. I hadn't checks since early is DS4's launch when they were the only provide (I think maybe there was one other, but they also trained on your data). I see several private options now.
darkmarmot 3 days ago [-]
Hard to guarantee it's private if you don't keep it local... I don't have a lot of trust for companies in this space.
rapind 3 days ago [-]
Yes, but I think that'll change eventually. If you trust hosting your code with a specific cloud provider then you'll probably also trust them for code assist. At least that's my theory.
There'll probably need to be a threat of massive litigation should they fail to comply with such a policy.
naikrovek 3 days ago [-]
> Yes, but I think that'll change eventually.
Maybe people will trust companies, but those companies will rarely deserve that trust. Anyone that pays attention sees breach announcements almost every day. Security is never a concern for these companies until it embarrasses them. Then, as soon as the negative attention fades, security again becomes the second to last priority.
Do not trust companies with any data that is important to you unless the effective management of that data is required by law, and the laws are comprehensive.
fc417fc802 3 days ago [-]
If your contract says there's no data retention and then a bunch of your retained data gets leaked in a breach presumably you have grounds for a lawsuit.
ted_dunning 2 days ago [-]
That may be true, but it is likely that the contract limits you to arbitration, forbids class action and limits the penalty dramatically.
rob74 2 days ago [-]
My company has all the code in a private GitLab instance (almost everything else is on AWS, but not GitLab), but they still use Cursor, so our internal code gets sent to whatever AI company the model I select in the dropdown belongs to. Scary if you think about it: if you use Cursor, you don't have to trust only one specific AI company, you have to trust all of them...
pessimizer 3 days ago [-]
> If you trust hosting your code with a specific cloud provider then you'll probably also trust them for code assist.
I'm interested in this thought. There is significant motivation for providers to create a verifiable way for them not to deal with having access to client interactions with LLMs at all. Whatever standards and protocols have to be come up with in order to reassure clients.
Any good standards for privacy when interacting with LLMs could also trickle down to smaller providers, and everyone could offer guarantees. Even if the guarantee was literally just an insurance policy and a private court to decide if it pays out.
jen20 2 days ago [-]
I trust AWS in this space. I'm 100% sure that they will be precisely honoring the terms of service for Bedrock (I've never looked to see whether they claim to train on your data though).
kube-system 2 days ago [-]
You didn’t look because you subconsciously know you don’t need to. AWS has a solid track record, and the certifications and audits to back it up. and that’s why everyone trusts them including the most extreme of regulated industries.
Bedrock in fact does not train on your data. It was a big deal when it was announced that they share data with Anthropic for Fable, but even then it was gated away where you’d have to explicitly allow it.
rlkf 3 days ago [-]
> Basically I want Hetzner and OVH to run open model clouds
I see that OVH offers Qwen3.5-397B-A17B, which is a bit surprising to me. I thought that EU providers had to comply with the AI act where you have to provide opt-out and information about the training data once the model is sufficiently large (over 10^23 FLOPs, likely the case here), but providing information is not possible since people who train those models only give vague information at best.
Does anyone know if OVH is ignoring the law here, or whether it does not apply for some reason?
nl 2 days ago [-]
OVH is acting as a "Deployer", not a "Provider", which have special meaning under the AI Act.
There are much less (almost no) disclosure regulations on the deployer.
Does it not apply to hosting and running them for money? How would it not?
Aeolos 2 days ago [-]
It focuses on training and data provenance, rather than serving.
saghm 3 days ago [-]
I'm probably somewhat adjacent to you. I would be happy to pay, but I just don't want to pay any of the companies that are actually offering things right now. I had the $20/month sub for Claude for a couple months, until one day I kept inexplicably getting errors saying I hit the limit even though their site showed my usage at less than half for the session and 8% for the week, and it seemed silly to pay for something that couldn't even properly respect its own measurements. OpenAI sketches me out too much as a company, Cursor feels lackluster when I use it for work from the account they pay for (and now is getting acquired by maybe the only AI company even sketchier than OpenAI), and I wasn't particularly impressed with Gemini or Mistral Vibe either when I tried them on the free tiers either.
rapind 3 days ago [-]
I was paying around $500 / month on average between multiple providers for over a year. I cancelled one a while ago because of pretty bad service availability (Bet you guess who that is!), which by all reports hasn't improved much.
For me, paying from $200 - $500 / month is reasonable if I can sustain a disruption free flow that doesn't require constant yak shaving. What I've found experimenting with DeepSeek on some open source library stuff is that it's actually going to cost me much less if I don't need frontier vibing (which I don't).
gaolei8888 3 days ago [-]
who?
gb2d_hn 2 days ago [-]
For me it's about the value of my time. I think that it's important that we have open models, but for getting real work done, my time is too valuable to waste it on subpar results or additional agent management when a max plan covers all the use I need. It's not worth quibbling over. If the cost / benefit ratio changes, I'll be looking harder at local set ups, but not at the moment.
Bnjoroge 3 days ago [-]
You can specify which providers you want to serve your model in OpenRouter. Then you can chose US-based ones.
dvngnt_ 15 hours ago [-]
Would venace ai work?
3 days ago [-]
djmips 2 days ago [-]
Did you try Claude Fable?
bel8 3 days ago [-]
These competent open models you want to use were trained on data from people like you and me.
I wonder if there are competent models trained purely on permissive open-source code like MIT or Apache 2.0.
yencabulator 3 days ago [-]
MIT and Apache 2.0 both require attribution, so it's not like limiting to those would help in license compliance.
superze 2 days ago [-]
Hetzner workforce can barely run a mature technology called s3 and you think they will be able to deploy openmodels?
KronisLV 2 days ago [-]
What mature implementations of S3 are there? MinIO that rugpulled the community, Garage that doesn’t even have proper setup scripts in their Docker containers and expect you to do the init manually, or Zenko cloud server that more or less got abandoned? I think there’s also SeaweedFS which might do better but I’m surprised at how shitty everything seems in this space - surely people aren’t being crazy and either storing their files on the FS directly to expose access to them through their app (hello directory traversal attacks) or storing them in relational DBs (hello wasted bandwidth and bloated backups).
The odd jank extends further, like Sonatype Nexus and some other software hardcodes AWS regions to choose from when configuring the storage even though your self-hosted implementation doesn’t have anything to do with AWS so you just have to come up with fake regions. If the cloud vendors each have to reimplement it because there is nothing as quality as PostgreSQL is for DBs, but for S3, then I’m hardly surprised at the state of things.
chrislusf 2 days ago [-]
I work on SeaweedFS. Let me know if see any bugs or just create a github issue.
spockz 3 days ago [-]
For what it is worth, I’m on a similar machine. (9070XT,5900X) and found a lot of performance improvement over ollama by compiling llama.cpp and running with —no-mmap and —perf. The context is still quite small though. With online models I use contexts of at least 200k which is useful for longer running/more complicated commands.
Locally I haven’t gone much further than 8k. That is sufficient for small changes on small code bases. And you need condensed tool output.
I haven’t tried any tool that compresses the tokens yet.
echelon 3 days ago [-]
I would rather we give up the idea of running open models on RTX cards and instead focus on running much bigger open models on H200s.
1. The hardware will eventually catch up.
2. This keeps the delta between frontier models smaller.
3. We can still fine tune and own the weights.
4. The models will be more useful, faster, and reliable.
RTX is hobbyist tier, not professional tier.
Gated cloud models from hyperscalers treat us like hobbyists in their own right.
We need equivalent scale models, but open.
zozbot234 3 days ago [-]
H200s and other enterprise datacenter GPUs are completely overkill in any realistic single- or few-users inference scenario. They're hugely unbalanced towards compute capacity which will go almost entirely unused (i.e. wasted) unless you're running huge batches on a continued basis. I've argued many times that local inference engines should support batched inference on a somewhat smaller scale for a variety of reasons (especially given the unexpected effectiveness of SSD streamed inference with larger-than-RAM models), but even I don't think we can realistically go to 300x or so for real-time inference, which is the range that pencils out quite consistently from a simple roofline model of these datacenter cards.
echelon 3 days ago [-]
If you're doing professional work in coding or video, you can easily saturate a single H200.
This is what RunPod-type services are for.
For instance, ComfyUI is an abomination that can't do half of what Nano Banana and Seedance 2.0 can do. And you have to sit around and wait 10x longer for single results.
I can rent an H200 for $3.50 an hour. That's INSANELY cheap.
I do not understand this split between hosted APIs and rinky-dink local RTX models. Both suck.
The ideal solution is models we own run on RunPods leveraging H200s.
I can spend $100-200/day on compute making much more value with the model outputs.
----
edit: I want to respond to comments, but the damned HN rate limits keep me to five comments a day now because I'm a contrarian and say things that rile up the anti-AI folks.
You don't need to buy an H200. It's a depreciating asset. You rent one. It's cheap to rent.
spockz 3 days ago [-]
Sure, to approach frontier model quality locally we need to have more power. And H200s are a way to get there.
However, we need to use the tools that we have. Even if I wanted to buy a (bunch of) H200 for me and my colleagues and could get the expense approved, they are hard to source where we are.
Yes. You can rent them, but I’m not sure how that affects the IP discussion.
Moreover, not everyone is doing coding and video so we have different tasks that can fit quite well on relatively light laptops (Gemma et al), for relatively directed coding sessions we can make do with RTX cards, or a small step up, all the way to H200 in the workstation. Or pods thereof.
We have the graphics cards and laptops with MLX right now. The H200 will take a year at least to arrive. Better get used to run stuff locally.
what 2 days ago [-]
> I’m a contrarian that says things that rile up the anti-AI folks
That’s hardly contrarian here, lol.
echelon 2 days ago [-]
Are we experiencing the same website?
I swear, two thirds of the folks here just make comments that dunk on AI. They underestimate it, hate it, hate those that use it, etc. It's the "old angry man yells at cloud" trope.
I've had so many consecutive days of "-4" karma posts that HN is blocking me from commenting. And the comment retorts I get from these folks are absolute gems that will undoubtedly age like milk.
zozbot234 3 days ago [-]
I'll definitely believe that for video generation models, but those are also very compute-intensive for rather middling results.
SR2Z 3 days ago [-]
That GPU costs 25k which means you really should have a rack to put it in. It's not realistic.
dofm 3 days ago [-]
Pressure on small model quality and design is absolutely what is needed. There are still gains to be made.
MrLeap 3 days ago [-]
There's a lot more professionals that have RTX cards than H200s. You're inevitably see more development and experimentation on things actual humans have lmao.
FridgeSeal 2 days ago [-]
Ah yes, because of all the people at home with computers who have…checks notes…datacentre GPU’s lying around.
redmalang 3 days ago [-]
Try llama.cpp it seems to be a lot more performant and a lot more hackable.
Also I'm surprised how substantial the impact of some of the inference configs (beyond just temp) can have, though this is much more model specific.
markussss 2 days ago [-]
My system is quite similar to your, my GPU is a 6950 XT and CPU a Ryzen 5 2600x, same amount of RAM, and I feel your pain. It sounds very similar to my experience from a few months ago. When it comes to tool calling, there are multiple possible issues; some models have borked templates bundled with the model file, some models are not trained on tool calling, some agent harnesses doesn't support the tool call output from the model very well, some quantizations ruin the models' abilities to call tools.
My suggestions if you want to further experiment with local models are to use llama.cpp instead of ollama [1], learn a little about the parameters that tune how much VRAM is used [2], look online for jinja template fixes for the model you're testing [3], and choose a model that was designed to do the task you want to achieve, with as high quantization as you can fit. The maximum model size you can run is VRAM + RAM, although you want as little of the model to be in system RAM as possible.
I'm running North Mini Code IQ3_XXS with some tuned parameters to fit my current tasks, and while it is not perfect for everything, it has not failed any tool calls I've asked it to make, or that it figured it should make on its own.
Interesting. Making low latency correct tool calls correctly is pretty important in voice AI cascading models(STT LLM TTS). Realtime
Models are still 2x the cost and there are only 2 providers openai and google that are in the race. For cost control it has to be cascading models
For llms Sadly the only model right now that fits the bill for LLM is GPT 4.1 and it’s standard in my stack because thinking models have unacceptable latency(>=1 sec) even though they are good at tool calling. The main issue with 4.1 is that it can make still mistakes and prompt prose has to be tuned quite a bit.
I wonder if any local models can be tuned to match the response time and tool calling while supporting many languages.
calgoo 2 days ago [-]
"My suggestions if you want to further experiment with local models are to use llama.cpp instead of ollama"
Or at least LM Studio if you want to play around with a lot of different models. Im currently using it with my 7800xt and Vulcan as i found it left my OS more stable ROCm does. I had a few system crashes with ROCm and running out of VRAM for the OS.
ryukoposting 3 days ago [-]
I found that, with the heavily quantized Qwen3 models I can cram onto my 3060 Ti, telling the model to use its tools in the system prompt made it a lot more likely to actually do it. YMMV of course, but give it a shot.
saghm 3 days ago [-]
I did try this, and it was pretty hit-or-miss still. I even went as far as configuring context for Zed to inject into all conversations saying stuff like "If you need to read a file, call read_file NOW. Do not say you will read it", and it still didn't really make a huge difference.
boppo1 3 days ago [-]
I have almost your system specs, how do they work for non-coding stuff like chat/knowledge/discussion? I've been using models to talk through social stuff I'm anxious about but dont want to annoy my friends with and it's been amazing, but I don't want to share that info with google/openai/anthropic anymore. I shouldn't have in the first place, but I couldn't help it, the exercise was too interesting.
fc417fc802 3 days ago [-]
You can test the open models for yourself using the various router services. Those also make it easy to use providers other than the major players.
alexpotato 2 days ago [-]
> The best "free" experience I've found is using OpenCode with Big Pickle.
They now offer DeepSeek V4 Flash for free and it def feels like a step up.
alfiedotwtf 2 days ago [-]
> qwen refused to believe that it was running in ollama and insisted that it was running from the Alibaba cloud without access to my local system
Sounds like you were either running at a too-low quant, or you were trying to do Agents with something like Qwen 3.5 9B? Qwen 3.6 27B at Q4_K_M I can have that at running all night after a single one-shot a, Anne when I come back in the morning, it’s done
aftbit 3 days ago [-]
IMO running local models "well" still requires an expensive hardware investment. You really want 96GB of VRAM on a modern Blackwell arch to run these models with decent KV cache. Trying to run them on a unified memory Mac, an AI Max AMD processor, or a DGX Spark-alike is really just asking for trouble. Prefill kills perf.
If you throw the right GPUs at the problem, they become much better - but still not quite in the realm of Sonnet or DeepSeek 4 Flash, let alone Opus / DeepSeek Pro or Mythos/Fable/GPT-5.5.
Given enough budget, power, and cooling, you can run some pretty good data pipelines, but for code, I think it still makes sense to shell out to an API provider most of the time.
ryan_glass 3 days ago [-]
For a fraction of the price of 96GB vram, I built a desktop based on a supermicro server mobo and EPYC 9 series CPU, with just under 400GB rdimm ram (approx $4500 all in but this was before the ram price hike). Works really well for serving larger local modals at a decent enough speed (I consider anything more than 10 tokens/second usable and value accuracy over speed).
coreyburnsdev 2 days ago [-]
that costs the same as 210 months (17.5) years of using codex 5.5 while not being near as good.
aftbit 2 days ago [-]
Yes, if your trust model allows you to use API providers or the big 3, you 100% should. They have better util than anything you self host, so they can be more efficient. On top of that, they're shoveling cash into the fire to try to capture marketshare, so they're offering inference for well below break-even costs.
The main reasons to use local models are:
1. Self-sovereignty & control
2. Data security
3. Offline availability
If none of those apply to you, then you should just use OpenAI or Anthropic.
dofm 3 days ago [-]
FWIW I think it might be both.
Ultimately if you skip over the opportunity to play with these models on your own machine you are losing out on a lot of really interesting educational opportunities — it helps make a lot of stuff feel more concrete in a way that only tinkering can.
But then I think once I had an idea of something that I was building against Gemma 4 or Qwen 3.6 I would be looking at openrouter etc., to stabilise it for the next tier of experimentation (and to get back a kind of multi-device access without tailscale/lm link etc.).
Are they good enough to replace what people seem to want to do with Claude? Maybe not. But it's an unparalleled learning opportunity.
EagnaIonat 3 days ago [-]
Depends what you need the model to do. The recent granite4.1:3b just takes 2GB of memory and is fast. Results are pretty good and support tool calling. Barely a squeak out of the Mac laptop.
Even faster with the MLX builds.
Then when I need more heavy lifting I fire up a larger model.
IMHO the issue isn't the models. I've had OpenClaw give the same results as Claude using open models locally. Slower but does the job. Something that can do optimal model switching is what's needed.
aftbit 3 days ago [-]
Yeah it 100% depends what you want the model to do. Some tasks, like extraction, summarization, or simple tool calling (e.g. "turn on my desk lamp") are very doable with tiny models. Others, like coding or more advanced agentic workflows can demand much more powerful models. I was thinking from the lens of coding or running _big_ data extraction pipelines (think ~8 billion pages).
EagnaIonat 2 days ago [-]
> thers, like coding or more advanced agentic workflows can demand much more powerful models.
You can do coding and agentic fine. For coding I use qwen3.6:35b-mlx and agentic granite4.1:3b works fine.
These are the models I use.
- granite4.1:3b
- granite4.1:30b
- gpt-oss:20b
- gpt-oss:120b (less so now)
- mistral-small3.2
- qwen3.6:35b-mlx
There will always be use cases that don't sit on your laptop, but most of what can be done can be done locally, it just requires a good framework to sit on it.
packetlost 2 days ago [-]
Why do you like gpt-oss-120b less now? What replaced it?
aftbit 2 days ago [-]
It's very likely to hallucinate. I'm mostly using Gemma 4 31B now when I need something offline. It is a very strong model for its size.
girvo 3 days ago [-]
> DGX Spark-alike is really just asking for trouble. Prefill kills perf.
You're right that prefill kills perf, but shrug the GB10 has far more compute than it has memory bandwidth, so prefill isn't it's bottleneck.
htrp 3 days ago [-]
I've seen the same, Sparks are great at non time-sensitive tasks. if you can set up a agentic loop that does not require human intervention, you can design around the memory bandwidth limitations
girvo 3 days ago [-]
The other benefit is that speculative decoding literally trades compute to make up for low bandwidth, so MTP/EAGLE/DFlash are unreasonably effective on the GB10 IMO, as long as your use case fits it.
I’m getting 40tk/s decode with 1000+tk/prefill with a 198B-A11B model on mine
EnPissant 2 days ago [-]
I thought MTP wasn't very useful on MoE models because the expert overlap for 2 tokens was too small.
girvo 2 days ago [-]
Still helps, and Step 3.5/3.7 were specifically trained for MTP (in a weird triple layer/triple head fashion with a kind of unique architecture)
With the currently-in-PR implementation it doubles decode performance for all the tasks I've been testing it against, at in the worst case is still a 35% uplift, so on a box with heaps of compute and not much memory bandwidth, it's worth it in practice
azeirah 2 days ago [-]
Qwen 3.6 27B performs similarly to sonnet 4.5 (note I said 4.5, not 4.6) when it comes to coding. It runs amazingly well on my PC with a 7900xtx.
It's worse at general tasks, but in the precise domain of coding I actually prefer to use it over my claude subscription because it has 0 latency (and no privacy concerns whatsoever).
wincy 3 days ago [-]
If I could just save up $6000 I could sell off my RTX 5090 for $4,000 and buy an RTX 6000 Blackwell Pro Workstation. I can fit models into the 32GB of vram but my context window ends up being tiny for any halfway capable model.
layer8 3 days ago [-]
Isn’t the RTX 6000 Blackwell Pro Workstation over $13000 now?
wincy 3 days ago [-]
Dang, that’s crazy. Last I checked they were $10,000. It seemed almost attainable to me as a mere mortal just last year. I’m glad I at least got enough vram and ram to play around a little bit with local models before all the prices went bananas.
girvo 3 days ago [-]
And rising. It's depressing.
qudat 3 days ago [-]
I feel like the claims come from wildly different personas and use cases. A 24gb vram, 5 year old titan run 27b at 30t/s and the results are good. I use sonnet and opus at my day job and they are more capable but I can still get the same out of qwen, I just need to be mindful of ctx
jtbaker 3 days ago [-]
> Trying to run them on a unified memory Mac
> but still not quite in the realm of Sonnet or DeepSeek 4 Flash
someone just put this on my radar yesterday, im about to try this today. how's your experience with it?
me thinks there's a lot of optimization strats we're currently leaving on the table just because the amount of things to explore and test are so expansive. but this one is super interesting targeting metal primarily and zeroing in on one model. instead of a one size fits all llama.cpp im very interested to see if theres a future where super tailor-made variants per model pans out to harnesses that can rapidly switch ultimately providing something akin to sonnet/early opus territory (that's my personal bench mark of good-enough i shall now cancel the hell out of this claude sub)
jtbaker 3 days ago [-]
I'm on the verge of cancelling my anthropic $20 plan since it's come out. On an M5 Max 128GB, hooked up to the pi.dev harness, I get in the neighborhood of 400-450tps prefill and 30-35tps generation. It is imminently usable and at times feels more stable than my previous CC setup. Occasionally there are things it struggles with that I will bounce back over to CC for, but it is highly usable. The future is bright for local models! As a tinkerer, it makes me really happy to have a local setup I can be just as productive in, and not have the token overlords ready to shut me down at any time.
aftbit 3 days ago [-]
That's DS4 Flash right? How does it feel in intelligence and speed compared to DS4 Flash hosted by Deepseek themselves or another API provider? I've been using API DS4 Flash for a lot of personal projects and have been quite impressed. I've spent $1 on building ~10 toy projects and gotten them all to work within the bounds of what I wanted without having to do much besides guide the model away from dumb loops.
jtbaker 3 days ago [-]
I'm using the DS4 flash IQ2 2-bit quant, per Salvadore's recommendations for my hardware in the repo. I haven't messed with the cloud hosted variant. The only other paid API I have messed with is a $20 Anthropic sub, primarily with whatever the latest version of Sonnet is. For the most part, this local configuration feels on par with that.
With this configuration (set up over the last month) I have been working on Python data processing tools, an internal Svelte 5/SvelteKit data intensive BI app, and some smaller Rust projects. It's been doing really well there.
npodbielski 2 days ago [-]
Anybody tried it on Strix Halo?
monksy 3 days ago [-]
That RTX6000Pro you mentioned is $12k.
aftbit 3 days ago [-]
Yep - I'd say either that or 4x 5090 is a great entry point to running local models "well". Two of them would be even better. If you don't have $12-24k to spend, you can try your hand with tiny models or quants or slow speeds, but it will be a much more painful experience. You're already giving up a lot by dropping down from frontier models - you're giving up even more by trying to squeeze them into little RAM and compute.
Prices will fall in the next few years. Maybe just play with the tiny toy models for now to learn how they work, then keep using API providers until they do.
eek2121 3 days ago [-]
Not really, Qwen 27b offloads to a decent gaming GPU (RTX 4090 in my case) without needing tons of RAM.
mathisfun123 3 days ago [-]
can you give more info? llama.cpp vs vllm? config? i wanna try specifically this model
maldie 2 days ago [-]
llama.cpp to get 115 tok/s on RTX 4090 with Qwen3.6-27B. For example in Windows the latest CUDA variant llama-b9678-bin-win-cuda-13.3-x64.zip and Unsloth UD-Q4_K_XL MTP gguf:
Note that this does not use kv cache quants as in my case quants offload to CPU and tanks performance. Also keep in mind this almost maxes VRAM usage so any additional browsers or other programs that use VRAM should be closed.
For chat go to http://localhost:8080/ and minimize the window to maximize perf as the web page UI draw itself consumes a lot of GPU perf via constant context switching.
Can try bigger than -c 75000 until perf gets lower than 100 tok/s - that means something is off as windows starts paging out memory or other issues. -c 50000 seems sweetspot if running browsers and stuff that consume 2GB VRAM. If wanting more than -c 140000 then likely need to use a bit smaller model quant.
CPU usage should be near zero, maybe 1 core load. If you see 8+ core load then settings are off and something is offloaded to CPU (for example kv cache). GPU load should be about 100%, meaning it utilizes work optimally in this case.
-t 16 can be omitted or set to the amount of physical cores, not important in this dense model that is 100% in GPU.
Can be pushed to 125 tok/s with that model if using --spec-draft-n-max 4 but VRAM usage also increases, so context needs to be smaller.
If speed is not important and want max context length then remove the draft-mtp parameters and also might need to use k and v quants like --cache-type-v q8_0, leave k f16 if possible to keep quality.
zozbot234 3 days ago [-]
Maybe we shouldn't be running these models on laptops with their thermally constrained form factor, and we shouldn't expect quick inference on a par with a large cloud-based platform either, at least not for near-SOTA model quality. It's still worth it to avoid becoming massively reliant on centralized services.
greenavocado 3 days ago [-]
I have a 5070 12 GB laptop GPU and can hit 72 tokens per second in the first couple thousand tokens before dropping to mid-high 50s after about 15k context.
This setup is extremely optimized down to the last flag. Changing any param above the temp flag craters performance.
I don't have enough system RAM to properly handle the large context windows so I don't use local models.
That’s useless without describing WHY you chose those flags, and how you did the optimisation…
halJordan 3 days ago [-]
The switches are all in the -h of llama.cpp (although the maintainers have a tendency to use the word in its definition). The actual values are essentially just what alibaba recommends. So you just need their model card. I would not call it highly optimized, more appropriately tuned.
greenavocado 3 days ago [-]
I found every possible flag and its description including CUDA related environment variables and went back and iterated with Claude Opus 4.8 High until every single flag mattered above the temp one.
nateb2022 3 days ago [-]
I get over 100 tok/s sustained on my M4 Max and M5 Max, in MacBook Pro's. LM Studio + MLX.
boguscoder 2 days ago [-]
Same experience on M4 Max .. but quality of qwen still leaves so much to be desired after getting used to virtually unlimited tokens at work. Many people on this (and similar) thread seem to believe local models would inevitably improve, and I want to believe this too, but I don’t see this ever happening without growing in size
Terretta 3 days ago [-]
With Qwen3.6-35B-A3B-MTP-UD-Q4_K_XL.gguf?
Also, funny lumping the M4 "and" the M5, I find them 15% to 45% different performance, depending.
And for a good deal of work, an M3 Studio Ultra outpaces the M4 and ties the M5 on single work at a time, outpaces both doing multiple work at a time.
nateb2022 2 days ago [-]
> With Qwen3.6-35B-A3B-MTP-UD-Q4_K_XL.gguf?
Ahh no I'm using the MLX version, it's about 5-10% faster than GGUFs in my experience.
mattmanser 3 days ago [-]
That's a quant 4 which the thread OP specifically called out as rubbish.
The Q4_K_XL bit for those not in the know.
greenavocado 3 days ago [-]
I typically find myself using a context of between 150-500k with GPT models so local models are simply not enough and I stopped using them.
stymaar 3 days ago [-]
That's way higher than their optimal ceiling (and absolutely suboptimal from a token cost point of view), why are you doing that?
greenavocado 3 days ago [-]
You're 100% right and its even severe than that: I daily drive on xhigh. I really try to avoid it, but when reconciling APIs across two large codebases you really start pressing north of 200k. I find myself topping out at 800k sometimes and that's with careful context management. I actually had to drop to GPT 5.4 for 1M context in my subscription because GPT 5.5 tops out at 272k. Hitting 800k context is better than repeatedly hitting let's say 200k out of 272k with multiple rounds of compaction. I run Can's snapcompact and while its better than normal compaction it still lobotomizes the model more than running with a very high context window.
c0rruptbytes 3 days ago [-]
large contexts degrade the performance - attention doesn't work will for large windows like that and cloud models are kind of hacking it
local models do involve some context engineering to get it okay, but it's not that rough
stymaar 3 days ago [-]
Anyone calling Qwen3.6-35B-A3B-Q4_K_XL “rubish” has no idea what they are talking about.
embedding-shape 3 days ago [-]
I'd agree that the quality degrades a lot between Q8 and Q4, borderline unusable as they start to fail with tool calling syntax even. Personally I'd say Q8 is as low as you want to go.
q4 isn't rubbish, but it's a compromise for a good value, q6 is essentially a no-compromise quantization and it's what i recommend for MoEs in my experience for agentic workflows
ridiculous_leke 3 days ago [-]
Can you comment on the quality and accuracy of it? People have managed to run Gemma 26b without GPU on old CPUs but I don't think quality is anywhere close to what Gemma 12b offers.
Shorel 1 days ago [-]
I have three laptops and a desktop. The desktop has 128GB of RAM.
I bought the memory at the end of the last year, and I was thinking, maybe this is excessive. No game will use that much memory, in a decade or more.
Now I realize it was one of the best purchases ever, I run qwen3-coder-next on it for just the cost of the electricity, while the coding and agents and whatever else is done in a laptop. Yeah, it is slower, I don't care. Infinite tokens is better than a few.
The cloud is another computer, but in this case it is mine =)
stemlord 3 days ago [-]
> It's still worth it to avoid becoming massively reliant on centralized services.
This isn't really good enough. Many of us need to get things done in a pinch and if our employers are already getting used to the idea of paying for enterprise subscriptions to cloud llm's then the local option needs to be good
wolvoleo 3 days ago [-]
For me I use only cloud for work. But I'd never trust any of my personal data to it.
2 days ago [-]
adam_arthur 3 days ago [-]
Gemma 4 is particularly good at pipeline/automation tasks.
It outperforms all the Qwen models (even 100B+) for rule following/automation style tasks in my experience. Its image interpretation is also very good, and out-benchmarks Opus.
Qwen seems to ignore instructions and consistently outputs incorrect formats (when token generation format is not explicitly constrained)
But yes, on the DGX Spark Gemma 31B Q4 with MTP runs around 20 tok/s and Gemma 26B A4B around 60 tok/s. Still quite slow. But on a high end Nvidia card would run significantly faster and still fit in memory.
I'd recommend for anyone getting into local models to focus on memory bandwidth over RAM. Models under 100B parameters are now sufficient and hugely useful for automation.
I agree that for coding/creation use cases, there's still not a compelling argument for local models.
But e.g. if you want to scan a list of stocks and interpret news/high pass filtering, interpreting logs, interpreting screenshots, the local models are more than sufficient already.
dstryr 3 days ago [-]
This is not my experience at all. Even the Nous Research guys have stated that "Qwen3.6-27B is the canonical local model to use Hermes Agent with" [https://old.reddit.com/r/LocalLLaMA/comments/1sz2y76/ama_wit...]. I am finding the same when used with Pi and OpenCode.
I'm talking about automation generally, not agent loops.
E.g. prompt A to achieve X, output in format Y. Use Y to do something in prompt B.
Agentic loops will underperform deterministic control flow pipelines (with non-determinism constrained to LLM calls).
Agents are more general, which is the main advantage. But inherently a more general solution will waste context on unnecessary reasoning.
Try asking the smaller Qwen models to output a JSON in a specific format. It basically can't do it consistently with a moderately sized prompt unless you constrain the token generation via GGML or are extremely repetitive and specific about it. (Thinking disabled)
Gemma 4 will do it correctly pretty much 100% of the time. (Thinking disabled)
Applies to other rule following as well in my experience.
Qwen may be better at toolcalling and certainly probably codegen.
It seems to me Google explicitly designed Gemma for edge device automation, and didn't fine tune for agentic or coding use cases.
trouve_search 3 days ago [-]
On a 5090, gemma4 26B runs at 350TPS with the command below [1] and gemma4 31B is around 150TPS with a similar command.
I'm really surprised how much slower a DGX spark is for the same price.
With the 5090 you need to buy the rest of the computer though, and the Dgx spark will run 1/4th as slow but use 1/5th the electricity. And the spark would be able to run things the 5090 just couldn’t, like the Qwen3.5 122b. Which is all just to say that for llm workflows there is no easy answer. And if you media generation it gets even more complicated.
adam_arthur 3 days ago [-]
Yes, I'd recommend a 5090 over the DGX Spark if your goal is general automation.
You can run multiple instances of these models in parallel on the DGX Spark which somewhat mitigates the difference if your task is parallelizable.
But I'd take the simplicity of a single thread and higher throughput personally.
Overall of course still better to wait for next gen devices if you can.
ozim 3 days ago [-]
I was expecting DGX Spark to run Gemma 31b Q4 much faster.
I was expecting it would run Q8 in 50 tok/s.
I guess that’s good I stopped thinking about buying it because I would be disappointed.
girvo 3 days ago [-]
I love my Spark-alike, but they really aren't inference boxes IMO. They're experimentation boxes. A couple of 3080 20GB's for cheap from China, a 5090, an RTX Pro 6000 if you can swing the horrible cost: those are better choices IMO
That said, I'm still running Step 3.7 Flash at ~40tk/s decode, 1000tk/s+ prefill on mine and its both very capable and fast enough
I got Gemma 31b to run on this at ~22tk/s decode at FP8 using MTP
gopher_space 3 days ago [-]
In my mind it’s a question of knowing what you want to build and how to divide the project into tasks your local setup can handle.
If you don’t need the machine to respond instantly (or explain your own business model to you) everything can be local and it’s been like that for a few years now.
msp26 3 days ago [-]
Yep agreed completely. I couldn't imagine torturing myself with a small model for local coding. But Gemma 4 31B is so fucking good for a variety of language modelling tasks.
freehorse 3 days ago [-]
> You have MoE models (gemma 26b, qwen 35b, north mini code 30b) who are pretty fast, but make a lot of mistakes
This is sadly also my experience. I wish we had some MoE models with a higher ratio of active parameters per total. My experience is that the newer MoE models that can run in a 64b laptop have too few active parameters to be useful outside narrower, specific tasks. Mixtral 8x7b was a 14b active parameter (56b total) MoE model a few years ago and was probably the best model one could run in that range for some time, but it is too old now.
I have been using the qwen 27b and it is great, but running a dense model like this in a macbook is a bit suboptimal, and i wish I could run sth faster than 15 tok/s.
c0rruptbytes 3 days ago [-]
I would try a 6-bit MoE and maybe with unsloth's studio, they claim to have auto tool fixing which is where i see a lot of issues with MoEs
I'm on a 48gb M5 Pro right now and it's been okay, a lot of my rough experiences have been with MLX and I'm finding that GGUFs are okay now
robomartin 3 days ago [-]
> On top of that, your laptop becomes a loud hot churning machine, it's uncomfortable to work with.
Laptop?
OK, I've made that mistake before. I understand modern laptops are powerful, but nobody wanting to do serious AI/ML work should be using a laptop for anything other than SSH or similar low-performance access into a proper system.
Years ago I fried two laptops just doing finite element analysis work running 18+ hours per day. It was one of those "I'm giving you all she's got, Captain!" workloads. They fried, even with powerful fans cooling them. I should have known better. Such workloads belong on purpose built systems.
locknitpicker 2 days ago [-]
> I don't know about good, I use a lot of local models and they're still pretty painful to run locally
You are somehow assuming cloud-based models are not painful.
I can tell you my past experience. I was using GPT 5.5 and Claude Opus interchangeably and I prompted them to implement a feature. I paid attention to the agent window and it was literally screwing up implementations, causing tests to fail, and going into test-fail-fix loops to clean up after itself. After a few minutes, it finally called it done. That run cost $0.60.
I went to review the code and only half of the source files complied with the instruction files. I prompted the model to clarify why it failed to comply with the instruction file. The model outputs "you are right, I should have complied with the instruction files. That prompt cost $0.30.
I prompted the model to proceed and apply the instruction file prompts. It went ahead and applied changes. Success. It cost $0.16.
I reviewed the code again. Only half of the sloppy code was touched up. I prompted it to fix the whole mess, not just a couple of files. It complied. One coin less in my purse.
So, around a third of the cost of a feature is spent on the model cleaning the mess it left in it's wake.
And this was a tiny feature with a plan, a solid set of instruction files.
Very expensive.
Are costs going down? I doubt so. OpenAI seems to still be spending 3 times it's revenue already.
In comparison, local models sound very good.
chrsw 2 days ago [-]
The very understandable desire to not have to rely on huge, centralized companies or powers for tokens has clouded people's judgment on how well these local models actually perform. They've improving, which is great, but for real work I use the best models available right now because they're so much better than local models.
segmondy 2 days ago [-]
I run 27B at Q8 with fp16 KV cache at 50tk/sec on 2 3090s. Not 4090, Not 5090. 6 years old GPUs.
hnlmorg 3 days ago [-]
To be honest even the cloud models are a hot mess at times. This week I’ve spent more time rejected code from OpenAI models than I have approving it.
In fact it really feels like OpenAI models have taken a nose dive this week compared with Claude. At least for my specific workloads (these things are so variable it’s like trying to compare Google results…)
Stagnant 3 days ago [-]
I've been using unsloth/gemma-4-31B-it-qat-GGUF daily for various small parsing and programming tasks using opencode and llama-server's front end. The past couple of weeks have made a big difference after google released the QAT variant and llama.cpp got support for MTP which means it is possible to now get 60-80 Tok/s with RTX 4090. The model fits in VRAM comfortably enough to keep it loaded even while browsing and having multiple programs.
amdivia 3 days ago [-]
110+ Tok/s as another data point on the RTX 5090 (Gemma 4 31B QAT + MTP at UD-Q4_K_XL) (at peak used 27 GB of vram)
The real lovely thing was getting 300+ Tok/s (Gemma 4 26B QAT + MTP at UD-Q4_K_XL) (at peak, I think I saw vram usage reach 21 GB of vram)
lmedinas 3 days ago [-]
the problem of that setup is that it will run out of context pretty quick. So for coding agent it will limit your workflow very fast.
xlii 2 days ago [-]
> I use a lot of local models and they're still pretty painful to run locally.
This really depends on how and what you're using. e.g. I can't suffer through slowness of inference on Macbook but I have gaming rig with quite powerful GPU and I squeeze ~130 t/s on Gemma or ~70t/s on Qwen.
Tuning is not optional as well. Qwen on temperatures > 0.5 is unusable for coding and I found sweet spot around 0.32 for coding. Speculative decoding on Gemma4 26B is a 30t/s difference between non-speculative.
The worst thing with local models is that I can't just give you a recipe, because what's the best params depends on your use case.
In the nutshell I'd compare local models to running game rig on Windows vs Linux. Linux works great if not better than Windows gaming, but you need to embrace some tweaking in order to get there. Is it there? It's not SOTA, that's for sure, but it's working reasonably well.
andy_ppp 3 days ago [-]
I wonder if it is better to have a machine somewhere running a model for you maybe shared with a few others. I could probably justify a M6 Mac Studio with hopefully 256gb RAM and have a few people all with access to one agreed upon model. I think maybe laptops are too warm and clunky for this.
wgd 3 days ago [-]
The problem is that the moment you introduce shared remote hardware there's a slippery slope leading right back down to "just pay an inference host for model tokens". If you're transmitting your prompts over the internet to a trusted host you might as well just let that host be DeepInfra or together.ai or one of the many other providers already in that business.
andy_ppp 3 days ago [-]
I dunno, I probably need the web to be able to do work so why does it matter - taking the simple case - of running just myself on a Mac Studio at home or cooking my self on the go I'd probably rather have a cheaper laptop and dedicated hardware. I think for many this is about having control over the model and not about farming things out to a SAAS... what does the saying say opinions are like again.
EnPissant 2 days ago [-]
When running on a GPU, dense models are shaping up to be the best way due to two things:
- Maximum intelligence per VRAM (you dont have much)
- Dense models can benefit from MTP to get an almost 2x speedup in decode (ie, a 27b dense model with mtp decodes at about the same speed as a MoE model with 14b active param model would). This is important because local llm rarely has parallel streams to batch together.
When running on large unified memory like Strix Halo or Spark Dgx, MoE models are usually best:
- You can get similar intelligence as a smaller dense model with fewer active params (to compensate for the slower memory) by throwing ram at the problem.
zozbot234 2 days ago [-]
The problem with batching local LLMs is not any inherent lack of multiple parallel sessions, but rather that local dGPUs lack the VRAM capacity to host KV-cache for several of those at once, whereas unified memory platforms broadly lack the compute headroom compared to memory bandwidth that would actually make batching useful.
(SSD streaming a larger-than-RAM model "solves" that latter issue very nicely because it radically slashes the equivalent to memory bandwidth so any saving on that becomes highly significant.)
nullc 2 days ago [-]
> This is important because local llm rarely has parallel streams to batch together.
I think most people using agent-like usage could easily run any number of parallel streams pretty often, but you run out of vram for multiple KV caches, unfortunately.
devilsdata 3 days ago [-]
Just to piggyback onto this comment; has anyone tried running multiple of these in conjunction? For example, having a Python script that has one of these orchestrate others, and offloads certain tasks to better/more powerful models, or even cloud models?
pizzafeelsright 3 days ago [-]
yes but then that defeats the purpose of 'local'
and if remaining local, the hardware required to run multiple poor models could be better spent running better models.
I have attempted to orchestrate using different models, loading and unloading, but the speed is not there and by the time mistakes are discovered considering the lack of quick iteration the results become worthless unless the task is trivial.
iwontberude 3 days ago [-]
They are good if you were clever enough to buy a powerful enough rig before memory went up. For everyone else I say just wait. M1 Ultra 128GB and higher is sufficient to run gemma4:31b-mlx or qwen3.6:35b-mlx with subagents. It’s only slow if you don’t know how to plan your work effectively.
heipei 3 days ago [-]
Depends on what you mean by "local". On your Macbook, large dense models like Qwen 3.6 27B will be slow, sure. On a local workstation with a dedicated RTX card you can get > 100 tps, which is more than good enough to work with it, and faster than cloud models in many cases.
jstanley 3 days ago [-]
But how smart is it? All the people running local models never seem to mention that they are way dumber than cloud models.
I don't care how many tokens per second of nonsense it can generate.
throwawayffffas 3 days ago [-]
Qwen 3.6 35b a3b is about as good as sonnet 4.5. It varies but it's at that level.
int_19h 11 hours ago [-]
Not even close.
It may be "about as good" on some very specific task.
heipei 3 days ago [-]
It is smart enough that I use for all my coding tasks, and a lot of other mundane tasks.
It is probably not smart enough for "design this whole architecture of this complex system from scratch, make no mistakes", but that is not something I want from a coding tool anyway. I want a model that I can point to a file and tell it to make some changes to the file and related files. Or that I can ask to review a PR with regards to certain aspects.
My suggestion is to simply try it and see what it feels like.
notnullorvoid 3 days ago [-]
Quantized Gemma 4 26B is as smart or better than GPT 5 in most of my testing. Granted GPT 5 is nearly a year old at this point, but I can run Gemma 4 on a ~6 year old consumer GPU (RTX 3090) and get 140 t/s.
lelanthran 3 days ago [-]
> But how smart is it? All the people running local models never seem to mention that they are way dumber than cloud models.
Well, you aren't going to give it a 20k line sec and have it churn out a full app after 4 hours hours.
But, you can get it to write code for you if you do the design.
myaccountonhn 3 days ago [-]
Its not going to be as good as Claude, but if you know what you're doing, it may be good enough to get your work done.
data-ottawa 3 days ago [-]
This is task dependent.
I find devstral (even though it’s weak generally) much better at writing and documentation than Opus. I’m actually now delegating all documentation to devstral and away from Claude, which makes a mess.
garciasn 3 days ago [-]
A highly skilled carpenter may be able to 'get work done' by banging nails in with a heavy-bottomed cocktail glass, doesn't mean it's not painful to do so when it is continuously breaking and leaving shards of glass all over the workshop for you to find every day for the rest of your life until you clean up the mess you made using the wrong tool for the job.
CamperBob2 3 days ago [-]
More like, a highly-skilled carpenter can work miracles with a $6 hammer from the hardware store, while the pros on the commercial crew are using fancy compressed-air tools.
The carpenter has to get up close and personal with the wood. He can't match the crew's throughput, but maybe that's not what he's trying to do.
mcbits 2 days ago [-]
I would say the hammer is no AI. Local models are the cheapest XKGYAGH electric nailer on Amazon that "works" but jams up all the time. The $20/mo cloud models are a nice DeWalt that gives an hour of jam-free operation but takes five hours to recharge. And if someone else is paying for it, one can use the heavy duty nail gun with a big generator and compressor on a trailer that can run all day.
sgt101 3 days ago [-]
If someone comes into the workshop and takes all the tools (hello Donald) then having a cocktail glass to hand might be a bit of a lucky break.
(geddit?)
c0rruptbytes 3 days ago [-]
I'm talking about the common use case that I think hacker news people have:
you get a macbook for work, you run the macbook
they're not going to start giving GPUs to employees to run local models
not_kurt_godel 3 days ago [-]
I had some local model FOMO, trialed for a few days, and tentatively arrived at the same conclusion. I can get a better ROI on the time I spent waiting and dealing with poor quality by just programming by hand myself instead.
NamlchakKhandro 2 days ago [-]
Pi mono is king. Everything else is hypetrash.
If I can't customise it then I won't waste my time using it it getting use to it.
Claude code is trash, it's customisability is extremely shallow, open code, codex, copilot, Kiro, etc etc... all trash. Yes even open code..
If open code was so awesome then open claw would have been based on it... But it wasn't. That's should tell you everything you need to know.
atomicnumber3 3 days ago [-]
I largely don't disagree with you but come to a different conclusion. I have two systems:
1) a "programming desktop" with a $500 upper mid range Ryzen (idr exact), 8GB VRAM Radeon card I bought solely for RuneScape, and 64GB ram
2) a maxed out Alienware 16 Area51, so it's a 5090 with 24GB vram and 64GB system ram. I bought it for gaming, of course.
I run qwen 3.6 35B A3B Q6 with 200k context window. I compare this to Claude pro max or whatever that I use at work.
The main difference between the machines is that the one with the RuneScape gpu does 10 TPS while the Alienware does 30-40tps. Both are fine though the 30-40tps is obviously a lot snappier.
I find with both models that:
- they do really well at "be a 30GB zip file of reddit and stackoverflow answers"
- they do really well at point fixing random bullshit errors that would otherwise waste my time (this is related to above of course)
- they do quite well at, given a pretty good specification of what you want, figuring it out, even if you've specified several steps needed
- they both cannot really be given a large ish task and left to just drive it on their own
The main difference between the two is with that last one, Claude is somewhat better and figuring SOMETHING out, but if Claude is having to figure it out, it's probably because I don't know what I want and it's very likely to not make a sane choice, and will generally produce slop given even the slightest amount of leash still.
I've also found that the boundary between "well specified small to medium thing" and "idk just do thing and figure it out" is the difference between you keeping control of the code and losing control. There's an "escape velocity" of AI use that, when you hit it, you're doomed to slop forever. (Or you have to deorbit... enjoy that). And while claude might have slightly higher velocity allowed while remaining suborbital, it's very diminishing returns.
So, are these models "worse" than Claude? Yeah. Am I looking forward to continued improvements? Yeah. But I now also have no desire to pay anthropic any amount of money, which has the nice side effect that i won't be helping them end up with so much money that they can distort our democracy.
smcleod 3 days ago [-]
Those dense models are pretty fast with MTP now. 40-70TK/s depending on your machine, that's faster than cloud models (although not as smart obviously).
FuriouslyAdrift 3 days ago [-]
Kimi 2.6 or 2.8 is what we are playing with locally. They need 512GB to 1TB to run with full capabilities so that's not exactly "desktop"
Our GPU computer server cost $110k.
abalashov 2 days ago [-]
But boy, it must be glorious. I use these through OpenRouter and rarely bother with Claude anymore.
greenavocado 3 days ago [-]
4 bit unsloth quants are good if you never ask for more than 20k context, use it as autocomplete on steroids, and never delegate serious questions to it
beadw 3 days ago [-]
I think you’re spot on. In my experience people confuse a models ability to solve some benchmark as a sign of its usefulness. Token throughput is often just as important from my personal usage. I am excited for more diffusion models to see how progress happens there.
peterlk 3 days ago [-]
Yes to diffusion models! Combo pipelines of generative and diffusion models have super interesting potential
ridiculous_leke 3 days ago [-]
A median laptop is no bueno for running a reliable model(which will be qwen 27b as per my reading here and r/localllama). Powerful macs would be prevalent in certain areas of the world but in rest of the world personal machines aren't always that powerful.
markdog12 2 days ago [-]
100% agree. I've spent many hours testing out local models/harnesses. So far, they're very much not worth the tradeoff. Obviously, I hope that changes.
dominotw 3 days ago [-]
maybe painful if you are using it like a chatbot. you are sitting there waiting for response. vs ambient ai like automatically classifying your family pics and discarding random things like parking floor number pic.
i use it usecases like that latter and they are fine.
onel 2 days ago [-]
Agree with this. Open models are the future but currently they are a pain to run locally.
As painful as it is to admit, the future might be cloud inference from a trusted provider.
everdrive 3 days ago [-]
What counts as a lot of memory? What could someone do with 16 GB of RAM?
throwawayffffas 3 days ago [-]
Not much, the capable models won't fit unless you go with very low quantization but that leads to a lot of loss.
You generally want to run q8 or some kind of "6bit" quantization at least.
40GB of VRAM is the entry-point in my experience, you can run qwen 3.6 35b a3b with full context or qwen 27b with about 92k of context.
Before you get fully discouraged, you don't need 1 gpu with 40GBs you can use multiple cards, with minimum impact on performance.
zozbot234 3 days ago [-]
Modern inference engines can stream in weights from SSD in order to save on RAM, but this makes inference very slow, especially for the trivial single-session case. (Jury is still out on whether batching multiple sessions together can mitigate this well enough, but even then that's mostly helpful for the "running lots of inferences overnight and getting fresh results first thing in the morning" case. Which is interesting (the big third-party suppliers don't really offer a way of doing this at reasonable cost) but a bit of a niche.)
abalashov 3 days ago [-]
Not a ton. I'd say 64 GB minimal to play, 96-128 GB better.
throwawayffffas 3 days ago [-]
Nah, you can run the 24b - 35b class with between 90k and 256k of context with about 40GB and they are pretty good. Especially the MOE variants fit neatly in 40GB.
abalashov 3 days ago [-]
Yeah, but then you need RAM for the rest of your OS and applications. I'd say 64 to be comfortable in the sense to which most HN users are accustomed.
throwawayffffas 2 days ago [-]
Sure sure, if you plan to run it on system ram instead of dedicated gpus then yeah you need an extra overhead to run your own stuff.
ValdikSS 3 days ago [-]
Gemma e2b, Gemma e4b. It's made for smartphones basically. You can run e2b with 8GB RAM.
trouve_search 3 days ago [-]
gemma 12B 4bit quant; try something with MTP and an AWQ quant
monegator 3 days ago [-]
gemma runs pretty well
adam_patarino 2 days ago [-]
I always find it amusing when people would rather spend $200 / mo than let their laptop fan turn on.
3 days ago [-]
naikrovek 23 hours ago [-]
> You have dense models (qwen 27b, gemma 31b) who are pretty smart, but pretty slow
slowness doesn't matter a lot to me, at home. I will type up a prompt and submit it and let it run while I do other things around the house. I have all kinds of things to do, and most of them do not require sitting in front of a computer.
of course faster would be better, but it's not always a requirement. smart and slow is far better than dumb and fast or even nothing at all.
citizenpaul 3 days ago [-]
They are still terrible at tool usage which loses 99% of the effectiveness of the agent. I've had to concede and use paid frontier models that can use tools or its not worth using agents....copy...paste....copy....paste....
iwontberude 3 days ago [-]
Your models aren’t big enough and they are forgetting about the tools. Try a larger model. If you can’t, then your rig was too underpowered anyways.
DiabloD3 2 days ago [-]
[dead]
iLoveOncall 2 days ago [-]
[dead]
hypfer 3 days ago [-]
After having been a happy user of Qwen3.6-27B for a few weeks, due to being away from the hardware, I'm currently forced to use Claude Sonnet 4.6
It is such a downgrade. I don't understand how that's even possible.
The thing has so many strongly-held opinions I did not ever ask it for, talking just way too much and generally feeling somehow dumber.
Of course, being significantly larger, it will encode more knowledge, but that doesn't help me when I hate talking to it.
And all that on top of the fact that talking with it costs real money.
I wonder what it might be that makes me hate it so much.
Maybe because it doesn't see itself as a tool but almost an equal? As if its opinions would have weight.
Qwen too can act like an overeager intern, but if you tell it that it is an idiot, it will drop that ego. Not so much with Claude. In my experience, anyway.
Anyway, point is: full ack on that headline.
ggerganov 3 days ago [-]
I haven't spent a dime on cloud inference, so cannot make a direct comparison like you. But I can 100% attest to the fact that Qwen3.6-27B is a very capable local model for coding tasks. Over the last month and a half I've been using it almost daily, either on my M2 Ultra or on my RTX 5090 box. I use it for small mundane tasks at ggml-org [0] - nothing really impressive, but definitely a helpful tool for a maintainer. I think I would be using it much more, if I didn't have to spend a lot of my time on reviewing PRs. Currently, I have a very lightweight harness - the pi agent with everything stripped (`pi -nc --offline`) and a short system prompt [1] to align it a bit with my style. About the generation speed: ~100-150 t/s on the RTX 5090 and ~40 t/s on the Mac. I definitely prefer running it on the RTX machine - it's so much faster. But for the sake of testing and getting wider experience with local configurations, I often run it on the Mac too.
I also confirm that local inference is on par with proprietary cloud services (with a bit of local setup, simple agents.md and some utils skills). This local models come with tools, that's mind blowing, considering that some months ago we had to .md tools ourselves.
What makes a model worth even more is "Memory". We implemented that long ago. Last time I used proprietary services was 3 months ago, don´t really need it, my subscription is going blank.
Gerganov, hope you will consider developing further the CLI cause we suffering with the server.
jayGlow 3 days ago [-]
what are you using for memory with your local models? is there a specific harness you would recommend for local agents?
mft_ 3 days ago [-]
I’m using Hermes at the moment - it comes with lots of tools already baked in for the agent to use - for example web and browser access just worked, rather than having to mess around loads with config scripts and plugins.
I’ve also tried OpenCode (similar but a bit less so) and Pi (fast but you have to add lots of features yourself which is a bit of a pain). Claude Code can also be pointed at a local model and works, but the default system prompt is huge. (~140k of text when I extracted mine, IIRC.)
vorticalbox 3 days ago [-]
[dead]
trilogic 3 days ago [-]
I use HugstonOne (that backend a personalized version of llama.cpp). Implemented it´s own double layer memory that recall the full or partial previous session/file with an ON/OFF switch (which picks up where left off in CLI or Server or both same time) and another that reads back a % of current tab if memory switch is off doing checkpoints every certain tokens, summarizing and referring back to it when needed (recalled by certain logics). There is more to it when involving local RAG (making it tripple memory layer) but thats a long story.
About the harness depends on for what you need it, but basically for a universal unit of measure, Harness is multilayered and logic and domain specific dependent. I would definitely include Type of Hardware, Model parameters/knowledge, Model Intelligence, Model size/context, type of conversion, type and quantization (models comes with some default tools), but adding your (domain specific), skills, tools, memory, logs, security, Rag, Online search... (which as scary as they sound are mostly simple logics in a txt file, like if this do that).
The full pack is Harness 10, every missing thing lower the harness score.
To answer to your question I would definitely recommend smth like HugstonOne (or anyway llama.cpp CLI) with Qwen 3.6 35B finetuned/distill (deepseek 4 or claude 4.7) with none of the current coding agents out there that are screaming internet connection and proprietary API and data collection. DO this, if you can find a tool that you can download and choose a local model (of your choice in whatever folder locally) and load it ready for inference without any need of internet connection that is the tool you should aim for. Right now there is none out there.
kpw94 3 days ago [-]
> About the generation speed: ~100-150 t/s on the RTX 5090 and ~40 t/s on the Mac
Curious if you can share the prefill speed too?
I run locally on a crappy desktop (some AMD iGPU with Vulkan llama.cpp, 32 GB DDR4 RAM) for experimentation. I get 15 tok/s on generation for the qwen & gemma4 MoE models. I get around 150 tok/s prefill speed.
Reason I'm asking about the prefill is looking at my stats at work, I use between 20M to peaks of 300M input tokens daily. Some of those token are cached but in general, I seem to have roughly 500x more input tokens than output. So interested in prefill tok/s stats.
Btw, based on your numbers, I think our use cases are quite different. I use the agent for very targeted sessions - basically things that are clear to me how to do, just want to automate them. My workflow is usually: new session -> read this, this and this -> do that. I.e. I don't let it wander at all in the codebase, so I rarely exceed the context window.
Also, I get a lot of mileage from the ngram-based speculative decoding functionality [0] as it allows me to iterate on the implementation much faster.
I do use it the same way as you're describing on personal projects at home, in a very crude manner (pasting code snippets in llama server web UI prompt. Next will attempt OpenCode)
At work I use it in similar manner with more mature tools, but the vast majority of token spend comes from a totally different workflow: "pretend the AI is a fleet of junior/intern engineer you're delegating work to", where the agent will on its own do the implementation, commit the changes etc.
It does indeed spend a lot of tokens wandering the codebase, talking to MCPs, loading skills etc.
girvo 3 days ago [-]
> Currently, I have a very lightweight harness - the pi agent with everything stripped (`pi -nc --offline`) and a short system prompt [1] to align it a bit with my style
This really is the secret to getting the most out of these models IMO. Pi is so damned good. I have a strongly tuned Pi for running Step 3.7 Flash (IQ4_XS) and Qwen 3.6 27B (FP8)
Also, thank you for llama.cpp mate :)
androiddrew 3 days ago [-]
I have never heard of step 3.7 flash. Why do you like it? What rough spots have you encountered?
celrod 3 days ago [-]
What quant do you run it at? 32GB seems like cutting it close on the rtx 5090 if going 8b, but other commenters are saying 4b lobotomizes the model.
ggerganov 3 days ago [-]
As a baseline, I run all models in Q8 [0] because I want to be confident that when I observe a problem, the root cause is not due to the quantization. However, in this specific case, I use Q8 on the mac and Q4 on the RTX machine because the latter does not fit the full context at Q8. So far, I don't have conclusive evidence that the Q4 quantization affects the quality in a significant way for this model and the tasks that I am using it for.
27B seems surprisingly resiliant to quantisation. Though my evals showed there was some impact to coding ability from 8 bit to 4 bit, it was less than I would've expected: and it was on task types that you've said above that you don't really do with these!
toddmorey 3 days ago [-]
For the curious, it looks like a PC with a RTX 5090 32GB graphics card will run you about $6,000.
3 days ago [-]
fridder 3 days ago [-]
Not too shabby. I like the regular Qwen but prompt prefill on my m1max is slow as hell
StevenWaterman 3 days ago [-]
Yep, I daily drive Qwen3.6-27B (including for work), have done pretty much since it came out. IMO it's the only (small-ish, local) model worth using, if you can run it. It might not be as good as Opus at "add X large feature" but I don't want that in a model. I want to do the thinking while it does the typing. And Qwen 3.6 27B is perfectly good at that (while in my experience models like the 35A3B and gemma are significant downgrades)
Plus, I never have to worry about rate limits, quotas, or sitting in a queue during peak time. And I can always see its full thoughts, don't have to worry about where my data is getting sent, and know it can't get secretly nerfed.
Running on 2x 3090, 500-1000tok/s prefill and 60tok/s output at Q6_K_XL with MTP on llama.cpp, 220k tokens context window (starts to get a bit dumb above 160k ish), no KV quantization
indoordin0saur 3 days ago [-]
> And I can always see its full thoughts, don't have to worry about where my data is getting sent, and know it can't get secretly nerfed.
For this reason I wonder if local models are a potential business opportunity. Provide the service to engineering teams to give them a pre-built and setup GPU rig they can run in a closet. No need to worry about all the things you mentioned and clients can rest-assured their data isn't disappearing into a sketchy data center. There might be regulatory reasons that make on-prem setups appealing as well.
I think that's overstated, but the loss of trust companies have with the big AI players is pretty serious. Not a big deal if your app is for sharing cat videos, but if you're medical or wealth management or a government contractor or the like enterprise clients really like to see good data security policies.
lelanthran 3 days ago [-]
> Not a big deal if your app is for sharing cat videos, but if you're medical or wealth management or a government contractor or the like enterprise clients really like to see good data security policies.
If this mattered to them, they wouldn't be running so much in the cloud or in proprietary software that they have no ability to air-gap.
If companies ever cared about this, Windows would not be dominant on the desktop.
indoordin0saur 3 days ago [-]
There are a lot of government jobs I know of that are absolutely air-gapped. Your computer has basically no internet access, everything is stored on-prem. Hedge funds also tend to be extremely locked down, from what I saw when I interviewed. With certain data sets either having strict encryption-in-transit or a being stored in a quirky on-prem service. I can't imagine they're going to be dumping their data into Claude, etc.
As to why Windows is so dominant, I'm as clueless as you.
suncemoje 2 days ago [-]
> There are a lot of government jobs I know of that are absolutely air-gapped. Your computer has basically no internet access, everything is stored on-prem.
I wonder if that's because they don't know better or because of a lack of trust or costs?
suncemoje 3 days ago [-]
Agree. I also wonder how zero e.g., Claude Enterprise ZDR really is, and what their data pipeline actually looks like.
amoshebb 3 days ago [-]
This is, as far as I know, the business model of coys like mistral and cohere
cyanydeez 3 days ago [-]
I think the next step to anyone but overbloated USA models is to follow https://chatjimmy.ai/ with one of the qwen models. If they can mass produce something at relative cost, these would be awesome sidecars.
hughw 3 days ago [-]
Just this morning I tweaked my single 3090 setup too:
If open models can ever hold roughly 600k token windows, I'll be really excited, I found that around 300 ~ 400k of Claude reading through your codebase results in better outputs. I also have Claude read official docs instead of "guessing" as to how to do something.
StevenWaterman 3 days ago [-]
I think we'll get there. Right now it works for me, because I'm naturally pretty verbose in my prompts, and know the codebase well, so I know what it needs to look at. Plus subagents for anything exploratory.
I think deepseek v4 pro has 1m context and does pretty well up to around 600k. But if you have the hardware to run that locally, you already know
Even then if there's a smaller model with 1M context, you'll need a ton of RAM to actually run it at full 1M. I guess that's why you don't see it too much. Anyone that could run Qwen 3.6 27B with 1m context would be better off running a much bigger model with smaller context instead, in the same amount of VRAM.
In terms of optimizing further, huge context + KV quantization sounds like a terrible idea, but there's some decent innovation in sparse attention, KV cache rotation allowing Q8 to perform nearly as well as full 16-bit precision, plus some ideas around offloading KV cache to system RAM (but I'm skeptical)
zozbot234 3 days ago [-]
DeepSeek V4 (both Flash and Pro) has very good scaling of context length wrt. RAM use, so this is not an inherent limit of LLMs in general.
cyanydeez 3 days ago [-]
I don't really think you're making reasonable decisions at that size; but I suppose if you're not allowed to refactor it, maybe.
I think the way these models work excludes sane behaviors the larger the context gets as each token introduces potential ambiguities between "USER" and "SYSTEM" messages leading to all the catastrophic behaviors.
Anyway, with AMD395+ I'm finding ~100k is both speed and context usefulness unless it's scoped tightly. with opencode, I manage it with dynamic context pruning: https://github.com/Opencode-DCP/opencode-dynamic-context-pru... ; then anything I touch ends up being refactored so context doesn't get bloated with unecessary functions, etc.
Obviously, this isn't compatible with certain business codebases, so I can see why bloat meets bloat.
0xc133 3 days ago [-]
With yarn and rope scaling arguments for llama.cpp you could run qwen3.6-27B with 1M context… if you have enough memory to store it.
QuantumNoodle 3 days ago [-]
Do you have any resources on hardware necessary for running models and tweaks? I see you mention 2x 3090 and I wanted to do more search on what hardware is satisfactory for what models.
iamtheworstdev 3 days ago [-]
are you running an NVLink? I have the same setup but no NVLink and it feels like it's best just splitting the 3090s to run separate models concurrently. But I also have no idea what I'm doing.
fluoridation 3 days ago [-]
It depends on what you're comparing. If the same model fits on the combined VRAM but not on a single contiguous VRAM, then it won't be faster to run two instances of it. If you're comparing a 23 GB model running duplicated vs a 46 GB model running split, then yeah, that will likely be faster, just because there's no synchronization between cards.
AFAIUI, there'd be little advantage in having a higher speed inter-card connection, because the cards don't really talk to each other during inference. The loss of efficiency compared to a monolithic memory architecture comes from scheduling, not from data transfer.
Andrex 3 days ago [-]
How long have you been using it?
epistasis 3 days ago [-]
> talking just way too much
OMG this is such an annoying property, just shut the hell up please, and be concise.
I suspect that this is an artifact of the thinking property, but please just summarize the thinking process far more concisely, where a single sentence answer is more than sufficient the frontier models seem devoted to going on to a minimum of 5 paragraphs and offering 3-5 new directions.
And requests to please only offer a single step at once, or single option at once, or to even stop eagerly offering future directions is really hard to prompt correctly.
And look, there I did exactly what I was complaining about...
bityard 3 days ago [-]
I'm not sure to what degree you can influence how a model thinks, but you can definitely hide the thinking tokens and tell the model how you want it to talk to you.
For example, the Claude web UI has an Instructions field where I have told it never to congratulate or praise me for asking questions. Earlier Copilot models used a ridiculous number of emoji and bullet lists when answering literally every prompt, I told it to knock that off and prefer detailed paragraphs in prose.
Local agents/frameworks/whatever all have their equivalents for overall user preferences.
epistasis 3 days ago [-]
Thanks for the reminder! For others looking for this setting, it is currently under User Menu (click your account name in the lower left), then "Settings", then the "General" tab there's an "Instructions for Claude" box.
Asking Claude for this provides incorrect instructions for me, so I'm guessing it moves around a lot.
illegalsmile 3 days ago [-]
That's why you have to give claude and others directives/.md at the beginning so it doesn't go off the deep end with suggestions.
epistasis 3 days ago [-]
Yeah, I've tried, and I'm sure somebody is going to say "skill issue" but it's not so easy to get the model to do that. Maybe it should be a SKILLS.md issue.
Edit: also, how can I stop the LLM from all this fake glazing, as if every question I have is some sort of unique genius insight, it's so damn annoying. I just got the third straight round of this while merely trying to get summarization of a PDF:
> Good question — it gets right at a real tension in the paper. Let me check the current state of actual SV-imputation efforts, since this has moved since 2020.
bornfreddy 3 days ago [-]
I didn't try telling to be concise and stop pampering me yet (but good idea, tomorrow), however I found that instead of me writing agent instructions, it works much better if I tell claude to write instructions for itself. I do check if they make sense of course, but its wording works much better than mine.
frereubu 3 days ago [-]
[dead]
derethanhausen 3 days ago [-]
I would not generalize based on experiences with Sonnet. The flagship models (Opus being the claude equivalent) are dramatically better.
hypfer 3 days ago [-]
Opus in my experience is equally unpleasant "character"-wise, but at least it actually gets stuff done more often, so it's at least slightly more earned at that.
It's still a neurotic cargo-culting dogmatic idiot, but one that at least sometimes does produce deliverables instead of only bottom-tier HN-esque opinions.
Hmm. I think I might just fundamentally disagree with Anthropic about the idea of what a "tool" should be.
hypfer 2 days ago [-]
This morning I have been blessed with an example of the exact behavior that is so infuriating.
> But re-reading the comment:
> "In the real world however, it does not. Hence, in the future we might fail this check even if it works within this limited check."
> The comment says "we might fail this check even if it works" — implying the original intent was to always fail (return 1) as a conservative stance, leaving room to tighten it later. The new code does the opposite of what the comment describes.
> So either:
> 1) The comment needs updating to reflect the new intent, or
> 2) The logic is wrong and should still return 1 unconditionally if the original intent was preserved.
> Which is it — did you intentionally want to succeed when X works, making the comment outdated? Or should the return 1 be restored?
> User: did you see the "in the future"?
> Yes, fair point — "in the future we might fail this check" is forward-looking, not a statement of current intent. The comment is saying the door is left open to tightening the check later, not that it should currently always fail.
So the current code is correct and the comment still holds. All good.
___
It reads/comprehends 5% of what is on screen but acts like it knows it all, bossing you around.
Why is it like this. What's wrong with Anthropic and what's wrong with people _not_ getting incredibly angry at that unearned smartass.
npodbielski 2 days ago [-]
Well there are in a business of selling you quote ubquote, intelligence, so it does what they want it to do: imply intelligence, which for me is just an illusion. But on the other hand this is what politicians and other conmen are doing? Using a lot of words and say nothing of value?
Also: more tokens.
KaoruAoiShiho 3 days ago [-]
Fable largely fixed the annoying chatterness so sucks that it's gone now.
kitd 3 days ago [-]
Funny that coding agents have personalities, including "that colleague" you want to avoid even if you know they're probably quite good at what they do!
otabdeveloper4 3 days ago [-]
That's exactly what RLHF is for.
(In fact, "that colleague" might have even been the source of the RLHF training set.)
radium3d 3 days ago [-]
If you think about it, they're splitting the power across millions of users. Essentially, these AI companies have YOUR hardware that YOU are paying (them) for in a cabinet at some data center. This means the hardware could easily be run locally for inference for these 'big' models. It's just a problem of dynamics-- RAM is being bought in bulk by these companies through these B200 style cards, instead of sold slowly through the open public markets.
This is likely due to a combination of mass funding for the AI companies, but also they are trying to governmentally restrict which countries get access to these cards so certain countries get a head start. The only way to lock that down is to have them literally locked in their own GPU prisons (data centers). Third reason is it does make it possible to train the models faster by having them in the same data center connected directly. Having them distributed to everyone would slow down training considerably.
The current way to 'own' decent RAM and GPUs right now is through the stock market it seems.
giancarlostoro 3 days ago [-]
There's a model on Huggingface where someone takes Qwen and makes it think Opus style, and that one seems to be decent, not sure if they have the 27B variant in that style. I do wonder if you can tweak your system prompt to force Qwen to behave better?
StevenWaterman 3 days ago [-]
You read the OP backwards, they said Sonnet is a downgrade from Qwen, and prefer Qwen's tone
giancarlostoro 3 days ago [-]
Sure, but my argument still holds, the idea is that Qwen reasons the way that Opus on High (what is now Max or whatever?) level thinking to reason about problems instead of its standard approach.
whythismatters 3 days ago [-]
Yes, Qwopus :) I've been pleasantly surprised by its quality
giancarlostoro 3 days ago [-]
Seen that one too, same guy I'm thinking of too, havent had a chance to try all of their models. For anyone curious I believe the username is Jackrong on huggingface? They've got several models out on there each focused on programming from different approaches.
bjackman 2 days ago [-]
Re being away from the HW: with Tailscale and llama-server it's now super easy to just run an inference server at home and use it from wherever you are.
npodbielski 2 days ago [-]
Exactly what I do!
You can have web UI for PI!
MostlyStable 3 days ago [-]
Curious if you have tried custom instructions. I was never quite as unhappy with Claude's voice as you appear to be, but there were several things I didn't like. A custom prompt fixed almost all of them.
clickety_clack 3 days ago [-]
I think it would be very hard to convince someone to pay $100/mo to go back to Claude if they have a local model up and running, particularly now that model improvement has basically been stalled for the last 6 months. It’s so easy to set it up for yourself now too with things like LM studio. That said, there will always be unsophisticated users who can’t figure it out, so there will always be someone there to pay.
MostlyStable 3 days ago [-]
The person I was replying to specifically said that the Claude will "encode more knowledge" and that their problem was that they didn't like talking to Claude. It sounds like they think that Claude is at least slightly more functional. And the "not liking talking to it" is probably fixable. Someone for whom a local model works, and for whom the economics make sense, should absolutely run a local model and I wouldn't try to convince them otherwise. I'm sure it's the right choice for a lot of people. But not liking the personality of Claude is probably not a great reason on its own, given the minuscule amount of effort it takes to fix.
Scoundreller 3 days ago [-]
The third category are the occasional users that won’t have the hardware and won’t stomach a monthly fee for “unlimited” but are happy to pay-per-use.
I’d think the volume for that category would be low but LLMs aren’t just for coding.
dghlsakjg 3 days ago [-]
I’m probably the third category. I like experimenting and trying different models and techniques. I want api access for my own apps and Claude subscriptions don’t have that.
Sure I could splash out a ton of money for a high ram Mac, but deepseek is so dirt cheap that I think depreciation on a high end machine costs more than my api spend.
Example of what I’m using it for: building a semantic database of podcast content (podcast discoverability sucks on an episode level). I need a cheap LLM, an embedder, a transcriber, none of which Claude will do.
My api costs for coding agents plus running apps are about ~$20/month, but I get more than just chat + Claude code.
If all I was doing was pumping an employers codebase through a coding agent, Claude would be the answer.
chrisweekly 3 days ago [-]
Not everyone has the right hardware.
clickety_clack 3 days ago [-]
I guess I’m thinking of the $100/mo users, for whom it’s probably possible to get the right hardware.
lukeschlather 2 days ago [-]
The hardware to match Opus costs at least $200k, and you have to maintain it, and it's still not going to be as good.
linuxhansl 3 days ago [-]
How qwen3.6:27b compare to qwen3.6:35b-a3b (MoE) in your experience (if you tried). I find the dense models are way too slow on my H/W.
hypfer 2 days ago [-]
I don't really like them tbh.
They are a lot faster, yes, but at least for my needs, they feel a lot dumber too.
It's a shame that the gemma4 that _would_ fit 24GB VRAM is MoE. :(
npodbielski 2 days ago [-]
[dead]
andix 3 days ago [-]
Sonnet is extremely overpriced. It's a good model, but not worth the money Anthropic charges for it.
Shorel 1 days ago [-]
I use tailscale to have remote access to my local models when on the move.
dyauspitr 3 days ago [-]
Why would I want some half assed coding assist tool. I want something that takes in a requirement and spits out a finished product. It’s not your equal, it’s better than you.
3 days ago [-]
dackdel 3 days ago [-]
what kind of hardware do you need in order to run qwen3.6-27b
giancarlostoro 3 days ago [-]
Depends on which variant you pull down, but a single 5090 GPU (I know these are insanely expensive, but for context) could run either the Q8 or Q4_K_M version. It will not fit the 52GB version (BF16) on the other hand. So any modern Mac with a Pro or better processor and more than 52GB of RAM (don't forget VRAM for context window also matters!) would suffice, as someone else noted, probably a 128GB model would do the trick, and give you enough wiggle room to max out the context window.
My Mac only has 16GB of VRAM (20GB total - 8 is reserved for the OS) so I have to leave room for VRAM, I usually find a model that fits in 5 to 7 GB of VRAM and then max the context window as much as I can.
daemonologist 3 days ago [-]
The benefit of running the full precision version is negligible (probably not even measurable above the benchmark noise floor). Most common for cost-conscious users is to run something around 4-6 bits per weight, which would fit on a 24 or 32 GB card (as you mentioned).
pixelesque 3 days ago [-]
Note you can change the amount of shared (V)RAM reserved for the OS with:
sudo sysctl iogpu.wired_limit_mb=18800
will allow you to use more, but you do need to leave a bit for the OS obviously!
giancarlostoro 3 days ago [-]
Oh man! I had no idea I could do this at all! What do you usually tweak it to? I feel like 8 GB is probably still a reasonable amount to give the rest of the OS.
pixelesque 3 days ago [-]
I've got a 32 GB MBPro, and I set it to 27700, which I haven't seen a problem with so far.
giancarlostoro 2 days ago [-]
Makes sense, in my case, I've got 24GBso I guess, cranking mine to roughly 20 might not hurt?
dackdel 2 days ago [-]
thanks
iagooar 3 days ago [-]
I recommend MacBook M5 Max with 128 GB of RAM to run it comfortably and fast. If you have something like a regular M4, go with qwen3.6-35b-a3d - the Mixture of Expert architecture makes it run 2-3x faster than the 27b version.
dackdel 2 days ago [-]
thanks
sbmthakur 3 days ago [-]
I could run it on 7900 XT with 64k context. You could run it more comfortably on a 24 gb vram.
dackdel 2 days ago [-]
thanks
npodbielski 2 days ago [-]
I bought r9700 for about 1700-1800$ and I have like 800t/s prompt and about 50t/s of inference on average? It hurt a bit when you change a prompt so llama.cpp have to discard entire cache and it have to think for 2-5min depending on the context, but otherwise it is faster than I can read.
indoordin0saur 3 days ago [-]
Very curious what hardware you're running this on!
hypfer 3 days ago [-]
The same 24GB VRAM RTX 4090 I bought to play Cyberpunk 2077 with.
Works perfectly fine in llama.cpp throwing 70+t/s at me with 128k q8 K/V context when using the IQ4_NL quant + MTP at q4 MTP K/V.
Nice! Do you do anything with that compute when you're not actively using it? Is the crypto-mining hobby still worth it? I've also wondered if such expensive hardware can be rented back out to offset cost. Looks like these cards are going for as much as $4k nowadays.
all2 3 days ago [-]
There are services where you can hook your card up and rent it out to other users. I don't know what any of them are called, but they do exist.
dghlsakjg 3 days ago [-]
Salad.com is one. (I’m unaffiliated, just happened to come across it this week while looking for a cheap option)
hypfer 3 days ago [-]
I've paid ~2k€ in 2023. Since I'm usually sitting next to it, I'm only using it when I want to use it. It can get quite loud and warm.
Crypto (to my knowledge at least) moved away from GPU mining.
I guess you could maybe rent out GPU compute, but - being in germany - it's not worth the legal hassle.
You could of course always commit tax fraud, though I wouldn't recommend that.
esseph 3 days ago [-]
> I've also wondered if such expensive hardware can be rented back out to offset cost.
Massive legal liability. Not worth it.
Rzor 3 days ago [-]
Can you fix MTP-GEMMA-4-26B-A4B-IT? It says the weights are 0.5 GB in size.
edit: nvm, I'm confusing models.
3 days ago [-]
cdelsolar 3 days ago [-]
What did you call me?
mik09 2 days ago [-]
try qwen 3.7 or glm 5.2 or one of the larger gemma models
cmrdporcupine 3 days ago [-]
The Anthropic models have always been annoying this way -- chatty/opinionated and Dunning-Krugerish. And love to run away and do things unprompted with me jamming my ESC ESC ESC key over and over so I can get a word in edgewise.
FWIW Codex/GPT models are way less this way. Maybe to a fault.
I'm setting up my DGX Spark to try Qwen 3.6 27B again, as I'm hearing a lot of good reviews. When I tried it some time ago it was still early for support in llama.cpp.
zerd 3 days ago [-]
I noticed Fable was quite a bit terser, and I think it's due to changes in the system prompt [0]. They're literally saying "just give me the TLDR" and "give brief updates". You can tweak a lot of that with an AGENTS.md.
Well but comparing with sonnet 4.6 instead of opus 4.6,.7 or .8 doesnt make a real point
I mean, pay 200 USD/month (if you have that cash, or your company has it), might not justify using local at all (unless you have some reason to suspect about data leakage)
calebm 3 days ago [-]
sync/ack
rmunn 3 days ago [-]
This is the kind of thing that Anthropic et al should be worried about. As it becomes easier and easier to run local models, the ceiling of what they'll be able to charge will get lower and lower. Not that nobody will be willing to pay $$$$$ per month, but a lot of people are going to multiply the per-month charge by 12 or 24 and say "Could I set up a local model for less than that, and have it pay for itself within a year or two?" And if a significant portion of customers decide to buy instead of rent, the companies whose business model is entirely centered around renting will suddenly find themselves hurting for customers.
sathackr 3 days ago [-]
The opposite of that has been happening for 20 years now with cloud compute.
It won't happen with AI models either.
It's almost ingrained in the American business model now. Outsource everything. Nobody wants to manage a room full of servers when they can spend 2-3x as much and outsource that headache along with the responsibility for it.
Same will happen with AI. Whether that means paying Anthropic that premium or paying AWS.
I'm in a relatively small business, we recently had an outage related to our local infrastructure.
I got pressure from the CEO saying it wasn't reliable to host our own infrastructure anymore even though our total internal down time over the last 5 years is significantly less than even a single of the larger recent AWS outages.
Everyone wants to shuck the chore and the responsibility.
preommr 3 days ago [-]
> The opposite of that has been happening for 20 years now with cloud compute.
It won't happen with AI models either.
AI is different.
Cloud computing genuinely is cheaper on average. It's better than paying for cisco servers, and at scale, it's cheaper than managed platforms (ala Heroku), and it's a coin toss for when you're in the middle ground and constantly approaching the point of rebuilding poor-man versions of existing products but with very very expensive engineering salaries.
In contrast, local models offer dramatic savings, and are magnitude of orders better in certain aspects: like stability - the performance is all over the place with traditional AI companies as they divert compute to their next big thing.
The benefits to maintaining your own infrastructure are pretty moderate to low, with very high risk.
And also, alternate models are pretty easy to use and easy to swap out unlike the vendor lock-in that exists with cloud services.
codethief 3 days ago [-]
> AI is different.
I agree. The other thing here is that, once you can run LLMs on a single piece of commodity hardware (whether that includes one GPU or several), the difference between cloud vs. on-premise LLMs will largely be about where your hardware is located. There will be very little software configuration involved (just an HTTP endpoint that talks to the GPU). This is decidedly different from cloud products where the moat of hyperscalers is largely in the software and services on top of the hardware, not the hardware itself. (Sure, GPUs will eventually break & need replacement, too, but there's no state to lose, so that's already orders of magnitude easier than replacing hard drives.)
rmunn 2 days ago [-]
There's also a difference in the cost of downtime. A server hosting your website or SaaS, if it's down for five minutes, costs you a lot of real revenue. So you plan for redundancy, you set up automatic failover so that if one node goes down the next node can handle the load while the first one reboots, and so on. But for the LLM that's just serving your local model? You can tell everyone "Hey, we're taking it down for a 15-minute window, so plan your lunch break while it's down". Unplanned downtime can interrupt what people were doing and cost you productivity and thus money, but it's a lot easier to schedule planned downtime and have people work on non-model-using tasks during those periods: the model is helpful, but not essential.
richardwhiuk 3 days ago [-]
There's no economic reason why running a model locally should be better than using a cloud hosted version.
moregrist 3 days ago [-]
“There is no reason anyone would want a computer in their home."
- Ken Olson, Founder of Digital Equipment Corporation, in 1977
mcmoor 2 days ago [-]
In hindsight this is getting truer, what with the push of dumb terminal for everyone
mikegioia 1 days ago [-]
Everyone has at least one in their pocket right now though.
spockz 3 days ago [-]
Sure there is. Keeping your IP in house.
RevEng 3 days ago [-]
You pay a 3x markup to rent a server through AWS than managing your own. You pay for convenience. At shall annals that's fine, but for large companies with their own datacenters, you generally do things in house.
15155 3 days ago [-]
> Cloud computing genuinely is cheaper on average.
For some applications, sure. Availability is a large part of what one is paying for with cloud computing, but it's also something that not every business needs.
If you sacrifice availability and have a pure-compute use case (low durability requirements), on-prem can quickly end up cheaper for far better hardware.
npodbielski 2 days ago [-]
AI is different because you can't encrypt it. An running on someone else's hardware is basically just 'trust me bro! I won't read it!'. Of course you can say that about I.e. database too, but at least you can run it on your own dedicated hardware in some datacenter, so it is password protected, you can encrypt it at rest and you will only know the key.
With AI, no, you can't . model needs plain text to be able to work. If somebody will be able to figure out models with asymmetric keys will make a lot of money.
TkTech 3 days ago [-]
For many companies (country-dependent) that's not really why they use cloud services vs purchasing. It's tax shenanigans and business process overhead. OpEx vs CapEx, and a small (%) bump in the huge AWS bill no one will even notice or a $30k+ invoice for hardware that has to go through rigorous review and 3 departments.
Same reason people pay for things through the AWS marketplace (like Vanta) instead of having to go through their invoicing process.
codethief 3 days ago [-]
Good point. Maybe there'll be companies that maintain your on-premise GPU cluster just like there are companies that service the coffee machine in your office?
mohamedkoubaa 3 days ago [-]
This is far more likely than everyone racking their own servers.
otabdeveloper4 3 days ago [-]
> on-premise GPU cluster
Renting a GPU server from a cloud and hosting your own llama.cpp is the path of least resistance.
dreambuffer 3 days ago [-]
It's just not comparable though is it? You need cloud services because it's physically impossible to use your single home computer as a server, CDN, load balancer, mass storage, security service, and distributed system.
But AI is just weights, you can run a reasonably intelligent model at home, or on a few GPUs if you're a small-medium sized company, and it doesn't require dedicated maintenance.
pessimizer 3 days ago [-]
If you're a medium-large company, you should definitely run your own AI because you can max out the CPUs more often. You're not only able to run privately and locally, but you're also able to run efficiently.
cheema33 3 days ago [-]
> I got pressure from the CEO saying it wasn't reliable to host our own infrastructure anymore even though our total internal down time over the last 5 years is significantly less than even a single of the larger recent AWS outages.
Same here. My job as a software dev does not require me to self-host services we need and use. Quite the opposite. But, I am reluctant to hand over all control to AWS or equivalent for several reasons that I will get into here.
I have found that Infrastructure as Code (IaC) and modern tools like opentofu, ansible, combined with frontier AI models and harnesses gives you superpowers in this space. Almost all of our self-hosted services are fully managed by these tools. e.g. We perform backups and test them more often now than we ever did before. Entirely because it is so much easier to do all of that now.
Terr_ 3 days ago [-]
IMO local-vs-cloud may be a misleading dichotomy, versus:
1. Individual dev machines
2. Shared local server
3. Shared server in corporate cloud
4. Third-party LLM SaaS provider
Even if you don't want your laptop melting, there are still some important differences between 3 and 4 in terms of data privacy and security.
wraptile 2 days ago [-]
> It won't happen with AI models either.
AI is definitely different. Cloud compute is incredibly convenient to the point where even if AWS is more expensive it's just so _nice_. LLM models are much more abstract and while I can't easily swap AWS for Hetzner to save 80% of my costs I can absolutely get close to that for many of LLM tasks, even today.
I suspect Anthropic and gang all know that that's why they are buying up dev tools and shifting towards long-running agents because that's where they can get AWS's "nicesness" that they can charge for.
rapidfl 3 days ago [-]
There is efficiency in the cloud model for models. So maybe there is a scope for Apple or an "Apple for AI" in the AI compute game - mainly from the perspective of privacy etc.
And once the servers are in space, everything is fully out there.
davidw 3 days ago [-]
Still though, perhaps the existence of low-margin, generic, cloud LLM's puts some downward pressure on the 'brand name' companies?
frobisher 2 days ago [-]
I suppose cloud won because:
- nobody wants to deal with the networking stack on the internet
- you want servers alive all the time
- it's businesses running their software on servers to serve to customers
Do these apply to AI?
derfurth 3 days ago [-]
That's an interesting take, however there is no ongoing maintenance related to local models, maybe the only effort is giving more capable machines to the workforce; but yeah I can see how it might feel like a barrier.
sathackr 3 days ago [-]
The hardware, the power systems, the cooling systems. They need maintenance.
The OS needs updates, file systems get corrupted.
Fans get dirty.
All the things that you need to deal with in hosting your own server infrastructure you have to deal with when hosting your own AI infrastructure (which runs on servers...)
ajb 3 days ago [-]
However, you can get many of the benefits of a "local model" by outsourcing all the hardware maintenance but still using an open model. Guaranteed repeatability for one.
A lot of the reason people outsource normal software is its brittle security properties, not sure that even applies to an LLM - it can go and look up the latest security best practices just like an engineer can.
chris_money202 3 days ago [-]
on prem cloud is harder because of the scale up and scale down requirements. If you are a growing business which most decent ones are, you constantly have to think about that.
matheusmoreira 3 days ago [-]
> Everyone wants to shuck the chore and the responsibility.
Which gives all the power to the big techs. I'll never understand why the average company seems to have no problem with this.
akoboldfrying 3 days ago [-]
Did you build your own house using tools that you forged from iron-rich ore yourself? Did you grow your own wheat to make bread for your lunchtime sandwich today?
There's a reason most people pay other people to do these things for them.
keeda 3 days ago [-]
It's a longstanding management principle, so old that people may not even say it explicitly any more, which states "focus on your core competencies," the corollary of which is "outsource anything that is not a core competency."
I can see how it makes sense for companies, because money is "only money" but an ongoing operational distraction can be much more costly, as in, it can be detrimental to the success of the overall business.
otabdeveloper4 3 days ago [-]
> in the American business model
AI company valuations won't survive if they're only for the "American business model".
mohamedkoubaa 3 days ago [-]
Exactly. American businesses aren't even particularly efficient or well run
CamperBob2 3 days ago [-]
outsource that headache along with the responsibility for it
You know what gives me headaches? When I'm in the middle of a session and the model gets rug-pulled out from under me because somebody at the model provider didn't pay the Trump bill that month.
Or when someone at the model provider decides that the curve-fitting algorithm in my graphics package looks a little too much like Skynet for comfort.
Or when they do any number of other things to undermine my work for the sake of their business model, some of which I won't even notice until the damage is done.
The sad thing is, if you know how inference works, you know that it really is insanely wasteful for everybody to run it locally. If anything naturally belongs in the cloud, it's inference. But at the same time, what choice are we being given?
mohamedkoubaa 3 days ago [-]
What about inference suggests it naturally belongs in the cloud?
CamperBob2 3 days ago [-]
Inference basically looks like this (neglecting a whole bunch of stuff):
for t in tokens_in_context
for p in model_weights
do something with p*t
The expensive part is fetching each weight from memory, which is why VRAM/HBM is such a big deal. Conceptually, for a huge, dense (non-MoE) model, the inner loop might run a trillion times for every token generated.
Obviously that's not how it really works in practice, but the point is, if you are only running one prompt at a time, each weight gets fetched, applied to the token being processed, and then never touched again until the next token is processed.
So when you submit a prompt to a model that's running a bunch of other peoples' contexts concurrently, it can reuse each weight multiple times before moving on to the next one:
for p in model_weights
for u in users
for t in u's context
do something with p*t
The same is true in an agent-heavy scenario where you have several contexts in play at once.
Worst case, in terms of energy efficiency, is a single user sitting around waiting for a single response. I don't feel like I'm explaining it well, but the core idea is that every time a weight is fetched from memory, you want to get as much work done as possible with it.
mohamedkoubaa 3 days ago [-]
That makes a lot of sense, thank you. I think a pirate cloud of local models could make sense, but that would be regulated into oblivion
indoordin0saur 3 days ago [-]
I'm curious when coding-heavy companies will start running their own on-prem AI clusters. Has anyone had the idea to sell something like 4 GPU machine an engineering team could throw in a closet somewhere and run whatever they want on it? I imagine this won't appeal to everybody but with the trust issues the hyperscalers have developed hoovering up people's data and using it to train their models, I imagine some will find value in a machine and model they have transparent control over including the option to walk over and unplug the thing.
CamperBob2 3 days ago [-]
Has anyone had the idea to sell something like 4 GPU machine an engineering team could throw in a closet somewhere and run whatever they want on it?
I think that's basically Geohot's business model at Tiny Corp.
starshadowx2 3 days ago [-]
Earlier I was thinking it's maybe comparable to paying for Netflix vs torrenting and running Plex or something. For the majority of normal, mainstream users I feel like most would just pay for the thing that is already setup and ready for them. There'll still be all the more techy or determined types who will do it themselves, I just wonder what the percentages of both groups will be.
aeonfox 2 days ago [-]
> I feel like most would just pay for the thing that is already setup and ready for them
Nothing stopping turnkey OSS AI hardware being productised, including niceties like opt-in automated updates. If the trend continues of models becoming smaller and more capable for everyday use, it also derisks against obsolescence.
rapidfl 3 days ago [-]
if we get to the stage where the AI hardware is a more of a commodity and usability becomes 10x simpler, then people may buy their own hardware and run local models.
Everybody owns a car, washer, TV, etc today. Maybe one could finance a server-box/trailer costing $20k, trade it in every 7 years for a newer model, etc. Many people are going to own a $20k Optimus.
fragmede 2 days ago [-]
The car, TV, washer, and whatever humanoid robot finds product market fit physically need to be in my house, or close to it, in order for them to be useful to me. Thanks to the Internet, the data center doesn't need to be, like at all. Economy of scale says that renting a slice of time on the most expensive GPU supercomputer out there is going to be faster and also probably cheaper since I'd only be getting a slice while the server is serving multiple users.
jhonof 2 days ago [-]
Why don't you just buy a chromebook or equiv and do that now then?
storus 3 days ago [-]
They are working hard on you not being able to run a thing locally. OpenAI buys all RAM on the spot market, causing the rise of RAM/VRAM prices 6x, making GPUs and decent computers unreachable for the majority of the population. OK, some richer folks might be able to get a 512GB MacStudio or a single RTX Pro 6000 for 13k and be able to run some decent local models, but the vast majority will need to use API. And at some point Nvidia might say: "We don't sell that many 6000s, so let's just cancel them altogether as we can gain 4x profit on datacenter-only GPUs" and then they'll become unobtainium and no private person would ever be able to run anything decent (~1 year behind the frontier) locally.
nodja 3 days ago [-]
I wonder if this move will backfire on them. All the fabs are focusing on HBM and leaving DDR behind, if one of the big frontier labs folds all the memory fabs will be left holding a big bag of HBM memory. They won't have any other choice but sell for cheap so it wouldn't surprise me if we see a return of HBM in the consumer market in 3-5 years.
wuliwong 3 days ago [-]
These local models can do some of the work the non-frontier models can do but for me, that's not worth much. If I am just using Sonnet 4.6, I can pretty much work all day on the $20/month plan. And Sonnet is still a way more powerful model than a one you could self host on an M2 mac.
If things change to token usage billing for everyone, maybe I'll be singing a different tune but on a subscription, I don't think it makes sense financially.
Fun? Yes. Financially sound? No.
mohamedkoubaa 3 days ago [-]
What about when the gravy train stops and Sonnet is priced with some marine above the cost to provide it?
bityard 3 days ago [-]
The general consensus is that local models will continue to improve drastically, but hosted models will as well. There will _always_ be a pretty big gulf of capability between what you can do with a desk full of hardware at home vs a few racks of hardware in a datacenter. That seems to be the real "moat" of hosted models at this point in time: access to capital.
What's interesting/exciting is that local models are _already_ quite good at tasks we never imagined AI _ever_ doing before ChatGPT hit the scene just a few short years ago.
We're also in an interesting point in time where companies are releasing the fruits of their research/labor (the LLMs) to the general public for free. For now, I think they see it in their best interest to gain mindshare and rapport, as well as advancing the state of the art in smaller LLMs ("a rising tide lifts all boats") but I fear and expect that these will dry up as the major players buy the minor players, and all will seek a return on their considerable investments in AI research.
cogman10 3 days ago [-]
I believe there's a level of diminishing returns. Sure, SOTA will probably always benchmark better than local models. But do we need it? That's the question that the likes of OpenAI and Anthropic should be worried about.
regularfry 3 days ago [-]
The difference won't be in the individual tasks. It'll be in the scale of job they can take on and how you interact with the model. Think of pairing with a junior vs replacing a full delivery team, that's the sort of difference we'll be looking at. We'll be able to get closer to the latter by being more clever with harnesses, I reckon, but the frontier labs will run ahead because for any given harness trick they can lean harder on model smarts.
cogman10 3 days ago [-]
True, but my point is that if/when local models get to the point where they are capable of doing the "delivery team" work what's next? What can these bigger SOTA models offer? And especially what can they offer above and beyond what you might be able to get from much cheaper models which the open models are based on?
That's what I mean by diminishing returns.
cpt_sobel 2 days ago [-]
> There will _always_ be a pretty big gulf of capability between what you can do with a desk full of hardware at home vs a few racks of hardware in a datacenter
True, but this difference _should_ shrink with the hardware craze and we're able to buy memory (the biggest bottleneck at the moment) again, shouldn't it?
spockz 3 days ago [-]
There is also the thing of workflow.
We have set up something where you create a ticket, Make sure it contains enough information, and with the right tag added it will make a branch with PR for you which stays up to date based on updates to the ticket and comments on the PR.
It’s creepy in a way. But you also can’t really use local (as in workstation LLM) for that. Sure we could run something like a distributed task scheduler across all our engineer devices but just pushing it to copilot is easier.
mohamedkoubaa 3 days ago [-]
It the model is as good as composer, has a decent harness around it, and isn't incompetent at tool calls - it'll be useful at least as a sub agent for most workflows in perpituity.
rimliu 2 days ago [-]
Nothing will improve drastically anymore.
And when big ones run out of money to burn, who will train your local models?
xdertz 2 days ago [-]
AI usage is very spiky and good models require very expensive hardware. Running locally would just result in it sitting idle ~90% of the time. I think renting will always be cheaper, for comparable performance at least.
pessimizer 3 days ago [-]
> but a lot of people are going to multiply the per-month charge by 12 or 24 and say "Could I set up a local model for less than that, and have it pay for itself within a year or two?" And if a significant portion of customers decide to buy instead of rent, the companies whose business model is entirely centered around renting will suddenly find themselves hurting for customers.
And those are going to all be big enterprise companies that probably will set up LLM services entirely in-house, because they've got the headcount to utilize servers at 100%.
I wonder if there will be (or is currently) business in selling their compute while they're not working, to opposite time zones, etc.
What's left for the big providers will be the dregs of individual subscriptions and small businesses that at their least paranoid might let employees just use their own subscriptions for work.
spopejoy 2 days ago [-]
I know coding is the killer app thus far, but if businesses are seeing any kind of significant cost for other LLM usecases, seems like at least a decent consultancy opportunity to set up medium-sized businesses with in-house kit.
The other question is how the middle ground (hetzner etc) is shaping up, because obviously so many orgs won't want to run servers.
icoder 3 days ago [-]
What I don't understand is that on one hand we read 'what they charge is much less than it costs them' and on the other hand this thread seems to suggest that 'what they charge is more than it would cost me'.
bluGill 3 days ago [-]
What it costs is tricky to measure. A large part of the costs are training the model. Once they have the model they are making a ton of profit from what they charge (or so we think - I haven't seen the numbers). However the sunk costs of getting the model need to be paid for and that means an accounting problem where we have to guess how much the model will be used in the future.
Accountants are reasonably good at figuring this out - there are a lot of different things that need a large upfront investment before you can charge anything. People still debate if they are correct in this each case.
esailija 3 days ago [-]
Bigger models that Antrophic want to sell cost disproportionately more (e.g. 100% more cost for 5% performance improvement) than small models you would use locally
3 days ago [-]
15155 3 days ago [-]
They have to provide the service at peak scale and high-availability, your local setup doesn't have those extremely expensive requirements.
sbmthakur 3 days ago [-]
Someone was able to run gemma-4-26B-A4B on an i5-8500 with 32 gb ram with NO GPU. Granted this is an extreme example these MoE models are value for money for a lot of use cases.
Maybe that is why they are buying up as much hardware as they can? If their service is the only game in town.
otterdude 3 days ago [-]
Data Center providers are buying hardware, not anthropic. Certainly related but alot of the hardware purchased is just sitting in a warehouse waiting for a data center to get built.
frollogaston 3 days ago [-]
Anthropic isn't just renting out compute, they're renting out a closed model that's better than anything you can download for free. So they're rightfully focused on preventing others from distilling their model.
fmap 2 days ago [-]
It's in Anthropic's best interest to focus the conversation on "distillation".
Imo the more interesting thing to focus on is that there are now several more labs with the expertise and capabilities to train trillion parameter models. That's a serious technical accomplishment and the main reason why open models are catching up to Anthropic and OpenAI (and local models are typically distillations of much larger models).
Who cares that they got some small amount of training data out of Claude. The crux is that the big US labs are not special, they just have a first mover advantage that's slowly shrinking as incremental progress becomes harder.
mik09 2 days ago [-]
i think in the long term the problem is going to be this: a great small model always come from a greater large model, but the larger base model keep getting larger and more closed sourced
so long as there's no algorithm breakthrough
ActorNightly 3 days ago [-]
Local models will never achieve "real" performance (i.e actual usage, not benchmarks) compared to frontier models.
pornel 3 days ago [-]
[meta] I wonder why people have such wildly different bar for what is "good" agentic coding?
In a way, it's absolutely amazing that we've went from "Playing 'Set a Timer' on Apple Music" intelligence to something that may pass the Turing Test, but in practical terms the small models are still far from what I'd call "good" for more than a tech demo.
To me, 7B models are just a fuzzy echo of Wikipedia. Gemma models at 4 bit are too clumsy to even reliably generate JSON for tool calls or copy a line of code to apply a patch.
Qwen needs so much detail and babysitting to stop it from doom looping or losing the plot, that the instructions that I need to give are usually longer than the code I end up keeping.
Is there some magic prompt that I don't know? Do other people just have a lot more patience, or way lower expectations?
palisade 2 days ago [-]
Those who have never known anything better are okay with much less. For example, anyone who used Fable when it came out are saying that it is very difficult to go back to lesser models now. Even our strongest aren't good enough in comparison.
sadengineer22 2 days ago [-]
I used fable, and directly compared it against sonnet 4.8 and gpt 5.5 on various tasks. It was generally better, but still not perfect. Going back to sonnet/gpt has been perfectly fine.
papersail 3 days ago [-]
I had similar doubts. I think expectations differ because the workload differs. For small scripts, glue code, or simple CRUD changes, smaller models such as Qwen3.6-27B can work wonders than they do on a larger, messier code base.
verdverm 3 days ago [-]
There is a lower bar (that gets lower over time), but ime, the config you are describing is too low still.
qwen/gemma in the 27/35B range @fp8 are better than gemini-2.5, but less than gemini-3.1, you can run DS4-flash @fp8 on two DGX spark, and things keep becoming better. DiffusionGemma came out recently with 4x token gen speeds.
tl;dr - the models you appear to be trying with are too small or too quant'd
cheschire 3 days ago [-]
Haves and have nots.
We aren’t wealthy enough to have the hardware that would make this good.
The people who have the money to buy a spare maxed out Mac mini just don’t get it. I see lots of folks with RTX 6000’s in threads like these. Or any RTX card that ends in “90”.
Cloud AI is what allows the proles to participate in the broader AI conversation, but not these AI conversations.
monegator 2 days ago [-]
But cloud is what will enslave them to the corporation's will.
Google (of all companies!) demonstrated you can get useful stuff with reasonable performance with model running local on their smartphones.
Depending on your expecations you can get the local models running on a recent enough laptop, you just need 16GB of ram to be comfortable. It certainly exceeded my expectations (but i don't use the LLM to write code, only to do the real boring stuff: docs.)
embedding-shape 2 days ago [-]
As one of those folks with a 6000 Pro who tries out basically every local model I can get my hands on; local models still aren't ready to be relied on for larger-scale software engineering. They're quite capable when it comes to writing and editing code though.
towledev 2 days ago [-]
> may pass the Turing Test
Why do you say 'may'? Just curious. Surely you've got something
pornel 23 hours ago [-]
Because as with every AI, when it passed, the goalposts have been moved. Naysayers say it doesn't count, because winning once isn't enough, it needs to win 50%+ of the time, or winning against an uneducated human who can't ask right questions doesn't count etc.
claud_ia 2 days ago [-]
[flagged]
embedding-shape 3 days ago [-]
Show us the resulting code of using them! :) I want to use local models, I have the hardware for it, but while trying them out as replacements for GPT 5.5 xhigh or Opus or other SOTA models, they aren't quite ready to be replaced yet, sadly. The quality and bumps they encounter just slows down the workflow so much, even screwing up tool call syntax sometimes.
But, for smaller more well-defined workflows, or as straight "edit this part to be like this exact" edits, they seem more than enough. Still waiting for them to become mature enough to be able to replace what we have as SOTA today, I'd say it's ready to be switched over then.
Speaking of local models, DiffusionGemma (and diffusion models in general) should not be slept on for local usage! Usually the problem locally is that the LLMs aren't efficiently making use of your hardware, unless you start batching requests and run many at the same time, but that require different approaches in general. Instead, diffusion models work much faster for individual prompts, and not by a small margin either.
Today I finally finished porting diffusiongemma-26B-A4B-it support from Transformers into Candle, and together with some optimizations I now have it basically flying with ~450 tok/s (~19 it/s) in Candle during inference, instead of ~180 tok/s (~11 it/s) from HF's Transformers library. Even using vLLM with similar sized LLMs, I don't think I've ever gotten past the ~250 tok/s threshold for single prompts, exciting stuff for local models :)
zozbot234 3 days ago [-]
> Instead, diffusion models work much faster for individual prompts, and not by a small margin either.
Diffusion models can't really be trained beyond low-to-mid size and have lower quality than an equally sized, plain one-token-at-a-time model.
embedding-shape 3 days ago [-]
As mentioned, I've just finished the implementation and started playing around with it, seems to be doing similarly well inside of my own agent harness as similarly sized "traditional" LLMs. Of course, neither come close to SOTA models, but I suppose if we can figure out the scaling issues you mention, we'd get a bit closer. The performance just feels like it's too good to quickly ditch diffusion. Do you have more info what those "can't be trained beyond low/mid size" issues are in practice today?
zozbot234 3 days ago [-]
The issues around training diffusion models are well known among researchers. They're likely to not be feasibly scalable far beyond the 26B size of DiffusionGemma itself, and their lower quality compared to an equally-sized auto-regressive model (the usual one-token-at-a-time flow) is also a matter of broad consensus.
embedding-shape 3 days ago [-]
> They're likely to not be feasibly scalable far beyond the 26B size of DiffusionGemma itself
I think people used to say the same about the 8B text-diffusion models too when they came out, like LLaDA. LLaDA2.0 seemingly claims 100B total / 6.1B active MoE diffusion (DiffusionGemma is also MoE). Not saying you're wrong about the current consensus, but it has a way of changing over time, might be a bit early to claim it's infeasible to scale them, especially considering the final artifact being much more suitable for local usage.
famouswaffles 3 days ago [-]
Difficulty of scaling is not the only issue. Nobody is going to be particularly invested in scaling an architecture that has:
- consistently proven behind their auto-regressive counterparts in quality. Look at the dgemma benchmarks - pretty steep dropoffs and the more difficult the benchmark the worse the dropoff. That's not a good look and it's not like its some artifact of google's release. Every dllm is like this.
- And whose inference benefits are negated at scale. Transformers are still cheaper if you want to serve lots of users.
>"DiffusionGemma's speedup is designed for local and low-concurrency inference. In high-QPS cloud serving, autoregressive models can be deployed to saturate compute efficiently, so DiffusionGemma's parallel decoding offers diminishing returns and can result in higher serving costs"
Put yourself in the shoes of all the labs, even open source ones. Why would you put much effort into this ?
embedding-shape 3 days ago [-]
> - And whose inference benefits are negated at scale. Transformers are still cheaper if you want to serve lots of users.
But my entire point is about the reverse of this, the context of what I bring up is in single-user scenarios, which is where these diffusion models really make a large difference in performance.
Sure, I agree it's not a good fit for every single use case out there, everywhere. But after starting to play around with it closer myself, I think people are dismissing it a bit too quickly, at least if you're interested in running local models on your own hardware.
famouswaffles 3 days ago [-]
I don't think you're really getting the point I'm trying to make. Everyone training llms regularly cares about serving users at scale and quality per compute invested. It's not just about OpenAI or Anthropic or Google. Qwen, Deepseek, Moonshot, whatever. They all care about it very much and basically can't afford to take a step back in those areas.
Since training models is currently a very expensive procedure, diffusion llms are destined to be relegated to the occasional research artifact at best. As things stand, making a serious commitment to them is basically the equivalent of throwing money into a fire pit and things are expensive enough as is.
Alternate Architectures that do a much better job matching transformers in quality have basically gone nowhere but you expect one that is basically worse in every way the labs care about won't ? I'm not trying to 'dismiss' dllms. I'm interested in them for the same reason you are. I'm just stating the factors at play plainly.
zozbot234 3 days ago [-]
Single user scenarios can also use MTP to make auto-regressive inference more compute-intensive with no loss of quality.
an0malous 2 days ago [-]
No one ever shows the resulting code of using frontier models either. Curious.
angry_octet 3 days ago [-]
Programmers are used to paying nothing for tools. A basic laptop (SSD, multi core, 16GB of RAM) is hugely powerful if you are building in C/C++/Rust, even python. But all of a sudden it's no good, and we're back to using someone else's computer, hiring our tools every day. Worse, we get a different model every day, and maybe we aren't allowed to borrow the good tools some days because some mafioso are shaking down the manufacturer.
Most other trades need to invest significantly in tools. If you want good tooling, you really want 64GB of GPU memory (e.g. 2x 5090) and 96GB of RAM. If I'm paying $200k for an expert engineer then $50k every other year for tooling seems pretty reasonable.
rsanek 3 days ago [-]
Who's paying the $50k? I don't see how it makes sense to pay that much for a home-grown setup when I could pay <$5k/year total for both of the two best frontier models at effectively unlimited usage.
fragmede 3 days ago [-]
> best frontier models at effectively unlimited usage.
It would've been easy to spend $5k on Fable in the short week it was available. If that's the direction things are going (we can assume GPT-6 to be if similar class) $5k's not going to get you "best frontier models at effectively unlimited usage".
angry_octet 2 days ago [-]
I know some orgs that are already spending more on tokens than developer salary. That's what unlimited use leads to. Teams of agents running on expensive models, agents designing and running test suites with barely any oversight.
angry_octet 2 days ago [-]
This is for clients paying millions for deliverables, with high stakes deadlines. Expertise in the domain is in short supply. Data and model control is very important, so relying on AIaaS was already risky. You can LLM enable engineers without big AIaaS risks.
A 16C Ryzen 128GB with 96GB Blackwell is ~US$16k, quite reasonable for a worker billed at $300k. In fact so reasonable it's worth having AI enabled backend for lots of things.
Epicism 2 days ago [-]
$5k? I work at a software company where one engineer has used that every month minimum.
iagooar 3 days ago [-]
I love running two models locally: qwen3.6 27B 8bit (dense) and qwen3.6 35B 4bit (MoE).
The 27B is the smarter, more reliable one - but it is slower.
The 35B is faster, still very smart but below 27B, a bit less reliable. The reason is the MoE - Mixture of Experts architecture, which only activates a subset of parameters, making the model much much faster.
I run the 27B on a MacBook Pro M5 Max + 40 GPU cores + 128GB RAM (well, on this beast I can have 27B + 35B in memory at the same time with headroom for all the other stuff). But because this is a laptop, it is not possible to run local LLMs all the time - it just gets too hot and too loud.
What excites me more: I run the 35B model on a MacMini M4 with 64GB RAM. It is fast, it gets a lot of work done (e.g. it scans, extracts and classifies my emails, it watches the mailbox all the time and does work). I also use it as my private Hermes assistant ("when is the next Starship launch?", "who is playing today at the World Cup? Give me some trivia").
Next step I am planning is a RTX Pro 6000 Blackwell workstation I can put in my basement. I want to run qwen really fast, with multiple threads / prompts / agents at once. And MAYBE if the budget allows, a 2x RTX Pro 6000 setup in order to run DeepSeek v4 flash on it (to run research on it).
Barbing 3 days ago [-]
Did you get a Brave search API key or something for that “Hermes”?
verdverm 3 days ago [-]
I'm using SearXNG, EXA, Tavily, and soon (tm) Cloudflare
They all give slightly different results, you can dedup / fusion with heuristics / another agent
nickthegreek 3 days ago [-]
I have my mine setup with a searxng instance I run in a docker. Works great and costs zero.
dghlsakjg 3 days ago [-]
Hermes is just an agent that can be setup for whatever you want (coding or more commonly personal assistant ala clawdbot). You can set it up with any of the standard tools and MCPs like brave or tavily for search.
iagooar 3 days ago [-]
Yes, Brave search is one of these services I highly recommend paying for, the search they provide (similar to Exa, Tavily) is what makes an "OK LLM" become super smart.
zerd 3 days ago [-]
I'd love an RTX 6000 Pro, but how can you justify it when it costs 10 years worth of Claude Max?
iagooar 3 days ago [-]
10 years worth of Claude Max today. Also - Anthropic recently removed a model I relied on and isn't giving it back. As a non-US citizen, I would rather pay in advance but be sure, I will keep having access to inference on my own terms.
Also, it will just be faster - and more fun too.
girvo 3 days ago [-]
Because they're fun to play with :)
But also because it's likely to hold most of its value into the next few years, based on the looks of things, too
jnaina 2 days ago [-]
how are you connecting the 35B model to your mailbox, for email classification?
iagooar 1 days ago [-]
It is a combination of Hermes agent as the orchestrator and a custom extractor script (that uses qwen or any other LLM) that runs every 2 mins (on Mac via launchd). I had the code + skill written by Hermes.
The beauty of it is that Hermes itself has a cron too - every 4h Hermes will wake up and check if the email ingestion is working fine. If not, it will fix it. Funnily this is one of the most robust setups I've seen in a while, it is like having your own little DevOps waking up at night, fixing the infra when needed.
jnaina 13 hours ago [-]
I did something similiar on OpenClaw running on a Mac Mini. The script uses Applescript to check Apple Mail for new emails and summarize them, and also add the summary to Sqlite. Not quite smart yet to uncover and track large mail threads, with context.
sosodev 3 days ago [-]
I think this is overselling their capabilities. I've used Gemma 4 and Qwen 3.6 quite a bit on my strix halo home server. They're great models and the dense variants are significantly better, but they're still very far behind the frontier. If you boot up Gemma 4 MoE and OpenCode/Pi and expect to perform anything like Claude Code or Codex you're going to be very disappointed.
kristopolous 3 days ago [-]
You need to switch out the prompts and work with it differently.
And modify the "tricks" until my evals get to good numbers. It's a model by model basis.
This is what the larger firms are doing - they have custom prompts per model
sosodev 2 days ago [-]
Petsitter's default tricks doesn't seem to do much for Qwen3.6, right? JSON mode could be useful I suppose, but that's not really going to make it better at writing code. Do you have any other example tricks? I'm having a hard time understanding how I would apply them.
kristopolous 2 days ago [-]
thanks for the feedback ... i'll work on publishing them.
I haven't include more sophisticated ones because they are complicated and I wanted to avoid the friction
dejawu 3 days ago [-]
If vibe-coding is hopping into a self-driving car and telling it to take you anywhere you can get a coffee, then I use coding agents more like a bicycle - they let me get further faster than if I'd walked, but I still have to decide where to go and how to get there, and I still have to pedal.
I don't vibe-code, but I do decide what to implement and what patterns to use (perhaps asking the model to analyze and give advice on this first), then I have it handle the nitty-gritty of the implementation itself. For this usage style, the latest local models are as good as having Claude at home.
I won't say it's been _easy_ (I ended up implementing my own harness to accommodate the idiosyncrasies of local models), but I will say that for the effort, having a coding agent that's essentially free to query as much as I want has been life-changing as a dev, especially when it comes to working on side projects. Knowing that my agent will never get worse in quality, suddenly cost more than it does now, or be suddenly made unavailable by external factors, was absolutely worth the trouble. And on top of all that, I can't believe it's as good as it is.
xienze 3 days ago [-]
The big caveat here is that these local models require you to invest some time tweaking your harness, AGENTS.md, and skills in order to get things roughly to the level you'd expect. But something like Qwen3.6-27B with web search capabilities and a good set of skills really is impressive! Especially considering that you can go wild and not worry about token costs.
The other thing that people tend to gloss over is that you really do need to spend some $$$ on decent hardware. Yeah, you CAN run some 4-bit quant with heavily quantized cache on your 16GB card, but it's not going to be a great experience (I think this is where a lot of the "if you think it's gonna be any good, you're going to be disappointed" stuff comes from). Yes it's a lot of $$$ upfront but it's very much unknown when hardware prices are going to come back to reality. There's a lot of hopes and dreams that any minute now an H100 will be worth pennies because "that's how it's always been" w.r.t. computer hardware, but we are living in interesting times. So you can't just make the tired old assumptions that a Claude subscription over three years time will work out to be dramatically less than the value of some card three years from now. We STILL have basically anything with >=24GB VRAM appreciating in value, which is absolutely wild. What I'm saying is, the depreciation curve may very well be a lot less dramatic and fast than it used to be, going forward.
chrismarlow9 3 days ago [-]
You can use a frontier model to create a plan that's specific enough for a local model of a very small size to execute on. The more specific you are and compartmentalize tasks the "dumber" the local model can be.
Edit:
Obviously you'll be using more tokens but this is the trade off for running a smaller model and running locally. Similar to time memory trade off but in token economics. Sorry I need more coffee
0xc0c0c0 3 days ago [-]
I have used local models (around 128 gb) and the big proprietary models, and while I do want local models to win, it's important we keep the expectations of local models realistic. There are many blog posts about how local models today can fully replace some of the proprietary models and in some cases its true for the much smaller proprietary models, its very clearly much more behind the larger models.
You can be far more ambiguous with your tasks with the larger proprietary models as opposed to the local models. You can achieve the similar results with local models but you need to be much more detailed in your prompt.
One of the biggest things about running these local models is that the harness matters almost just as much as the model too. Codex is optimized for GPT models, CC is optimized for Claude, Cursor has a great harness that works very well across these providers. It took me a couple of iterations of the different harnesses to find one that would work well with the smaller Qwen models to do local coding.
failbuffer 3 days ago [-]
So which harness did you end up choosing?
segmondy 3 days ago [-]
It's more than good. As of today, it's great. Those models listed in the blog are horrible compared to what you can run today, There's absolutely no reason to run those, you have Qwen3.6, Gemma4, and plenty other sized comparable models.
If you're resourceful, you can even run SOTA models. KimiK2.7, MiMo-V2.5/V2.5-Pro, MiniMax2.5/2.7/3, DeepSeekV3.1/v3.2/V4-Flash/V4Pro, GLM5.1, Step3.7-Flash, Qwen3.5-397B, Qwen3.5-122B, gpt-oss-120B
agile-gift0262 2 days ago [-]
> Qwen3.5-122B
do you find Qwen3.5-122B to be SOTA-level? I moved from it to Qwen3.6-27B (both Q8), and I prefer 3.6-27B, and it leaves me room to spare for other small models
delis-thumbs-7e 3 days ago [-]
Nobody asked, but I don’t think any of us should be using SoA models to code or to do pretty much anything at all. Instead we should develop open models to work on specific tasks and learn to code, write, draw etc. using fingers made of bones and brains made of flesh. Big corporations and research facilities can run them to generate code or math or whatever, with a bunch of specialists to check the output to be correct. Then again, even that might not be worth the costs (e.g. OpenAI’s 36B$ net loss last year), when the open models are so close and the whole AI scheme is running out of scams to pull.
There’s a lot of things we could use even quite small models for, which would not need an insane amount of computing power and memory, but too few of us is really researching them.
schmuhblaster 3 days ago [-]
I’ve been playing around with qwen3.6-35b-a3b and managed to boost it significantly by leveraging my own custom harness [0].
It is quite astonishing to see how far local models have progressed, and I think that if you enjoy tinkering a bit, you can save a good bit of money (if you happen to have the hardware lying around anyways). Overall it’s still hard to beat the the cost/convenience combination of a cloud based model provider though.
Cool, so the determinstic harness can boost the agent pretty much!
edg5000 2 days ago [-]
Harness engineering is very interesting stuff. Thanks for sharing.
ngxson 3 days ago [-]
My 2c: I think the "cloud vs local" debate is (maybe) a false dichotomy. In my experience, I use a hybrid approach and I've seen a huge productivity boost from it.
The cloud-based models are fine for big and complex tasks, but the pricing is ridiculous for small stuff—like summarizing a discussion or fixing a small bug. And cloud and privacy have never been a good match.
As an example, this comment itself was written with the help of Qwen3.5-4B running locally with an extension on top of llama.cpp default web UI [1]. The extension injects my browser's context directly into the conversation, which allows me to summarize things and draft up comments quickly. Speed is pretty acceptable for the size: ~5s TTFT and ~100 t/s generation, all running on a Macbook M5.
And when I want to run bigger tasks, I don't just stick to one provider. Apart from well-known closed-weight providers like OpenAI or Anthropic, I also experiment with open-weight models like GLM-5.1, DeepSeek V4, and Qwen3.6-27B, which provide quite good results for the price.
I'd argue both have value, and I don't see why anyone needs to choose one exclusively. Anyone else doing this?
Why not just use DS V4 Flash for the small stuff? Very fast and extremely cheap.
ngxson 3 days ago [-]
The dsv4 flash is 158B params in total. It is possible to run locally but will require all my system RAM.
Also, a lot of my day-to-day tasks perform the same on both small and bigger models: summarize a web page, draft a response, translations, quick web search, etc.
phainopepla2 3 days ago [-]
Sorry, I meant non-locally.
I'm assuming privacy is not a concern since you mentioned using Deepseek already. The cost of V4 Flash for small tasks is so minuscule as to be almost free, and you don't have to deal with a churning laptop (or even buying a high-end laptop, for someone who doesn't already have one).
I guess what I'm really asking is, what's the advantage of using these small local models if privacy isn't a concern?
ngxson 3 days ago [-]
I do use both DSv4 the "normal" and the flash variant, non-locally. It works well, not exceptionally. And while it's cheap, I'd say that the difference between $1 per month vs $5 per month is not a big concern to me. IMO pricing is pretty competitive among open-weight models: https://huggingface.co/inference/models
Depending on use cases, but for me I found 2 use cases where a local model is a must and not optional:
- Running offline without internet access: for example, I have this project that allow transcribe and summarize audio in real time. I already used it in some events where wifi is not available: https://github.com/ngxson/llama.cpp-realtime-audio-recap
- Handle private personal data, for example health records. This is the same category of "privacy" that you mentioned, but I just want to bring up the fact that people value their privacy differently.
coder543 3 days ago [-]
dsv4 flash has 284 billion parameters, not 158 billion.
Huggingface's little parameter count badge seems unreliable.
3 days ago [-]
Tharre 3 days ago [-]
I've been running Qwen3.6-35B-A3B (and 3.5 previously) locally and it's a great model for many small tasks, probably a significant chunk of what most normal people are using LLMs for right now.
But for coding in a harness? In my experience it's unusable even for small projects. It just gets hard stuck at every little problem, wasting hundreds of thousands of tokens trying to make a convoluted solution work instead of doing the obvious thing. Or it will spend hours trying to reason through a fairly simple code flow, incrementally adding debug print statements, only to get confused by the output and then editing completely unrelated code that it convinced itself is the problem.
I've tried instead giving Sonnet the problem description and code and have it come up with a detailed plan that Qwen should implement, but doing that actually consumes a significant amount of tokens compared to just telling it to implement everything, and the results are honestly not that much better. There are just too often subtle issues with the plan that Qwen doesn't recognize when implementing, but make the resulting solution it comes up with unusable.
_doctor_love 3 days ago [-]
"Just get a 64GB Mac with 1TB of storage!"
LOL - some of us have a budget
swatcoder 3 days ago [-]
Sure, but it's also not really out of scale with the cost of a shop tool in other trades.
If you're a professional that's confident in a positive return on the investment (optimal or not), or just a hobbyist with the luxury budget for a "shop" that cost is well within norms.
That's not everybody, of course, but it's not some inconceivable fantasy. A lot of people in the tech community here on HN, specifically, end up with pretty high discretionary budgets that they pour into stuff like this.
frollogaston 3 days ago [-]
But you can get that return from a paid service too, in fact it'll be better. So just comparing costs, what's the annualized ROI on the Mac Studio assuming it means you avoid paying $240/y for Claude? Cause I can always set aside the Mac's price in some investments and pay for Claude out of that.
swatcoder 3 days ago [-]
Same with many and their shop tools in other trades.
Most hobbyists and many professionals could end up far ahead financially by leveraging makerspaces, tool rentals, and co-op shops or even by hiring out a professional to prep certain intermediates for them, but they get psychological value -- as well as flexibility, reliability, and resale opportunity -- from having their own well-outfitted shop.
And they can afford that premium, so they do. At the scale of individuals and small shops, not everything that matters gets captured in financial models.
frollogaston 3 days ago [-]
Yeah but the local model doesn't have those advantages for the coding use cases, at least not yet. In theory you could post-train one on your codebase or something, but nobody cares to do that when any vanilla coding agent service can read and understand the whole thing better than a locally tuned free model. I was already being very generous towards the Mac in pretending it does the same thing as the paid service.
Aside, physical tools tend to be financially advantageous to own if you're going to use them a lot. Even if the owner were targeting 0 profit, they'd have to charge more to factor in the cost of dealing with customers and increased risk of wear/damage by users who don't care as much.
swatcoder 3 days ago [-]
The shifting sands of commercial models or pay-per-use managed models are just really not appealing to a lot of people.
Most come with huge privacy concerns, total costs and availability are impossible to forecast very far out, and the specific behavior of frontier models in particular is not something anybody can rely on as those are subscription products that are subject behavior on their publisher's whims (whether from changing system prompts, new "safeguards", retired models, forced "updates", new regulations, etc).
It's quite hard to put a price on all that, and as more people find local models productive enough or develop curiosity to explore models, training, or harness-crafting in their own ways, the marginal cost of buying some shop hardware just sort of disappears into the budget noise for plenty enough people.
Gigachad 3 days ago [-]
Hosted is still much cheaper and you get a better model. Some day I imagine the gap will close but it hasn't yet.
amalcon 3 days ago [-]
A Strix Halo with similar RAM is considerably cheaper. Still not cheap, mind, but performance is OK (not great) and it will run more or less the same models.
AbsurdCensor 3 days ago [-]
At least for me, it's been pretty great, but I bought my system when it was $1800, now looks like the same system is $2700 and out of stock. I still haven't quite been able to run 120B parameter models under Windows, but for Qwen Coder 30B, it works pretty darn well for my at home needs.
amalcon 3 days ago [-]
Yeah, they have gone up a lot since I bought mine too. I did get Qwen3.5-122b running on all-GPU (on a 128GB machine) under a minimal Arch Linux setup (I do my GUI work on a much cheaper box). It worked, but Qwen3.6-35b is performing almost as well and a lot faster.
Still cheaper than a new Mac. Maybe not cheaper than a used one.
AbsurdCensor 3 days ago [-]
I've certainly thought about just moving the box to Linux, but it took far to long personally to get everything running under AMD and it works 'well enough' that I don't want to make the switch. I tried playing with GAIA on it, felt a bit limited, and now have Hermes up and running, and that seems to work quite well. All the tools are changing so quickly, it's sometimes difficult to settle in on 'what's best', so I certainly can understand folks that just want to pay for a AI subscription and be done with it.
p-e-w 3 days ago [-]
No need. You can run the Gemma 4 and Qwen3.5 MoE models with as little as 12 GB of VRAM at 30-40 tps (Q4/Q5), and they both blow GPT-4o and DeepSeek R1 out of the water.
anarticle 3 days ago [-]
Pros buy their own tools. This is why working for yourself is better than working for a corpo, you get to choose your weapon.
_doctor_love 10 hours ago [-]
That's daft mate
techscruggs 3 days ago [-]
He is using a 2022 M2, which you can get that for about $2k used. That is beyond reasonable.
psychoslave 3 days ago [-]
Global Affordability Estimate:
Top 10% of global earners (~800M people) can afford a $2,000 device without major financial strain.
Top 25% (~2B people) could afford it with some budget adjustments.
Bottom 50% (~4B people) would find it prohibitively expensive.
So for a SV top income, maybe that might look more like the weekly pet brushing budget, but for most people out there this is not that much of a no-brainer.
disgruntledphd2 3 days ago [-]
The maths changes if you're working for yourself. Because I live in Europe, I've ended up working as a contractor due to the lack of a legal entity in my country. While that mostly sucked for a bunch of reasons, I was able to get a 64Gb Mac M2 a few years back with approximately a 52% discount, which was kinda nice.
weego 3 days ago [-]
If you're working for yourself paying monthly is exactly the same as amortising an asset. Personally I'd rather my business just pay $100 a month than have to deal with additional hardware and software maintenance while using a depreciating asset that is break-even after 3-5 years depending on the spec.
3 days ago [-]
frollogaston 3 days ago [-]
Bottom 50% aren't paying for Claude either, probably also don't own PCs or write code
richwater 3 days ago [-]
Yes, because the bottom 50%, mostly impoverished or near impoverished folks were spending money on Claude Code subscriptions instead /s
Shekelphile 3 days ago [-]
She
tjwebbnorfolk 3 days ago [-]
AI and budgets don't mix well at the moment
themythfable 3 days ago [-]
Yeah, I never had a computer that cost north of $800 until recently. While that is far from the typical HN user's budget, my bet is that it is much closer to average.
Besides those with effectively unlimited budgets for their personal compute, local models are still a long ways off.
Though, that shouldn't be conflated with the value of open-source models, which can be used by cloud providers to significantly reduce cost of intelligence.
embedding-shape 3 days ago [-]
> Yeah, I never had a computer that cost north of $800 until recently. While that is far from the typical HN user's budget, my bet is that it is much closer to average.
There are segments, everything from "Average person in world" to "Average creative professional using computers for work" and more on HN, with a wide range of costs for the hardware. HN probably skews towards the latter rather than the former, probably sitting with enterprise hardware next to them basically for fun, hard to make wider conclusions from what people here have or not.
sublinear 3 days ago [-]
If we define "typical" as the median HN budget, it's probably about the same as yours. Maybe the answer would have been different 10 or 20 years ago, but the era of truly needing a big budget PC has been over for a while.
It's just for gaming and AI now. Maybe not even gaming as much anymore.
Consider the perspective of someone who has a practically unlimited budget for PCs, doesn't game much anymore, and doesn't need AI to do their job. It's just part of getting older, and there are plenty of people in their late 30s and older on here.
dofm 3 days ago [-]
[dead]
bayshark 3 days ago [-]
Hey everyone, made a local LLM, configured for Home Assistant called Selora AI.
The full base model and LoRA adapters are only 3.5GB
Capabilities include configuring for smart home setup to help with answers, clarifications, commands, and creating automations in Home Assistant. The models with the LoRA adapters were made with lean scripted data made specifically for Home Assistant. A lot of work was put into this, feel free to give it a try and happy for any feedback!
I think gemma-4-26b-a4b and Qwen3.6-35B-A3B show that there's something very interesting about a local model that does mixture-of-experts (which helps a lot with performance) and has in the order of 30 billion parameters.
These models are very capable, and use around 20-30GB of RAM while they are running.
Provided you have 64GB of RAM that leaves space for running other applications at the same time.
chrisweekly 3 days ago [-]
Obtaining that 64GB RAM is a meaningful obstacle for many.
simonw 3 days ago [-]
I'm still amazed that you can run LLMs of this quality on a machine that costs less than $3,000.
I used to assume that anything GPT-4 equivalent or higher would need $30,000+ of server-class hardware.
Second this notion. After picking up an OEM Spark and running qwen36moe/dense, I was thoroughly impressed with what such small models can do and the (reasonable) speeds you can get. I'm back to using open weight models via an API (wanted more capability for the time being), but will be getting more hardware soon (re: ds4-flash and the fable shot heard round the world)
frollogaston 3 days ago [-]
Not just RAM, VRAM, right? Though they're one and the same on the Mac.
anubhav200 3 days ago [-]
I have been using qwen and glm based models from last 2 years, ended up buying mutiple machines for the same. Overall i feel 24vram is a must have to get get performance (speed wise) to match hosted soln. I have 2 machines a 12gb vram one and a 24gb one. On 12gb vram i get around 50tps generation and 500tps prompt processing and on 24gb one i get 180tps generation and 3500tps prompt processing. I have different configs for different scenarios and I also use llama cpp manager manage all my configs (https://github.com/anubhavgupta/llama-cpp-manager)
ptx 3 days ago [-]
> Security: I run every Pi session in a Docker container and give it permissions only to bash so that it can’t run Python code or do web browsing
How does that work? The script in the post references the file "docker-compose.sandbox.yml", but I don't anything about what that file does.
The post that this one links to, that it's based on, says that Pi doesn't do proper sandboxing.
Presumably bash can still execute other binaries, otherwise it would be fairly useless. What stops it from executing Python? Or opening a network connection and downloading Python?
minton 3 days ago [-]
I’m glad people are looking into this because I do think it’s the future. However, why would you not take advantage of the heavily subsidized frontier models while you can. It’s obvious that they’re gonna have to raise prices at which point it might make sense to consider local models, but not today.
fendy3002 3 days ago [-]
Curiosity or anticipation I think. I have tried it in the name of those 2 factors, because when the frontier model price increase happens and we don't know anything about local models, we're screwed
androiddrew 3 days ago [-]
$2600 will buy you two AMD 9700 gpus with 32Gb ram per card running about 285 Watts per card. Less than a 5090 in both cost and power. A VLLM build patched for AITER and you can run Qwen3.6 27B FP8 at roughly 45-50TPS during real coding sessions with Opencode or PI with a full context window. I really hope more 30B dense models continue to be released, but Qwen3.6 should get you a lot of agentic mileage.
ROCm stack is not for people though who aren’t willing to dig in and patch things themselves.
K0IN 3 days ago [-]
In a day to day base i host Qwen3.6:27b, but i *Really* want to host deepseekv4 flash, its such a "good" model for its size/speed/price.
I really wonder when companies will start hosting theire model for everday tasks on prem, cause its good enough (and realative cheap), instead of paying subscriptions for all devs.
richbradshaw 3 days ago [-]
I’m keen to understand speed here etc etc. if I bought a Mac studio with 96GB - what can I realistically run, how’s it compare to fable/opus etc and how fast is it?
Currently maxing out two Claude code accounts every x hours when working on large code migrations or setting up new iOS apps etc - most of time it’s fine but occasionally it’s mega frustrating!
simonw 3 days ago [-]
I strongly recommend trying LM Studio - it's the lowest friction way to try out models, you can browse https://lmstudio.ai/models and click "Get" and then "Run in LM Studio" to download and run a model.
With 96GB I'd start with the Gemma 4 and Qwen 3.6 models. Any of those should work fine.
AbsurdCensor 3 days ago [-]
I think currently you can only get the M3 Ultra Studio with 96gb, and for coding tasks, say you rub Qwen Coder on it (which doesn't need that much ram), it's not the fastest, something like 30-40 tok/sec. Probably better with a MacBook Pro with the M5 chip. There is a website for comparing different configurations and models: https://llmcheck.net/benchmarks
pizza234 3 days ago [-]
[dead]
gregwebs 3 days ago [-]
All these conversations seem like they are missing talking about planning vs execution. I want the best possible frontier model to plan out my changes. I also have a 2nd agent that is a frontier model check the plan. Then at that point the implementation can be done by a lesser and possibly local model. The frontier model can still do a final code review on the implementation of the changes.
Claude code supports this by setting the model to "opusplan"- it will automatically use Opus for planning and sonnet for implementation. This was completely necessary with the fable release. I was able to do this with fable and it was necessary to avoid getting quickly rate limited. In settings.json:
I do this with Codex 5.5 for planning (specs, technical design, and task list); and Qwen 3.5-35B for task by task build out. It requires more hand holding and makes more mistakes than using Codex for everything, but it helps me spread my $20 chatGPT subscription pretty far.
sieste 2 days ago [-]
The "middle powers" (cf Carney) should invest in local models, rather than relying on US and China allowing them to rent their AI models. It takes a single executive order to cut the rest of the world off of American AI tools. "I'm happy to pay whatever to rent frontier models from hyperscalers" makes sense if you're citizen of a superpower, but it's risky, naive, bordering on irresponsible to adopt this mindset otherwise, especially when your business or career depend on the tool.
k__ 2 days ago [-]
Training DeepSeek was magnitudes cheaper than training the SOTA models it relied upon.
In theory, other countries should be able to replicate that effort and improve it.
sieste 2 days ago [-]
I'd love for European countries to embrace their priorities around people and environment and train a model on public domain data that can run efficiently on cheap hardware. Redefine benchmarks around these ideals and optimise towards them, rather than trying to enter a race that you can't possibly win and didn't want to run in the first place.
The most "affordable" option is red v2 with 64GB GPU ram and costs $12,000. This is only ("only") 1.5x-3x the price of a beefy desktop (https://pcpartpicker.com/builds/), and could crush inference work even on bigger models. It could support coding tasks for a small team of developers, or run an AI agent for every person in your household...
pornel 3 days ago [-]
64GB VRAM is too little to run good coding models IMHO. May be useful if you need voice models or run some slightly-smarter-regex batch processing or RAG workflows. Perhaps you're supposed to buy 4 or 8 of these and split inference across them.
If you have $12K to spend, you may be better off with DGX Spark or a Mac with 128GB VRAM. That can (barely) fit DeepSeek V4 Flash.
asim 2 days ago [-]
I don't run local models, my devices are 5-6 years old and not powerful enough. It's a bit counter intuitive and different to what a lot of engineers are doing but I don't have a mac mini, I don't have a powerful laptop, a lot of my dev work has always been cloud based, on github, on a VM, I'm mostly using SSH from my laptop and now Claude Code on my phone (exe.dev is hands down the best experience I had on this front when the agent is literally on the VM).
In an ideal world, yea you can run local models, but I need a powerful always on device for that, or the latest gear, and it will never be as fast as what I can use from google, anthropic, or through an API call. I really wish it was different but I have to shell out a ton of money for that, and I guess it's usecase specific right. Maybe if my phone was super powerful and could run models that would be great, but then I have this issue with cloud sync and using things anywhere else. There will be a world in which local models and self deployed models make sense, this is going to be a core experience, but I personally can't run them.
valisvalis 3 days ago [-]
There are good use cases for them for sure, the Gemma 4 Good hackathon a while ago showed how local models can solve problems in health and education in areas with low connectivity or small infrastructure.
LolWolf 3 days ago [-]
what were your favorite projects?
ltononro 3 days ago [-]
Good depends a lot.
If you are in the token maxxing hype you will probably find these models very bad comparing to SOTA, unfortunately.
The good news might be: opensource models are now good (enough) for day2day usage. But is it really? I feel that companies will always naturally strive for the best and use the SOTA (as long it is not too expensive).
I see OSS models being a good backbone for companies in the future that have validated workflows and could use those for privacy or to spare costs.
IDK, might have gone a little bit off-topic here.
polotics 3 days ago [-]
So I've made this [me+vibe+tests]-coded Android alarm app called Promptly, and as Gemini-CLI on the Google Pro subscription is getting google-killed on June 18th, I set up two branches, one for Antigravity+Gemini3.5 and one for Pi-coding-agent with Qwen3-Coder-Next...
Running the same prompt on both with the same .md memory state...
Gemini3.5 is more "intelligent" but Antigravity gets it to decide to go on tangents that are quite time and token-consuming I think. Nice casino machine.
Pi+Qwen3 (~80GB, llama.cpp) is like vibecoding about 1.5 years ago, when you had to babysit, structure your program to have self-contained chunks, and keep an eye on all the cross-cutting concerns to not trip it up. When it works it works fine and when it fails it's my job to ensure it fails fast.
The code is about 10'000 lines of Kotlin in total so it already takes some effort to keep it simple for the AI. It's not a slopped quantity of code, i got solid feature creep :^)
It's not "good". A more accurate description would be "sometimes useful and not far from being good". The author is using pretty small models. There have been a lot of improvements that scale in any case (eg MTP) but ultimately this is still hardware limited by 3 factors:
1. Memory bandwidth
2. VRAM size, which limits the size of a model you can use effectively. Yes you can swap but then you're taking a performance hit;
3. Raw FLOPS, including quantization.
Apple here is interesting because they have a shared memory model and you can buy Macs currently with up to 128GB of RAM (previously 256/612GB on Mac Studios, both discontinued). New M5 Mac Studios are expected in Q3 but that's not guaranteed. It may take until next year
Depending on the chip, Macs top out at ~900GB/s. A 5090 or 6000 Pro has 1800GB/s. A B100 is at like 3.2TB/s. A 5090 has, depending on how you count, 5-7x the FLOPS of a M5 Pro so a 5090 is still better than any current Max... except for the 32GB limit.
NVidia aggressively segment the market by limiting VRAM. The RTX 6000 Pro is basically a 5090 with slightly more CUDA cores and 96GB of VRAM instead of 32GB for $10-11k instead of $3k.
So let's project this into the future a little. The M6 Ultra/Max may well be 1TB+/s memory bandwidth with much higher FLOPS and thus actually be competitive for larger models. A 6090 in the current market will probably still have 32GB of VRAM if I had to guess. Maybe it goes up to 48GB.
But anyway I think we're only 2-3 years away from sub-$5000 hardware that does 100-300+tok/s on models larger than 31B. And that's going to be a game changer.
nullc 2 days ago [-]
I'm a little mystified at people taking about qwen 3.6 27b/ gemma 31b being slow in one breath and then saying they're using a 16GB gpu in the next.
You do need to use sutable hardware.
I get 50tok/s from Qwen 3.6 27b with Q8 & MTP (I can get more aggregate tok/s in parallel rather than using MOE, but don't have enough memory for too many full sized contexts) and 100 tok/s with 35B-A3b Q8 (no MTP as it's not that useful with MOE) on a single workstation gpu that I spent 3k on a couple years ago.
These speeds are somewhat faster than what I've seen from commercial SOTA models, they're plenty fast for many applications.
linuxhansl 3 days ago [-]
I soooo wish that to be true. Alas, in my experience it is not... Yet.
What is true is that it gets easier and faster to run local models.
With QAT (quantization aware training), turboquant (or similar) K/V compression; what used to be impossible to run is now fairly easy.
I can run gemma4:26b-a4b-qat on my laptop with 20-30 tokens/s with a 256k context window. That was unthinkable just 6 months ago.
So the local models are "OK" for small'ish projects.
But it does not at all(!) compare to the frontier models. For a large project Claude's Opus 4.6+ just work, whereas local gemma tangles itself up, makes weird mistakes, and just can't handle it (for those cases it is faster if I do it myself).
If the trends continues, with 1.58bit QAT models, even better K/V compression, faster multi-token prediction et al, maybe soon it will be comparable.
wxw 3 days ago [-]
> “if we are constrained by performance and price, what architectural tradeoffs do we need to make?” a question that so far has not really been asked in the mad token gold rush.
To be fair, I think the labs are also interested in this (e.g OpenAI parameter golf). But the incentives are tricky. When the subsidies and tokenmaxxing era ends, local models will be essential.
It really is better than I would expect it to be. But it requires a special treatment. Since the model is smaller it needs a smaller and simpler tasks. I use smarter model to decompose the task into primitive subtasks, write good description, submit to worker with qwen3.6, review completion and create new task to fix if required (20% of cases). This workflow works fine.
aquarious_ 3 days ago [-]
I support local models and enjoy playing around with them, but even for personally development it is just more viable for me to pay $200 a month to Anthropic for the latest models.
It seems to me with the cost of hardware needed to run local models that, for now, it is pure hobbyist and exploratory (which is fun in its own right)
pjmlp 3 days ago [-]
Only if blessed with enough RAM and disk space,
> 64 GB RAM and 1TB storage
Ah ok, not something regular joe and jane happen to have lying around at home.
Additionally the whole configuration is still very much low level, bunch of CLI commands, and if the model doesn't fit for the task at hand, it starts allucinating, generating gibberish, whatever.
sparkling 3 days ago [-]
Even if i had such a machine, im not sure i would be willing to sacrifice 80% of my RAM and 50% of my disk to run a semi-okay model locally.
His program uses quantization, but is very optimised and has builds that can fit into 96GB of memory with great results.
DS4 Flash is usually my go-to for a lot of things these days, and I don't have to worry about a cloud model stopping or telling me it's concerned about my usage.
andix 3 days ago [-]
Because I've seen too many people spending a lot of money on expensive hardware, without really using it in the end:
Most of those models are also available via Openrouter and many other platforms. Dirt cheap, and much faster than on consumer GPUs. Perfect to try and compare the different options.
jlengrand 3 days ago [-]
Just wanna say it's always fun and nostalgic to see authors pass by here who I was reading back when I started my career. I was reading Vicki's blogs way back, even remember learning some email parsing in python from her over 10 years ago. TY!
aliljet 3 days ago [-]
The problem here is always the cost-benefit. For $200/mo, you're receiving subsidized best of breed access. There's no model competing for that price anywhere. If a 27B param model is what you choose, show me your hardware! I would love to be wrong...
rsolva 3 days ago [-]
But for how long? The subsidized phase is probably short, and then what? I run Qwen 3.5 27 Dense om my old AMD RX7900XTX at about 45 t/s and barely use my Claude Code subscription anymore.
ramaseshanms 2 days ago [-]
Local models Inference never really took with non tech people. Everyday people who dont know the difference between autocorrect and GPTs. But thanks to recent hardware launches from Nvidia and AMD's in response to the MacMini series, it is quite evident that local AI will replace the conventional laptop market completely one day. Current laptops will be what Nokia represents to a iPhone or Android user. Huge Leaps ahead.
red__dragon 2 days ago [-]
Are you referring to Spark that has 128 GB of Unified Memory? It would be still expensive.
tpurves 2 days ago [-]
I do think local models are huge pending market opportunity for Apple. An M5 Ultra Mac Studio (if that exists) could be decent local AI machine, though so expensive as to stay niche. But by the M6/M7 generations and a recovery in DRAM affordability, the future could be interesting moment for them to deliver a compelling local AI platform that 'just works'. But I do think that a mini-pc that is easy to configure, can be always plugged-in, always on, higher power envelope than a laptop, but not obnoxiously loud and hot, is the right form-factor
BenRacicot 2 days ago [-]
Agreed, this is what caused me to build. This thesis exactly.
abalashov 3 days ago [-]
And if you want to dial in a setting in between: I've switched to Kimi K2.6 (now K2.7) and DeepSeek through OpenRouter and Reasonix for pretty much everything, with no discernible loss of analytical quality or utility.
However, like many commenters, I don't really believe in vibe-coding, long-horizon agentic one-shot agentic coding, etc. and do not use LLMs for huge generation tasks that involve designing things end-to-end.
I also have an MBP with 128 GB of unified memory and do quite a bit of Qwen3.6-35B-A3B. No, it's not as smart as the aforementioned models, to say nothing of frontier, but many people seem pleasantly shocked by the number of banal tasks that do not require these.
3 days ago [-]
huydotnet 3 days ago [-]
I love that local LLMs are being discussed more often on HN recently. But for the post, I find it strange that the author claimed they were working with local models from day 1, but wrote a post that still links to Qwen2.5 and Qwen3 in mid June 2026.
zahlman 2 days ago [-]
Why shouldn't the author mention models that people might not have to buy a new computer to use?
huydotnet 2 days ago [-]
One don’t have to buy a new computer to run Qwen3.6 or Qwen3.5 (35B A3B), given that they can already run Qwen3 30B A3B.
In fact with a 64GB mac, you can run pretty much all of the latest Qwen models.
Also, anyone who has been following local LLM are well aware that the quality and performance has become way way better since Qwen3.5
Computer0 3 days ago [-]
I have 16GB VRAM and 96GB Ram on all my computers and I do enjoy local models. I would not use them for coding, though I have experimented with it, it is largely a waste of time on my hardware. I love local chat with different models however, when using the model in this way it is much easier to experiment with the largest models near the limit of your hardware, and I do find it useful on the airplane somewhat. I have also used local models for data classification tasks and let it run over the weekend etc and the results were acceptable.
andix 2 days ago [-]
> For my local setup, I’m currently [..] and LM Studio as the inference server, although it would likely be faster if I just used llama.cpp directly
Is there any truth to this claim? LM Studio uses llama.cpp to run the models. I guess the overhead of LM Studio should be minimal.
After all LM Studio is a really easy way to host models, are there really major drawbacks?
cuvinny 2 days ago [-]
LM Studio has a lot less tuning options when you launch it. Also it is precompiled so you don't have the latest (and sometimes buggy) releases so you may have to wait a few days to try out a MTP or a new model. LM Studio is easier though.
cautiouscat 3 days ago [-]
> I have no concrete scientific evidence of this - my own personal vibe metric of “is a model good enough” is, “do I have to double-check it against an API model”, and GPT-OSS was the first one where I started doing that a lot less often.
The good old butt dyno!
I’ve been eyeing local models more and more with Anthropic squeezing more and more on the subscriptions. A few comments on HN had me waiting until they improved more but this article makes me wonder if I should reconsider that.
I’ve been doing some pretty niche development using a game and a script extender for said game. If these models can handle that, I’d feel good about switching.
jnaina 2 days ago [-]
Running Qwen3-30B-A3B-Instruct-2507-AWQ-4bit on an Olares One with NVIDIA GeForce RTX 5090 Mobile GPU (24GB GDDR7 VRAM) and an Intel Core Ultra 9 275HX processor.
Plenty fast for coding work and for sharing with my OpenClaw setup.
Currently in the process of adding another external GPU (RTX 4090 with pipeline parallelism) via thunderbolt 5 to the Olares One box, for higher quantization, possibly 8-bit, larger context, better concurrency, more kv cache.
robertkarl 3 days ago [-]
You can trade off latency / accuracy / cost for any ML task. And with the local models.... the cost is free.
Having a local Qwen check another Qwen's work increases the accuracy quite a bit at the cost of more latency. You can't have your cake and eat it too.
In benchmarking local models, I'm having success increasing even a 9B qwen's score on terminal-bench adjacent problems, just by asking it to plan and handing the plan back to qwen with a fresh context. Try it with Qwen3.5, unsloth Q4+, and a thinking budget of around 1024 tokens.
cube00 3 days ago [-]
The challenge I have is getting a large enough context window so tool calls work reliably, the local models easily slip into hallucinated JSON tool responses and won't trigger the tools as a result.
glaslong 3 days ago [-]
Same here. I'm curious what others loving Qwen are doing differently, because it constantly hits this issue for me. It's been great for autofilling blocks, but difficult for me to use agentically.
ronef 2 days ago [-]
What's the best practice right now for setting these up? We've been primarily using Nix/Flox to set up the models pretty quickly and at least with minimized amount of commands(biased Nix/Floxer) here and found it useful
hamburgererror 2 days ago [-]
Do you all use local models only for coding? What about using them as decision assistant? For instance, I work in science and sometimes I have many scattered ideas that I'd like to feed into an LLM so I can refine them and extract a meaningful research question. Are local LLM suited for that task?
probably_wrong 2 days ago [-]
After predictably failing at generating a sewing pattern, Gemini gave me yesterday this excuse:
> Because AI generates pixels based on visual patterns rather than mathematical geometry, it creates the illusion of a sewing pattern without any of the functional blueprints required to actually drape and construct a real garment.
If you want the illusion of a meaningful research question then sure, local models will give you that.
Mr_Eri_Atlov 3 days ago [-]
I think this is a pivotal moment for LLMs.
Gemma 4 and Qwen3.6 27B aren't perfect, yet they are such a step forward from the previous generation that it's both feasible to get stuff done locally with patience and very likely that future releases will subvert cloud capabilities entirely.
Plus, they have definite reliability advantages over cloud models that can be wiped out by a government order or lobotomized to handle traffic surges.
b3ing 3 days ago [-]
They are ok for simple stuff, coding is weak, chat is alright, writing is ok. But I had many of them write stories for ideas and they kept using the same names regardless of what the story was about. I can’t complain, it’s free. Can’t wait till they get even better, but for local image generation they are good, slow but just create a bunch in the background while you do other things otherwise it’s like 14.4k modems
ios-contractor 2 days ago [-]
I subscribe to this guy on youtube for local model stuff if anyone is interested https://www.youtube.com/@AZisk. I'm not affiliated and I'm not even a paying subscriber. But I like all stuff local.
andwhatisthis 2 days ago [-]
I clicked and immediately subscribed, but then checked out his latest videos and was so put off by the stereotypical clickbait stuff (stupid faces on thumbnails, "I tried (...) and then THIS happened" etc) that I unsubscribed. I understand that it must be what one needs to do to maximize views and brown nose the recommendation algorithm but I just find it incredibly off putting
ios-contractor 2 days ago [-]
I agree. They didn't bother me that much yet but I totally feel you
jauntywundrkind 3 days ago [-]
i'd love to get to a point where big models can launch subagents that are fast and local. there's a lot of focus on token rate, but just as much, the way cloud providers have other latencies & processing styles not optimized for latency (running large batches all at once), and i think local might have some real wins. Gemma 4 seems already on the right track. lfm2.5-8b-a1b (https://www.liquid.ai/blog/lfm2-5-8b-a1b) and DiffusionGemma seem to both be very high token rate. but getting that latency down, so that a series of tool calls can happen faster, would be a real win. I think especially with good prompting that becomes much more possible.
One caveat, I have absolutely no patience for a lot of subagent systems, like opencode, where the subagent is walled off and incommunicatable. My subagents really should be their own session, that i can deal with as I please, with some MessageChannel like offerings/tools available to them. Ideally with modes where messages auto-flow in and out, and modes where I can be a gate-monitor. https://developer.mozilla.org/en-US/docs/Web/API/MessageChan...
Asking local to be fast feels like an obvious folly, but given how much better small models have got, and seeing these models tune themselves for speed: I want to hope!
noveltyaccount 3 days ago [-]
From the recent Nvidia & Microsoft announcement about new chips for consumers:
> “Our goal is to deliver unmetered intelligence to every home and every desk with Windows,” said Satya Nadella, chairman and CEO of Microsoft. “RTX Spark marks a real breakthrough towards that vision.”
Makes me optimistic that those two companies are going to keep investing in quality local models.
3 days ago [-]
hank808 3 days ago [-]
Local models are good? Or are we saying that open source/open weights models are good? What I'm asking is, are they good because they are "local" or are they good because you can install and run them yourself, wherever you want? Same node, different node, different cluster, way out in the ether/cloud...
dakolli 3 days ago [-]
It doesn't make sense, if your small local model is 75% as effective as a frontier model and frontier models are still what.. 50% effective maybe slightly more, with tons of downsides.. Why would I spend 5k on hardware to run these mediocre models. I don't really see the point in the frontier model either.
daniban 3 days ago [-]
With Apple silicon and now the RTX Spark there are real discussions whether local AI is the future. The only problem is Western open source models are so far behind. I genuinely feel there's a push to fix this. Gemma is getting more frequent releases and Nvdia is quietly creating very cool small models. I hope both the hardware and models catch up and local really does emerge.
acb12 2 days ago [-]
What are the minimal hardware requirements to run a reasonable good local model for real SWE work these days? And have a reasonable inference speed? Seems like the requirement are pretty high and the inference speed is not ideal.
jotato 3 days ago [-]
I currently have a desktop with a 4060 ti (16gb of vram). Most models I have tested that fit within that are not good enough for anything other then type completion (in regards to coding tasks)
I have been considering getting the 58gb Mac Mini but that is a decent amount of money to spend without confirmation on a) how fast is it and b) will it work for well-defined tasks.
jszymborski 3 days ago [-]
I run local models and they work fine for me, but specifically for use in coding harnesses, I'm having a hard time. Tools tend to end up in the same loop, trying to `ls` the same folder or `grep` the same file, over and over and eating up the whole context. Super hard to get it to do anything but that. Any tips?
throwarayes 3 days ago [-]
I am happy to pay OpenAI for a cheaper model a few generations behind. But they deprecate models aggressively. They push you to bigger and smarter models, when 95% of my work doesn’t need it.
I’d love it if model providers just let old models run and let us pay less, but the deprecation makes me want to look into local models.
restlake 2 days ago [-]
my most mind blowing recent development here was testing the Gemma 4 models at release for vision and image recognition vs some benchmarks I had from using Gemma 3 for the same tasks. Gemma 4 is significantly faster and massively more accurate, to a level where I fundamentally can finally turn off my wifi and run a batch of my photos through the local model and trust the results for the extensive classification that Gemma seems well suited to handle. incredible times for local LLMs
fridder 3 days ago [-]
Is there a local harness designed around the local model use case that is claude code like? Opencode has been problematic at times, pi works for one off for me but not back and forth conversations with the LLM. Considering I only use Qwen or Gemma models I'm close to just writing my own at this point
anax32 3 days ago [-]
I've just made a milestone on my project, moving away from AWS (budget) to self-hosted and the local models are so much faster than in the past. Beyond LLMs, having embeddings, image, video, audio gen available is crazy.
Running locally is the bar; it's hard to make these things a service which scales.
MrKoby07 3 days ago [-]
I think a lot of people just don't have specs like that, making it still painful.
k__ 3 days ago [-]
I tried some smaller Gemma4 and Qwen3.6 quants on my MBA with M5/16GB and had like 20-60 tokens per second. At 60 it felt pretty okay and that hardware is on the lower end.
I'd assume a Mac with 32-64GB memory would get some reasonable results.
dakolli 3 days ago [-]
Imagine spending $5k to run a 32B param llm locally.. You could run much more capable open source models through Openrouter for years running 24/7 at 50tps. This will never make sense to me.
WASDx 3 days ago [-]
Looking at some benchmarks, the latest ~30B Gemma/Qwen score similar as Claude or GPT versions that were released just one year earlier. That's crazy progress. I can't imagine how it will be in a few years.
ta-run 3 days ago [-]
Not related, but, I can't seem to get my copilot-cli (office is an MS shop) use qwen3.5:27b on ollama for some odd reason.
After the recent changes to usage, I've spent an annoyingly long number of hours trying to get this to work.
i've been running qwen 3.6 35B A3B with llama.cpp on a 3090ti. i have found it better then sonnet in many ways. Speed and iterations was key. here is the gist of my current configuration: https://gist.github.com/spencerkittleson/5e44b6895a17ca45161... I use this with tailscale so all my devices have full access to it. That machine get toasty....
prlin 3 days ago [-]
If you wanted to do some research or learn about post training and agent harnesses, is that a good option with these local models? What hardware is recommended, or easiest to go with a Mac Studio with 64GB+ RAM?
mohamedkoubaa 3 days ago [-]
I wonder when a cheaper consumer grade inference chip will hit the market. The general purpose GPUs have much more silicon and complex firmware than what's strictly needed for inference
wrxd 3 days ago [-]
I wonder how much local models hallucinate. I am getting almost daily an "Honest answers: I made that up." reply from Claude Opus when I challenge some silly thing it's trying to do.
xbmcuser 2 days ago [-]
Running local models might be good but until the virtual hardware monopolies of tsmc and others is broken they will out of reach for most people.
blobbers 3 days ago [-]
Have you tried optimizing for MLX? It seems like a waste to have neural cores and not use them.
I've often wondered why the hype around apple neural core when 99% of software doesn't use them.
genxy 3 days ago [-]
Yeah, first think I looked for on the post was MLX and it wasn't there.
When using benchmarks, it gives more-or-less the level of SotA mid-late 2025.
iagooar 3 days ago [-]
I run the exact same model, on the exact same hardware - amazing results. Pair it with good search skills (Tavily, Brave, Exa) and you have a near-SOTA model on your desk.
wizzledonker 3 days ago [-]
Did you mean 2025?
stared 3 days ago [-]
Yes, fixed
malkosta 3 days ago [-]
The problem with QWEN is that it just can't edit files reliably, I had to hack Pi all over to reduce the pain, but still far from perfect...does Gemma 4 strugle on this?
zx8080 3 days ago [-]
> None of these are groundbreaking tasks (again, a lot of personalized Google/docs lookups)
Does it really needs a GPU at 300Watts to do all that tasks?
lthi747 3 days ago [-]
Maybe it is good but it is very difficult, or at least with regular computer. For users like me with 16GB laptop it is almost impossible task.
aidenn0 2 days ago [-]
Can anybody recommend sub $10k hardware that can run the models mentioned in TFA at something faster than a snails-pace?
kristopolous 2 days ago [-]
the next thing that people are going to race for is strix/gorgon halo (coming out soon). Still kind of not known.
Also the R9700 rocm is 32gb, 1350, available now. It's like 1/3 the price of what 5090s go for and you can get the slimmer models for that price so you can pack more in.
If I had to build right this second I'd do small form factor strix halo with a Radeon card.
You can get all those parts in like 3 days, msrp, no hassles. the only thing you're paying out the nose for is the ran
Good news is mobo manufacturers are adding more slots so you don't have to get robbed paying for 32 or 64gb modules
pinstripes 2 days ago [-]
I very much enjoy scrolling r/homelabs ever so often, so many cool local rigs there
ibizaman 3 days ago [-]
Tangential but reading on mobile, the font size in the code snippets are all over the place. I actually have the same issue on my blog. Anyone knows why?
shunia_huang 1 days ago [-]
fav-ed this post and will check again when another one poped on front page and says "local models is perfect now"
Natalia724 1 days ago [-]
"Good now" feels like the right bar. I still wouldn't use local models for everything, but for quick edits, grep-like code questions, and private notes they are already useful.
lanycrost 2 days ago [-]
I'm crazy for gemma and Qwen, really hope we will be able to run LLMS everywhere like a Doom
nikagrawal121 3 days ago [-]
I tried for my legal AI application that I'm building and it was able to do majority of the tasks. I used gemma4:26B
walmas 3 days ago [-]
Maybe the future isn't Data Centers, climate crisis, drought, and endless subscription and token fees.
ricardobayes 2 days ago [-]
They are good, and yesterday's release GLM 5.2 even benchmarks really close to Opus.
bthornbury 3 days ago [-]
the qwopus 27b model is good for grunt work style tasks, even across multiple files. Piping a bunch of things through, small factoring changes, stuff that just takes time to type out.
I wouldn't rely on it for large stuff like codex though. I haven't tried out deepseek/kimi, if we could run those locally it would be great.
ridruejo 3 days ago [-]
Local models are one of the main drivers for our installer / Desktop app for OpenClaw https://holaclaw.ai (disclaimer I am one of the founders). The smaller models are really only suitable for the most basic tasks, but if you have 32gb-64gb you can get real work done (ie complex web workflows) without third party hosted models
Muaz_Ashraf 2 days ago [-]
for the past few days I am building things via local models and review and fix the bugs from opus. Its working okay but still local models are Just HYPE and Irritating.
fl4regun 3 days ago [-]
In my experience, with a system of 32GB RAM and 24GB VRAM, no, they aren't that good.
osigurdson 3 days ago [-]
Running AI on timesharing mainframes does seem like an odd final state for the world.
fg137 3 days ago [-]
> I have a 2022 M2 Mac with 64 GB RAM
I closed the article after that.
The author has no idea what a privilege it is to have a machine like that for personal use, and how 99% of the population are not going to afford a setup like that.
Just some back-of-the-envelope maths will tell you that a $20/month Claude subscription makes much more sense financially.
orf 3 days ago [-]
99% of the population don’t code using models, local or remote. So that’s a useless metric.
What % of developers could afford an older MacBook model, second hand? Far, far more than 1%.
DiabloD3 2 days ago [-]
But why would developers _step down_ to a Mac?
orf 2 days ago [-]
Are you making an honest attempt at stating your opinion that there is absolutely no reason to prefer a MacBook over your chosen device?
Or are you just being glib because you’ve got a misplaced superiority complex?
DiabloD3 1 days ago [-]
Not being glib at all.
They're overpriced toys. Too little CPU, too little GPU, too little RAM, and what RAM you do have has too little memory bandwidth to serve both the CPU and GPU at the same time (which still hasn't been fixed for the newest M series CPUs: the GPU can still starve the CPU out, they still do not share bandwidth correctly).
And since this is about local inference: dealing with Metal sucks, and dealing with the NPU sucks. NPUs are nightmares to infer with because you're always stuck using models quantized for them exclusively, which often means poorly quantized models (such as giving up mixed quant models, and burning your finite RAM just to keep the model from going insane).
Not only that, they can't meaningfully run Linux, so they have no life after the desktop, they just become e-waste.
Hell, even if I held one hand behind my back and _only_ looked at unified RAM machines, Apple doesn't currently sell an M5 Mac Studio, and the MBP M5 /w 128GB of RAM starts at $5.4k, and presumably, the M5 Mac Studio will cost roughly the same.
I can buy the overpriced Framework Workstation with a better CPU, a better GPU, and can run Linux or Windows and that starts at $3.5k.
Or I can just not be a dumb shit and build an inference rig with a 9800x3D, however much normal RAM I want (48 or 64GB is enough here), and then drop two 9060XTs (16GB, $500 each) in there, or two W9700 in there (9070XT /w 32GB, $1100 each), or a single 5090 ($2k, but only 32GB, the worst option of the three), and infer several times faster than all the above options while spending less money.
Inference requires two important things Apple either can't do, or can't do cheaply: RAM bandwidth and RAM amount.
fg137 3 days ago [-]
could or will?
I am pretty sure even among software engineers, much fewer than 1% are going to spend their money on that.
Most software engineers know how to spend their money responsibly.
orf 3 days ago [-]
That’s not at all what you said though, was it?
fg137 3 days ago [-]
Read it again.
orf 3 days ago [-]
> how 99% of the population are not going to afford a setup like that
> could or will? much fewer than 1% are going to spend their money on that.
It’s ok to change your point, you don’t need to get combative.
Not that it makes any difference, given their ~10% market share.
AgentMasterRace 2 days ago [-]
If you have an extra PC and enjoy 5 tokens a second... Sure
holoduke 3 days ago [-]
Good? My Macbook m3 with 36gb locked up after it filled all memory with Gemma4. A bit useful yes. But it eats all resources. For local models to be useful we need at least 128gb of system memory and 512gb of video memory. Plus 8 times the compute of a single 5090/h200
0xbadcafebee 3 days ago [-]
Local models have been good for a while. But this being the HN echo chamber, people here think that local models can only be used for coding, and are expecting Opus 4.8 on their iPhone. Turns out AI can be used for things other than just coding. Even tiny models (<4B parameters) can do tons of useful things on local devices. Search, index, summarization, troubleshooting, crafting documents/formatting, image analysis, transcription, object identification, robot navigation, text-to-speech, speech-to-text, browser/window control, MCP/tool calls, and much more.
Larger models just do more complex reasoning. But if you want them to be really good, you need a beefy Mac. They have the best combination of memory bandwidth and RAM to allow medium-sized models to run at speed. GPUs have less memory but more bandwidth, and AMD iGPUs have more memory but less bandwidth. The Mac is the best compromise on the market today.
Once you do have a beefy Mac, you want to run a dense model. This gives you the best possible result with the system you have. You can go MoE for faster results, use cutting-edge inference techniques, parameter tweaks, etc. But a basic dense model (at Q6 quant) on a big-ass mac will serve 90% of your coding needs.
frollogaston 3 days ago [-]
"Good" refers to the speed and not the quality. There's so much hype about Macs being great for LLMs, but nobody seems to be seriously using them for that because the open models are unfortunately so far behind.
drchaim 3 days ago [-]
really want to try local models, but I don't have the hardware yet. Probably I'm the only one here still using a Mac Mini m1 8gb 2020. :/
tennfown 3 days ago [-]
I have some decent specs, but I’m stuck with AMD graphics card which I’ve been told is a non-starter
ZionBoggan 3 days ago [-]
This is actually a really insightful post !
Patchistry 2 days ago [-]
do you run you local models along side some of your "paid" models?
henryoman 2 days ago [-]
Will there be a gemma4n
atulmy 3 days ago [-]
Exact reason I'm building csuite.so, do check it out and let me know if you need early access!
sn0n 2 days ago [-]
Qwen 3? Qwen 2.5 coder?? Is this an llm article written on an outdated model?? LoL
dbg31415 2 days ago [-]
They misspelled “Better than before. But… yeah.”
matrix12 3 days ago [-]
gemma:12b at 75% of frontier?
Yeah....
etoxin 2 days ago [-]
I think 75% is about right. It calls tools pretty well and has a good knowledge base. It's absolutely not 90% there, but 75% feels right.
jingw222 3 days ago [-]
open source must win
pauljeba 2 days ago [-]
How do I beleive thi? you wrote this blog by hand.lol
monegator 3 days ago [-]
I've been trying local models for the boring stuff you might be thinking about: writing small docs.
So i've tested a couple, and the speed is finally impressive. My colleague uses paid tiers of claude and GPT, and the speed is comparable. Maybe even slightly faster on my end.
The problem is: i'm running the model on my work laptop, a 12th gen i5 with 16GB of RAM (which, you know, i asked to upgrade to 64, but that was right at the time of the great RAM shortage of the '20s) so i'm pretty limited in what i can use. And this is running alongside the usual suspects: Web browser hugging 1.5GB, MPLABX hugging 3, windows taking at least 5 just to sit idle, thermal throttled to 1GHz ... And yet its speed is comparable to a paid service. A lunch's worth of tokens vs a few cents of power.
So, what i found, what i fount...
What i found is that i need AT LEAST 16k of context window, otherwise they will halt when i pass a small C file for analysis. And coding models will shit the bed with 4k. But we all know that, context size is King.
I found out that Qwen will keep looping while thinking, but that's not a surprise to you, either. But give it enough time and you will get an useful answer. I was hoping to using it as a better warning system for some languages, but i fear i need muuuch more context size, because i tried to feed a file that had a function with an endless loop:
At 4k context it almost shit the bed if i gave it just the offending function, then told it where to look at.
At 16k context, with the whole file, it needed some guidance to what the problem was, and after 10-15 minutes of thinking it found the issue. Problem is, it kept second guessing itself for another 20 minutes on the same unrelated thing before giving the output. For which the fix was wrong, but the semanthic was correct. Good enough. Maybe it will be faster if i don't ask for a fix (which i didn't i just asked to look for a specific issue)
Wish i had 3 times the RAM so i can see what happens with more context.
Then i gave it the task to analyze a C file to make an API document. It took half an hour, but then i had a good starting point, which i had to keep changing because it would confuse commands with IDs and things like that.
This was the Qwen 3.5 9B model.
I then tested Gemma 4, being impressed at the tokens per second it gives on my Pixel 8A. Same tasks: same issues with short context, with long context it gave absolutely useless answers when looking at code, but it took 1/3 the time of qwen.
In producing documentation, instead, it was much faster, and it never hallucinated data. Good. in 15 minutes i had everything done.
Not bad for stuff running on a business laptop, while doing actual work.
Tomorrow i will try Qwen 3.6, let's see how it goes..
pauljeba 2 days ago [-]
How do I beleive you? You wrote this post by hand. lol
mantlemd 1 days ago [-]
[flagged]
TaniaDictee 2 days ago [-]
[flagged]
iyia 2 days ago [-]
[flagged]
hottrends 3 days ago [-]
[flagged]
aplomb1026 3 days ago [-]
[flagged]
pcell 2 days ago [-]
[flagged]
kordlessagain 3 days ago [-]
[dead]
eugmai86 3 days ago [-]
[flagged]
Veer_Pratap08 3 days ago [-]
[flagged]
3 days ago [-]
maxothex 3 days ago [-]
[flagged]
RishiByte 3 days ago [-]
[flagged]
Littice 3 days ago [-]
[flagged]
mlpicker 2 days ago [-]
[flagged]
mrkn1 3 days ago [-]
[flagged]
jkwang 2 days ago [-]
[flagged]
Rekindle8090 3 days ago [-]
[dead]
azzzxcc123 3 days ago [-]
[dead]
0xdecrypt 2 days ago [-]
[flagged]
huflungdung 3 days ago [-]
[dead]
Lapsa 3 days ago [-]
[dead]
iluvcommunism 3 days ago [-]
[dead]
zrg 2 days ago [-]
tldr it is not
aleksandrm 3 days ago [-]
Clickbait title, because running local models is still not good now.
You have dense models (qwen 27b, gemma 31b) who are pretty smart, but pretty slow
You have MoE models (gemma 26b, qwen 35b, north mini code 30b) who are pretty fast, but make a lot of mistakes
You need a lot of memory to run these well, quantization makes tool calling weaker, so most run at 4 bit quants and are wondering why it kinda sucks and that's because you've essentially lobotomized the model (I recommend unsloth quants, i recommend 6bit for MoEs and 5bit for dense)
So you need a lot of compute to make the pre-fill fast, you need bandwidth to make the decode fast, you need a lot of memory to hold everything - lot of ifs
On top of that, your laptop becomes a loud hot churning machine, it's uncomfortable to work with.
So are they good? not really. Do they work? yes
edit: just wanna clarify - i think open models are the future, i think they're super important, i'm contributing constantly to the ecosystem - i think people should play around with these models, i think people should use `pi` and learn how it all works - but don't download a model expecting it to be good out of the box, you will have to tune and configure a lot of stuff to replace a "coding agent" that most people are using models for
The best "free" experience I've found is using OpenCode with Big Pickle. It's not especially smart, so it often won't produce the correct result the first time, but the free tier is generous enough that I don't think I've hit the limit more than twice over around a month with frequent multi-hour sessions. If running locally is truly the goal, it's not going to fit the bill, but if the goal is just "get the best experience without having to pay for a sub or tokens", it's the least bad option I've found so far.
I have absolutely zero interest in free. I honestly don't think I'm even remotely in the same demographic as people using free tiers / models.
I want to pay. I don't want my data used for training. I want it to be open. I want it to be consistently up (more than Claude!). I want it to be fast. I don't want it to be subsidized as that's just an excuse for shitty quality. Deepseek flash knocks it out of the park on all of these except you're data is used in training. I'm fine with it being hosted since there's no way I'm using it 24/7, but data MUST be private.
Basically I want Hetzner and OVH to run open model clouds. I'm convinced this is going to happen eventually when everyone realizes this is a commodity.
The fact that they've trained models on data that wasn't theirs does not make me trust them a lot when they make this claim.
Again, I know these arguments have been done to death, but every human who reads source code that wasn't written by them, or views art that wasn't created by them, and practices against this art, is training their brain on data "that wasn't theirs".
They are frequently making a living doing so.
Is this distinction the scale, or is there actually a different more strict definition that we should be using as a common language to talk about this? As in, I should not even be reading certain source code if it is not licensed appropriate, or I will be in breach because I'm training myself illegally? And the same question for art, etc?
It hinges somewhat on the concept of how much you believe things are being learned and how much is just pattern matching and borrowing a solution from memory. Certainly in the early days of Copilot it was possible to get it to output chunks of open source code near verbatim.
I think, generally, people are probably closer to believing that there is some kind of reasoning being carried out by these models than in those early days but it would also be easy to strip all of the immediately identifiable comments etc from the training materials to make it harder to detect.
It's easy to show that this is not the case. This is a well-known phenomenon in ML, known as generalization - specifically, compositional generalization. See e.g. https://research.google/blog/measuring-compositional-general... for a description - although note that that post is from 2020, and models have become much better at this since then.
People can "believe" what they want, but there's plenty of work that definitively falsifies beliefs about "borrowing a solution from memory".
A human who trains their brain on material they don't own then creates art or writes code based on this training, sells the product too.
(Not a lawyer, just a nerd)
The contention is obvious in your statement. Is it illegal to train a model, and why? Why is it legal to train a human on copyright material and then sell those skills, vs training a computer and selling the skills?
This isn't black and white.
But I agree with your larger point. AI companies have copied Uber's aggressive posture, pushing the legal envelope with expectations of positive return. Surely they'll continue doing the same in other areas.
More than that, they have various zero data retention options and provide a convenient json list of them.
Plumbing you straight through would require nonstandard certificate juggling and they wouldn't be able to implement their core service of providing a standardized API nor could they transparently route your request to the fastest / cheapest / whatever provider on the fly nor could they implement transparent fallback nor could they implement their policy of not billing you if the response from the provider is invalid.
Also the chosen provider could fingerprint your network stack if you communicated directly. The routing service is acting as a proxy and for most providers fully anonymizes requests (it does send a stable uid to some of them though).
There'll probably need to be a threat of massive litigation should they fail to comply with such a policy.
Maybe people will trust companies, but those companies will rarely deserve that trust. Anyone that pays attention sees breach announcements almost every day. Security is never a concern for these companies until it embarrasses them. Then, as soon as the negative attention fades, security again becomes the second to last priority.
Do not trust companies with any data that is important to you unless the effective management of that data is required by law, and the laws are comprehensive.
I'm interested in this thought. There is significant motivation for providers to create a verifiable way for them not to deal with having access to client interactions with LLMs at all. Whatever standards and protocols have to be come up with in order to reassure clients.
Any good standards for privacy when interacting with LLMs could also trickle down to smaller providers, and everyone could offer guarantees. Even if the guarantee was literally just an insurance policy and a private court to decide if it pays out.
Bedrock in fact does not train on your data. It was a big deal when it was announced that they share data with Anthropic for Fable, but even then it was gated away where you’d have to explicitly allow it.
You can run Qwen3 on OVH already:
<https://www.ovhcloud.com/en/public-cloud/ai-endpoints/catalo...>
Does anyone know if OVH is ignoring the law here, or whether it does not apply for some reason?
There are much less (almost no) disclosure regulations on the deployer.
https://ethicalogic.com/articles/gpai-guide-roles-public-dat...
Not doubting you — just want to read it!
The definition of a "genral-purpose AI model" is described in more detail in the "Guidelines on the scope of obligations for providers of general-purpose AI models under the AI Act": https://ec.europa.eu/newsroom/dae/redirection/document/11834...
For me, paying from $200 - $500 / month is reasonable if I can sustain a disruption free flow that doesn't require constant yak shaving. What I've found experimenting with DeepSeek on some open source library stuff is that it's actually going to cost me much less if I don't need frontier vibing (which I don't).
I wonder if there are competent models trained purely on permissive open-source code like MIT or Apache 2.0.
The odd jank extends further, like Sonatype Nexus and some other software hardcodes AWS regions to choose from when configuring the storage even though your self-hosted implementation doesn’t have anything to do with AWS so you just have to come up with fake regions. If the cloud vendors each have to reimplement it because there is nothing as quality as PostgreSQL is for DBs, but for S3, then I’m hardly surprised at the state of things.
Locally I haven’t gone much further than 8k. That is sufficient for small changes on small code bases. And you need condensed tool output.
I haven’t tried any tool that compresses the tokens yet.
1. The hardware will eventually catch up.
2. This keeps the delta between frontier models smaller.
3. We can still fine tune and own the weights.
4. The models will be more useful, faster, and reliable.
RTX is hobbyist tier, not professional tier.
Gated cloud models from hyperscalers treat us like hobbyists in their own right.
We need equivalent scale models, but open.
This is what RunPod-type services are for.
For instance, ComfyUI is an abomination that can't do half of what Nano Banana and Seedance 2.0 can do. And you have to sit around and wait 10x longer for single results.
I can rent an H200 for $3.50 an hour. That's INSANELY cheap.
I do not understand this split between hosted APIs and rinky-dink local RTX models. Both suck.
The ideal solution is models we own run on RunPods leveraging H200s.
I can spend $100-200/day on compute making much more value with the model outputs.
----
edit: I want to respond to comments, but the damned HN rate limits keep me to five comments a day now because I'm a contrarian and say things that rile up the anti-AI folks.
You don't need to buy an H200. It's a depreciating asset. You rent one. It's cheap to rent.
However, we need to use the tools that we have. Even if I wanted to buy a (bunch of) H200 for me and my colleagues and could get the expense approved, they are hard to source where we are.
Yes. You can rent them, but I’m not sure how that affects the IP discussion.
Moreover, not everyone is doing coding and video so we have different tasks that can fit quite well on relatively light laptops (Gemma et al), for relatively directed coding sessions we can make do with RTX cards, or a small step up, all the way to H200 in the workstation. Or pods thereof.
We have the graphics cards and laptops with MLX right now. The H200 will take a year at least to arrive. Better get used to run stuff locally.
That’s hardly contrarian here, lol.
I swear, two thirds of the folks here just make comments that dunk on AI. They underestimate it, hate it, hate those that use it, etc. It's the "old angry man yells at cloud" trope.
I've had so many consecutive days of "-4" karma posts that HN is blocking me from commenting. And the comment retorts I get from these folks are absolute gems that will undoubtedly age like milk.
My suggestions if you want to further experiment with local models are to use llama.cpp instead of ollama [1], learn a little about the parameters that tune how much VRAM is used [2], look online for jinja template fixes for the model you're testing [3], and choose a model that was designed to do the task you want to achieve, with as high quantization as you can fit. The maximum model size you can run is VRAM + RAM, although you want as little of the model to be in system RAM as possible.
I'm running North Mini Code IQ3_XXS with some tuned parameters to fit my current tasks, and while it is not perfect for everything, it has not failed any tool calls I've asked it to make, or that it figured it should make on its own.
[1]: https://sleepingrobots.com/dreams/stop-using-ollama/
[2]: https://github.com/ggml-org/llama.cpp/blob/master/tools/serv...
[3]: https://gist.github.com/jscott3201/e4b155885cc68c038d6ac8909...
For llms Sadly the only model right now that fits the bill for LLM is GPT 4.1 and it’s standard in my stack because thinking models have unacceptable latency(>=1 sec) even though they are good at tool calling. The main issue with 4.1 is that it can make still mistakes and prompt prose has to be tuned quite a bit.
I wonder if any local models can be tuned to match the response time and tool calling while supporting many languages.
Or at least LM Studio if you want to play around with a lot of different models. Im currently using it with my 7800xt and Vulcan as i found it left my OS more stable ROCm does. I had a few system crashes with ROCm and running out of VRAM for the OS.
They now offer DeepSeek V4 Flash for free and it def feels like a step up.
Sounds like you were either running at a too-low quant, or you were trying to do Agents with something like Qwen 3.5 9B? Qwen 3.6 27B at Q4_K_M I can have that at running all night after a single one-shot a, Anne when I come back in the morning, it’s done
If you throw the right GPUs at the problem, they become much better - but still not quite in the realm of Sonnet or DeepSeek 4 Flash, let alone Opus / DeepSeek Pro or Mythos/Fable/GPT-5.5.
Given enough budget, power, and cooling, you can run some pretty good data pipelines, but for code, I think it still makes sense to shell out to an API provider most of the time.
The main reasons to use local models are:
1. Self-sovereignty & control
2. Data security
3. Offline availability
If none of those apply to you, then you should just use OpenAI or Anthropic.
Ultimately if you skip over the opportunity to play with these models on your own machine you are losing out on a lot of really interesting educational opportunities — it helps make a lot of stuff feel more concrete in a way that only tinkering can.
But then I think once I had an idea of something that I was building against Gemma 4 or Qwen 3.6 I would be looking at openrouter etc., to stabilise it for the next tier of experimentation (and to get back a kind of multi-device access without tailscale/lm link etc.).
Are they good enough to replace what people seem to want to do with Claude? Maybe not. But it's an unparalleled learning opportunity.
Even faster with the MLX builds.
Then when I need more heavy lifting I fire up a larger model.
IMHO the issue isn't the models. I've had OpenClaw give the same results as Claude using open models locally. Slower but does the job. Something that can do optimal model switching is what's needed.
You can do coding and agentic fine. For coding I use qwen3.6:35b-mlx and agentic granite4.1:3b works fine.
These are the models I use.
- granite4.1:3b
- granite4.1:30b
- gpt-oss:20b
- gpt-oss:120b (less so now)
- mistral-small3.2
- qwen3.6:35b-mlx
There will always be use cases that don't sit on your laptop, but most of what can be done can be done locally, it just requires a good framework to sit on it.
You're right that prefill kills perf, but shrug the GB10 has far more compute than it has memory bandwidth, so prefill isn't it's bottleneck.
I’m getting 40tk/s decode with 1000+tk/prefill with a 198B-A11B model on mine
With the currently-in-PR implementation it doubles decode performance for all the tasks I've been testing it against, at in the worst case is still a 35% uplift, so on a box with heaps of compute and not much memory bandwidth, it's worth it in practice
It's worse at general tasks, but in the precise domain of coding I actually prefer to use it over my claude subscription because it has 0 latency (and no privacy concerns whatsoever).
> but still not quite in the realm of Sonnet or DeepSeek 4 Flash
these are not mutually exclusive anymore. DS4 has set the bar for me these days. https://github.com/antirez/ds4
me thinks there's a lot of optimization strats we're currently leaving on the table just because the amount of things to explore and test are so expansive. but this one is super interesting targeting metal primarily and zeroing in on one model. instead of a one size fits all llama.cpp im very interested to see if theres a future where super tailor-made variants per model pans out to harnesses that can rapidly switch ultimately providing something akin to sonnet/early opus territory (that's my personal bench mark of good-enough i shall now cancel the hell out of this claude sub)
With this configuration (set up over the last month) I have been working on Python data processing tools, an internal Svelte 5/SvelteKit data intensive BI app, and some smaller Rust projects. It's been doing really well there.
Prices will fall in the next few years. Maybe just play with the tiny toy models for now to learn how they work, then keep using API providers until they do.
llama-server.exe --host 0.0.0.0 --alias "Qwen3.6-27B-MTP" -m "F:\Qwen3.6-27B-UD-Q4_K_XL-MTP.gguf" -c 75000 -ngl 99 --metrics --temp 0.6 --top-p 0.95 --min-p 0.00 --top-k 20 --presence-penalty 0.0 --no-mmap -t 16 --spec-type draft-mtp --spec-draft-n-max 3 --reasoning on -fa on --parallel 1 -lv 4
Note that this does not use kv cache quants as in my case quants offload to CPU and tanks performance. Also keep in mind this almost maxes VRAM usage so any additional browsers or other programs that use VRAM should be closed. For chat go to http://localhost:8080/ and minimize the window to maximize perf as the web page UI draw itself consumes a lot of GPU perf via constant context switching.
Can try bigger than -c 75000 until perf gets lower than 100 tok/s - that means something is off as windows starts paging out memory or other issues. -c 50000 seems sweetspot if running browsers and stuff that consume 2GB VRAM. If wanting more than -c 140000 then likely need to use a bit smaller model quant.
CPU usage should be near zero, maybe 1 core load. If you see 8+ core load then settings are off and something is offloaded to CPU (for example kv cache). GPU load should be about 100%, meaning it utilizes work optimally in this case.
-t 16 can be omitted or set to the amount of physical cores, not important in this dense model that is 100% in GPU.
Can be pushed to 125 tok/s with that model if using --spec-draft-n-max 4 but VRAM usage also increases, so context needs to be smaller.
If speed is not important and want max context length then remove the draft-mtp parameters and also might need to use k and v quants like --cache-type-v q8_0, leave k f16 if possible to keep quality.
This setup is extremely optimized down to the last flag. Changing any param above the temp flag craters performance.
I don't have enough system RAM to properly handle the large context windows so I don't use local models.
Also, funny lumping the M4 "and" the M5, I find them 15% to 45% different performance, depending.
And for a good deal of work, an M3 Studio Ultra outpaces the M4 and ties the M5 on single work at a time, outpaces both doing multiple work at a time.
Ahh no I'm using the MLX version, it's about 5-10% faster than GGUFs in my experience.
The Q4_K_XL bit for those not in the know.
local models do involve some context engineering to get it okay, but it's not that rough
I bought the memory at the end of the last year, and I was thinking, maybe this is excessive. No game will use that much memory, in a decade or more.
Now I realize it was one of the best purchases ever, I run qwen3-coder-next on it for just the cost of the electricity, while the coding and agents and whatever else is done in a laptop. Yeah, it is slower, I don't care. Infinite tokens is better than a few.
The cloud is another computer, but in this case it is mine =)
This isn't really good enough. Many of us need to get things done in a pinch and if our employers are already getting used to the idea of paying for enterprise subscriptions to cloud llm's then the local option needs to be good
It outperforms all the Qwen models (even 100B+) for rule following/automation style tasks in my experience. Its image interpretation is also very good, and out-benchmarks Opus.
Qwen seems to ignore instructions and consistently outputs incorrect formats (when token generation format is not explicitly constrained)
But yes, on the DGX Spark Gemma 31B Q4 with MTP runs around 20 tok/s and Gemma 26B A4B around 60 tok/s. Still quite slow. But on a high end Nvidia card would run significantly faster and still fit in memory.
I'd recommend for anyone getting into local models to focus on memory bandwidth over RAM. Models under 100B parameters are now sufficient and hugely useful for automation.
I agree that for coding/creation use cases, there's still not a compelling argument for local models.
But e.g. if you want to scan a list of stocks and interpret news/high pass filtering, interpreting logs, interpreting screenshots, the local models are more than sufficient already.
Gemma will just stop mid-tool call. It's been slower and I've had to reduce context size to run it. Qwen3.6 27b has been rock solid using club 3090's single card setup for agentic use -- https://github.com/noonghunna/club-3090/blob/master/docs/SIN...
E.g. prompt A to achieve X, output in format Y. Use Y to do something in prompt B.
Agentic loops will underperform deterministic control flow pipelines (with non-determinism constrained to LLM calls).
Agents are more general, which is the main advantage. But inherently a more general solution will waste context on unnecessary reasoning.
Try asking the smaller Qwen models to output a JSON in a specific format. It basically can't do it consistently with a moderately sized prompt unless you constrain the token generation via GGML or are extremely repetitive and specific about it. (Thinking disabled)
Gemma 4 will do it correctly pretty much 100% of the time. (Thinking disabled)
Applies to other rule following as well in my experience.
Qwen may be better at toolcalling and certainly probably codegen.
It seems to me Google explicitly designed Gemma for edge device automation, and didn't fine tune for agentic or coding use cases.
I'm really surprised how much slower a DGX spark is for the same price.
1. Here's my command.
PYTORCH_CUDA_ALLOC_CONF=expandable_segments:True \ vllm serve cyankiwi/gemma-4-26B-A4B-it-AWQ-4bit \ --dtype auto \ --gpu-memory-utilization 0.95 \ --kv-cache-dtype fp8 \ --enable-chunked-prefill \ --enable-prefix-caching \ --trust-remote-code \ --enable-auto-tool-choice \ --tool-call-parser gemma4 \ --reasoning-parser gemma4 \ --max-num-batched 16000 \ --max-model-len 64000 \ --max-num-seqs 12 --speculative-config '{"model": "./gemma-4-26B-A4B-it-assistant", "num_speculative_tokens": 4}'
You can run multiple instances of these models in parallel on the DGX Spark which somewhat mitigates the difference if your task is parallelizable.
But I'd take the simplicity of a single thread and higher throughput personally.
Overall of course still better to wait for next gen devices if you can.
I was expecting it would run Q8 in 50 tok/s.
I guess that’s good I stopped thinking about buying it because I would be disappointed.
That said, I'm still running Step 3.7 Flash at ~40tk/s decode, 1000tk/s+ prefill on mine and its both very capable and fast enough
I got Gemma 31b to run on this at ~22tk/s decode at FP8 using MTP
If you don’t need the machine to respond instantly (or explain your own business model to you) everything can be local and it’s been like that for a few years now.
This is sadly also my experience. I wish we had some MoE models with a higher ratio of active parameters per total. My experience is that the newer MoE models that can run in a 64b laptop have too few active parameters to be useful outside narrower, specific tasks. Mixtral 8x7b was a 14b active parameter (56b total) MoE model a few years ago and was probably the best model one could run in that range for some time, but it is too old now.
I have been using the qwen 27b and it is great, but running a dense model like this in a macbook is a bit suboptimal, and i wish I could run sth faster than 15 tok/s.
I'm on a 48gb M5 Pro right now and it's been okay, a lot of my rough experiences have been with MLX and I'm finding that GGUFs are okay now
Laptop?
OK, I've made that mistake before. I understand modern laptops are powerful, but nobody wanting to do serious AI/ML work should be using a laptop for anything other than SSH or similar low-performance access into a proper system.
Years ago I fried two laptops just doing finite element analysis work running 18+ hours per day. It was one of those "I'm giving you all she's got, Captain!" workloads. They fried, even with powerful fans cooling them. I should have known better. Such workloads belong on purpose built systems.
You are somehow assuming cloud-based models are not painful.
I can tell you my past experience. I was using GPT 5.5 and Claude Opus interchangeably and I prompted them to implement a feature. I paid attention to the agent window and it was literally screwing up implementations, causing tests to fail, and going into test-fail-fix loops to clean up after itself. After a few minutes, it finally called it done. That run cost $0.60.
I went to review the code and only half of the source files complied with the instruction files. I prompted the model to clarify why it failed to comply with the instruction file. The model outputs "you are right, I should have complied with the instruction files. That prompt cost $0.30.
I prompted the model to proceed and apply the instruction file prompts. It went ahead and applied changes. Success. It cost $0.16.
I reviewed the code again. Only half of the sloppy code was touched up. I prompted it to fix the whole mess, not just a couple of files. It complied. One coin less in my purse.
So, around a third of the cost of a feature is spent on the model cleaning the mess it left in it's wake.
And this was a tiny feature with a plan, a solid set of instruction files.
Very expensive.
Are costs going down? I doubt so. OpenAI seems to still be spending 3 times it's revenue already.
In comparison, local models sound very good.
In fact it really feels like OpenAI models have taken a nose dive this week compared with Claude. At least for my specific workloads (these things are so variable it’s like trying to compare Google results…)
The real lovely thing was getting 300+ Tok/s (Gemma 4 26B QAT + MTP at UD-Q4_K_XL) (at peak, I think I saw vram usage reach 21 GB of vram)
This really depends on how and what you're using. e.g. I can't suffer through slowness of inference on Macbook but I have gaming rig with quite powerful GPU and I squeeze ~130 t/s on Gemma or ~70t/s on Qwen.
Tuning is not optional as well. Qwen on temperatures > 0.5 is unusable for coding and I found sweet spot around 0.32 for coding. Speculative decoding on Gemma4 26B is a 30t/s difference between non-speculative.
The worst thing with local models is that I can't just give you a recipe, because what's the best params depends on your use case.
In the nutshell I'd compare local models to running game rig on Windows vs Linux. Linux works great if not better than Windows gaming, but you need to embrace some tweaking in order to get there. Is it there? It's not SOTA, that's for sure, but it's working reasonably well.
- Maximum intelligence per VRAM (you dont have much)
- Dense models can benefit from MTP to get an almost 2x speedup in decode (ie, a 27b dense model with mtp decodes at about the same speed as a MoE model with 14b active param model would). This is important because local llm rarely has parallel streams to batch together.
When running on large unified memory like Strix Halo or Spark Dgx, MoE models are usually best:
- You can get similar intelligence as a smaller dense model with fewer active params (to compensate for the slower memory) by throwing ram at the problem.
(SSD streaming a larger-than-RAM model "solves" that latter issue very nicely because it radically slashes the equivalent to memory bandwidth so any saving on that becomes highly significant.)
I think most people using agent-like usage could easily run any number of parallel streams pretty often, but you run out of vram for multiple KV caches, unfortunately.
and if remaining local, the hardware required to run multiple poor models could be better spent running better models.
I have attempted to orchestrate using different models, loading and unloading, but the speed is not there and by the time mistakes are discovered considering the lack of quick iteration the results become worthless unless the task is trivial.
I don't care how many tokens per second of nonsense it can generate.
It may be "about as good" on some very specific task.
It is probably not smart enough for "design this whole architecture of this complex system from scratch, make no mistakes", but that is not something I want from a coding tool anyway. I want a model that I can point to a file and tell it to make some changes to the file and related files. Or that I can ask to review a PR with regards to certain aspects.
My suggestion is to simply try it and see what it feels like.
Well, you aren't going to give it a 20k line sec and have it churn out a full app after 4 hours hours.
But, you can get it to write code for you if you do the design.
I find devstral (even though it’s weak generally) much better at writing and documentation than Opus. I’m actually now delegating all documentation to devstral and away from Claude, which makes a mess.
The carpenter has to get up close and personal with the wood. He can't match the crew's throughput, but maybe that's not what he's trying to do.
(geddit?)
you get a macbook for work, you run the macbook
they're not going to start giving GPUs to employees to run local models
If I can't customise it then I won't waste my time using it it getting use to it.
Claude code is trash, it's customisability is extremely shallow, open code, codex, copilot, Kiro, etc etc... all trash. Yes even open code..
If open code was so awesome then open claw would have been based on it... But it wasn't. That's should tell you everything you need to know.
1) a "programming desktop" with a $500 upper mid range Ryzen (idr exact), 8GB VRAM Radeon card I bought solely for RuneScape, and 64GB ram
2) a maxed out Alienware 16 Area51, so it's a 5090 with 24GB vram and 64GB system ram. I bought it for gaming, of course.
I run qwen 3.6 35B A3B Q6 with 200k context window. I compare this to Claude pro max or whatever that I use at work.
The main difference between the machines is that the one with the RuneScape gpu does 10 TPS while the Alienware does 30-40tps. Both are fine though the 30-40tps is obviously a lot snappier.
I find with both models that:
- they do really well at "be a 30GB zip file of reddit and stackoverflow answers"
- they do really well at point fixing random bullshit errors that would otherwise waste my time (this is related to above of course)
- they do quite well at, given a pretty good specification of what you want, figuring it out, even if you've specified several steps needed
- they both cannot really be given a large ish task and left to just drive it on their own
The main difference between the two is with that last one, Claude is somewhat better and figuring SOMETHING out, but if Claude is having to figure it out, it's probably because I don't know what I want and it's very likely to not make a sane choice, and will generally produce slop given even the slightest amount of leash still.
I've also found that the boundary between "well specified small to medium thing" and "idk just do thing and figure it out" is the difference between you keeping control of the code and losing control. There's an "escape velocity" of AI use that, when you hit it, you're doomed to slop forever. (Or you have to deorbit... enjoy that). And while claude might have slightly higher velocity allowed while remaining suborbital, it's very diminishing returns.
So, are these models "worse" than Claude? Yeah. Am I looking forward to continued improvements? Yeah. But I now also have no desire to pay anthropic any amount of money, which has the nice side effect that i won't be helping them end up with so much money that they can distort our democracy.
Our GPU computer server cost $110k.
i use it usecases like that latter and they are fine.
As painful as it is to admit, the future might be cloud inference from a trusted provider.
You generally want to run q8 or some kind of "6bit" quantization at least.
40GB of VRAM is the entry-point in my experience, you can run qwen 3.6 35b a3b with full context or qwen 27b with about 92k of context.
Before you get fully discouraged, you don't need 1 gpu with 40GBs you can use multiple cards, with minimum impact on performance.
slowness doesn't matter a lot to me, at home. I will type up a prompt and submit it and let it run while I do other things around the house. I have all kinds of things to do, and most of them do not require sitting in front of a computer.
of course faster would be better, but it's not always a requirement. smart and slow is far better than dumb and fast or even nothing at all.
It is such a downgrade. I don't understand how that's even possible. The thing has so many strongly-held opinions I did not ever ask it for, talking just way too much and generally feeling somehow dumber.
Of course, being significantly larger, it will encode more knowledge, but that doesn't help me when I hate talking to it. And all that on top of the fact that talking with it costs real money.
I wonder what it might be that makes me hate it so much. Maybe because it doesn't see itself as a tool but almost an equal? As if its opinions would have weight.
Qwen too can act like an overeager intern, but if you tell it that it is an idiot, it will drop that ego. Not so much with Claude. In my experience, anyway.
Anyway, point is: full ack on that headline.
[0] - https://github.com/search?q=%22Assisted-by%22+user%3Aggml-or...
[1] - https://github.com/ggml-org/llama.cpp/blob/master/.pi/gg/SYS...
Gerganov, hope you will consider developing further the CLI cause we suffering with the server.
I’ve also tried OpenCode (similar but a bit less so) and Pi (fast but you have to add lots of features yourself which is a bit of a pain). Claude Code can also be pointed at a local model and works, but the default system prompt is huge. (~140k of text when I extracted mine, IIRC.)
About the harness depends on for what you need it, but basically for a universal unit of measure, Harness is multilayered and logic and domain specific dependent. I would definitely include Type of Hardware, Model parameters/knowledge, Model Intelligence, Model size/context, type of conversion, type and quantization (models comes with some default tools), but adding your (domain specific), skills, tools, memory, logs, security, Rag, Online search... (which as scary as they sound are mostly simple logics in a txt file, like if this do that).
The full pack is Harness 10, every missing thing lower the harness score.
To answer to your question I would definitely recommend smth like HugstonOne (or anyway llama.cpp CLI) with Qwen 3.6 35B finetuned/distill (deepseek 4 or claude 4.7) with none of the current coding agents out there that are screaming internet connection and proprietary API and data collection. DO this, if you can find a tool that you can download and choose a local model (of your choice in whatever folder locally) and load it ready for inference without any need of internet connection that is the tool you should aim for. Right now there is none out there.
Curious if you can share the prefill speed too?
I run locally on a crappy desktop (some AMD iGPU with Vulkan llama.cpp, 32 GB DDR4 RAM) for experimentation. I get 15 tok/s on generation for the qwen & gemma4 MoE models. I get around 150 tok/s prefill speed.
Reason I'm asking about the prefill is looking at my stats at work, I use between 20M to peaks of 300M input tokens daily. Some of those token are cached but in general, I seem to have roughly 500x more input tokens than output. So interested in prefill tok/s stats.
Huge Thank you for llama.cpp btw!!
Also, I get a lot of mileage from the ngram-based speculative decoding functionality [0] as it allows me to iterate on the implementation much faster.
[0] https://github.com/ggml-org/llama.cpp/pull/19164
I do use it the same way as you're describing on personal projects at home, in a very crude manner (pasting code snippets in llama server web UI prompt. Next will attempt OpenCode)
At work I use it in similar manner with more mature tools, but the vast majority of token spend comes from a totally different workflow: "pretend the AI is a fleet of junior/intern engineer you're delegating work to", where the agent will on its own do the implementation, commit the changes etc.
It does indeed spend a lot of tokens wandering the codebase, talking to MCPs, loading skills etc.
This really is the secret to getting the most out of these models IMO. Pi is so damned good. I have a strongly tuned Pi for running Step 3.7 Flash (IQ4_XS) and Qwen 3.6 27B (FP8)
Also, thank you for llama.cpp mate :)
[0] https://huggingface.co/ggerganov/presets/blob/main/preset.in...
Plus, I never have to worry about rate limits, quotas, or sitting in a queue during peak time. And I can always see its full thoughts, don't have to worry about where my data is getting sent, and know it can't get secretly nerfed.
Running on 2x 3090, 500-1000tok/s prefill and 60tok/s output at Q6_K_XL with MTP on llama.cpp, 220k tokens context window (starts to get a bit dumb above 160k ish), no KV quantization
For this reason I wonder if local models are a potential business opportunity. Provide the service to engineering teams to give them a pre-built and setup GPU rig they can run in a closet. No need to worry about all the things you mentioned and clients can rest-assured their data isn't disappearing into a sketchy data center. There might be regulatory reasons that make on-prem setups appealing as well.
If this mattered to them, they wouldn't be running so much in the cloud or in proprietary software that they have no ability to air-gap.
If companies ever cared about this, Windows would not be dominant on the desktop.
As to why Windows is so dominant, I'm as clueless as you.
I wonder if that's because they don't know better or because of a lack of trust or costs?
[edited for format]
If open models can ever hold roughly 600k token windows, I'll be really excited, I found that around 300 ~ 400k of Claude reading through your codebase results in better outputs. I also have Claude read official docs instead of "guessing" as to how to do something.
I think deepseek v4 pro has 1m context and does pretty well up to around 600k. But if you have the hardware to run that locally, you already know
Even then if there's a smaller model with 1M context, you'll need a ton of RAM to actually run it at full 1M. I guess that's why you don't see it too much. Anyone that could run Qwen 3.6 27B with 1m context would be better off running a much bigger model with smaller context instead, in the same amount of VRAM.
In terms of optimizing further, huge context + KV quantization sounds like a terrible idea, but there's some decent innovation in sparse attention, KV cache rotation allowing Q8 to perform nearly as well as full 16-bit precision, plus some ideas around offloading KV cache to system RAM (but I'm skeptical)
I think the way these models work excludes sane behaviors the larger the context gets as each token introduces potential ambiguities between "USER" and "SYSTEM" messages leading to all the catastrophic behaviors.
Anyway, with AMD395+ I'm finding ~100k is both speed and context usefulness unless it's scoped tightly. with opencode, I manage it with dynamic context pruning: https://github.com/Opencode-DCP/opencode-dynamic-context-pru... ; then anything I touch ends up being refactored so context doesn't get bloated with unecessary functions, etc.
Obviously, this isn't compatible with certain business codebases, so I can see why bloat meets bloat.
AFAIUI, there'd be little advantage in having a higher speed inter-card connection, because the cards don't really talk to each other during inference. The loss of efficiency compared to a monolithic memory architecture comes from scheduling, not from data transfer.
OMG this is such an annoying property, just shut the hell up please, and be concise.
I suspect that this is an artifact of the thinking property, but please just summarize the thinking process far more concisely, where a single sentence answer is more than sufficient the frontier models seem devoted to going on to a minimum of 5 paragraphs and offering 3-5 new directions.
And requests to please only offer a single step at once, or single option at once, or to even stop eagerly offering future directions is really hard to prompt correctly.
And look, there I did exactly what I was complaining about...
For example, the Claude web UI has an Instructions field where I have told it never to congratulate or praise me for asking questions. Earlier Copilot models used a ridiculous number of emoji and bullet lists when answering literally every prompt, I told it to knock that off and prefer detailed paragraphs in prose.
Local agents/frameworks/whatever all have their equivalents for overall user preferences.
Asking Claude for this provides incorrect instructions for me, so I'm guessing it moves around a lot.
Edit: also, how can I stop the LLM from all this fake glazing, as if every question I have is some sort of unique genius insight, it's so damn annoying. I just got the third straight round of this while merely trying to get summarization of a PDF:
> Good question — it gets right at a real tension in the paper. Let me check the current state of actual SV-imputation efforts, since this has moved since 2020.
Hmm. I think I might just fundamentally disagree with Anthropic about the idea of what a "tool" should be.
> But re-reading the comment:
> "In the real world however, it does not. Hence, in the future we might fail this check even if it works within this limited check."
> The comment says "we might fail this check even if it works" — implying the original intent was to always fail (return 1) as a conservative stance, leaving room to tighten it later. The new code does the opposite of what the comment describes.
> So either:
> 1) The comment needs updating to reflect the new intent, or
> 2) The logic is wrong and should still return 1 unconditionally if the original intent was preserved.
> Which is it — did you intentionally want to succeed when X works, making the comment outdated? Or should the return 1 be restored?
> User: did you see the "in the future"?
> Yes, fair point — "in the future we might fail this check" is forward-looking, not a statement of current intent. The comment is saying the door is left open to tightening the check later, not that it should currently always fail. So the current code is correct and the comment still holds. All good.
___
It reads/comprehends 5% of what is on screen but acts like it knows it all, bossing you around. Why is it like this. What's wrong with Anthropic and what's wrong with people _not_ getting incredibly angry at that unearned smartass.
Also: more tokens.
(In fact, "that colleague" might have even been the source of the RLHF training set.)
This is likely due to a combination of mass funding for the AI companies, but also they are trying to governmentally restrict which countries get access to these cards so certain countries get a head start. The only way to lock that down is to have them literally locked in their own GPU prisons (data centers). Third reason is it does make it possible to train the models faster by having them in the same data center connected directly. Having them distributed to everyone would slow down training considerably.
The current way to 'own' decent RAM and GPUs right now is through the stock market it seems.
You can have web UI for PI!
I’d think the volume for that category would be low but LLMs aren’t just for coding.
Sure I could splash out a ton of money for a high ram Mac, but deepseek is so dirt cheap that I think depreciation on a high end machine costs more than my api spend.
Example of what I’m using it for: building a semantic database of podcast content (podcast discoverability sucks on an episode level). I need a cheap LLM, an embedder, a transcriber, none of which Claude will do.
My api costs for coding agents plus running apps are about ~$20/month, but I get more than just chat + Claude code.
If all I was doing was pumping an employers codebase through a coding agent, Claude would be the answer.
They are a lot faster, yes, but at least for my needs, they feel a lot dumber too.
It's a shame that the gemma4 that _would_ fit 24GB VRAM is MoE. :(
My Mac only has 16GB of VRAM (20GB total - 8 is reserved for the OS) so I have to leave room for VRAM, I usually find a model that fits in 5 to 7 GB of VRAM and then max the context window as much as I can.
sudo sysctl iogpu.wired_limit_mb=18800
will allow you to use more, but you do need to leave a bit for the OS obviously!
Works perfectly fine in llama.cpp throwing 70+t/s at me with 128k q8 K/V context when using the IQ4_NL quant + MTP at q4 MTP K/V.
Also leaving this here because you might find it useful: https://hypfer.github.io/will-it-fit-llama-cpp/
Crypto (to my knowledge at least) moved away from GPU mining. I guess you could maybe rent out GPU compute, but - being in germany - it's not worth the legal hassle. You could of course always commit tax fraud, though I wouldn't recommend that.
Massive legal liability. Not worth it.
edit: nvm, I'm confusing models.
FWIW Codex/GPT models are way less this way. Maybe to a fault.
I'm setting up my DGX Spark to try Qwen 3.6 27B again, as I'm hearing a lot of good reviews. When I tried it some time ago it was still early for support in llama.cpp.
[0] https://twelvetables.blog/comparing-claude-fable-5s-system-p...
It won't happen with AI models either.
It's almost ingrained in the American business model now. Outsource everything. Nobody wants to manage a room full of servers when they can spend 2-3x as much and outsource that headache along with the responsibility for it.
Same will happen with AI. Whether that means paying Anthropic that premium or paying AWS.
I'm in a relatively small business, we recently had an outage related to our local infrastructure.
I got pressure from the CEO saying it wasn't reliable to host our own infrastructure anymore even though our total internal down time over the last 5 years is significantly less than even a single of the larger recent AWS outages.
Everyone wants to shuck the chore and the responsibility.
AI is different.
Cloud computing genuinely is cheaper on average. It's better than paying for cisco servers, and at scale, it's cheaper than managed platforms (ala Heroku), and it's a coin toss for when you're in the middle ground and constantly approaching the point of rebuilding poor-man versions of existing products but with very very expensive engineering salaries.
In contrast, local models offer dramatic savings, and are magnitude of orders better in certain aspects: like stability - the performance is all over the place with traditional AI companies as they divert compute to their next big thing.
The benefits to maintaining your own infrastructure are pretty moderate to low, with very high risk.
And also, alternate models are pretty easy to use and easy to swap out unlike the vendor lock-in that exists with cloud services.
I agree. The other thing here is that, once you can run LLMs on a single piece of commodity hardware (whether that includes one GPU or several), the difference between cloud vs. on-premise LLMs will largely be about where your hardware is located. There will be very little software configuration involved (just an HTTP endpoint that talks to the GPU). This is decidedly different from cloud products where the moat of hyperscalers is largely in the software and services on top of the hardware, not the hardware itself. (Sure, GPUs will eventually break & need replacement, too, but there's no state to lose, so that's already orders of magnitude easier than replacing hard drives.)
For some applications, sure. Availability is a large part of what one is paying for with cloud computing, but it's also something that not every business needs.
If you sacrifice availability and have a pure-compute use case (low durability requirements), on-prem can quickly end up cheaper for far better hardware.
With AI, no, you can't . model needs plain text to be able to work. If somebody will be able to figure out models with asymmetric keys will make a lot of money.
Same reason people pay for things through the AWS marketplace (like Vanta) instead of having to go through their invoicing process.
Renting a GPU server from a cloud and hosting your own llama.cpp is the path of least resistance.
But AI is just weights, you can run a reasonably intelligent model at home, or on a few GPUs if you're a small-medium sized company, and it doesn't require dedicated maintenance.
Same here. My job as a software dev does not require me to self-host services we need and use. Quite the opposite. But, I am reluctant to hand over all control to AWS or equivalent for several reasons that I will get into here.
I have found that Infrastructure as Code (IaC) and modern tools like opentofu, ansible, combined with frontier AI models and harnesses gives you superpowers in this space. Almost all of our self-hosted services are fully managed by these tools. e.g. We perform backups and test them more often now than we ever did before. Entirely because it is so much easier to do all of that now.
AI is definitely different. Cloud compute is incredibly convenient to the point where even if AWS is more expensive it's just so _nice_. LLM models are much more abstract and while I can't easily swap AWS for Hetzner to save 80% of my costs I can absolutely get close to that for many of LLM tasks, even today.
I suspect Anthropic and gang all know that that's why they are buying up dev tools and shifting towards long-running agents because that's where they can get AWS's "nicesness" that they can charge for.
And once the servers are in space, everything is fully out there.
Do these apply to AI?
The OS needs updates, file systems get corrupted.
Fans get dirty.
All the things that you need to deal with in hosting your own server infrastructure you have to deal with when hosting your own AI infrastructure (which runs on servers...)
A lot of the reason people outsource normal software is its brittle security properties, not sure that even applies to an LLM - it can go and look up the latest security best practices just like an engineer can.
Which gives all the power to the big techs. I'll never understand why the average company seems to have no problem with this.
There's a reason most people pay other people to do these things for them.
I can see how it makes sense for companies, because money is "only money" but an ongoing operational distraction can be much more costly, as in, it can be detrimental to the success of the overall business.
AI company valuations won't survive if they're only for the "American business model".
You know what gives me headaches? When I'm in the middle of a session and the model gets rug-pulled out from under me because somebody at the model provider didn't pay the Trump bill that month.
Or when someone at the model provider decides that the curve-fitting algorithm in my graphics package looks a little too much like Skynet for comfort.
Or when they do any number of other things to undermine my work for the sake of their business model, some of which I won't even notice until the damage is done.
The sad thing is, if you know how inference works, you know that it really is insanely wasteful for everybody to run it locally. If anything naturally belongs in the cloud, it's inference. But at the same time, what choice are we being given?
Obviously that's not how it really works in practice, but the point is, if you are only running one prompt at a time, each weight gets fetched, applied to the token being processed, and then never touched again until the next token is processed.
So when you submit a prompt to a model that's running a bunch of other peoples' contexts concurrently, it can reuse each weight multiple times before moving on to the next one:
The same is true in an agent-heavy scenario where you have several contexts in play at once.Worst case, in terms of energy efficiency, is a single user sitting around waiting for a single response. I don't feel like I'm explaining it well, but the core idea is that every time a weight is fetched from memory, you want to get as much work done as possible with it.
I think that's basically Geohot's business model at Tiny Corp.
Nothing stopping turnkey OSS AI hardware being productised, including niceties like opt-in automated updates. If the trend continues of models becoming smaller and more capable for everyday use, it also derisks against obsolescence.
Everybody owns a car, washer, TV, etc today. Maybe one could finance a server-box/trailer costing $20k, trade it in every 7 years for a newer model, etc. Many people are going to own a $20k Optimus.
If things change to token usage billing for everyone, maybe I'll be singing a different tune but on a subscription, I don't think it makes sense financially.
Fun? Yes. Financially sound? No.
What's interesting/exciting is that local models are _already_ quite good at tasks we never imagined AI _ever_ doing before ChatGPT hit the scene just a few short years ago.
We're also in an interesting point in time where companies are releasing the fruits of their research/labor (the LLMs) to the general public for free. For now, I think they see it in their best interest to gain mindshare and rapport, as well as advancing the state of the art in smaller LLMs ("a rising tide lifts all boats") but I fear and expect that these will dry up as the major players buy the minor players, and all will seek a return on their considerable investments in AI research.
That's what I mean by diminishing returns.
True, but this difference _should_ shrink with the hardware craze and we're able to buy memory (the biggest bottleneck at the moment) again, shouldn't it?
We have set up something where you create a ticket, Make sure it contains enough information, and with the right tag added it will make a branch with PR for you which stays up to date based on updates to the ticket and comments on the PR.
It’s creepy in a way. But you also can’t really use local (as in workstation LLM) for that. Sure we could run something like a distributed task scheduler across all our engineer devices but just pushing it to copilot is easier.
And those are going to all be big enterprise companies that probably will set up LLM services entirely in-house, because they've got the headcount to utilize servers at 100%.
I wonder if there will be (or is currently) business in selling their compute while they're not working, to opposite time zones, etc.
What's left for the big providers will be the dregs of individual subscriptions and small businesses that at their least paranoid might let employees just use their own subscriptions for work.
The other question is how the middle ground (hetzner etc) is shaping up, because obviously so many orgs won't want to run servers.
Accountants are reasonably good at figuring this out - there are a lot of different things that need a large upfront investment before you can charge anything. People still debate if they are correct in this each case.
https://www.reddit.com/r/LocalLLaMA/s/YontVNVRbL
Imo the more interesting thing to focus on is that there are now several more labs with the expertise and capabilities to train trillion parameter models. That's a serious technical accomplishment and the main reason why open models are catching up to Anthropic and OpenAI (and local models are typically distillations of much larger models).
Who cares that they got some small amount of training data out of Claude. The crux is that the big US labs are not special, they just have a first mover advantage that's slowly shrinking as incremental progress becomes harder.
so long as there's no algorithm breakthrough
In a way, it's absolutely amazing that we've went from "Playing 'Set a Timer' on Apple Music" intelligence to something that may pass the Turing Test, but in practical terms the small models are still far from what I'd call "good" for more than a tech demo.
To me, 7B models are just a fuzzy echo of Wikipedia. Gemma models at 4 bit are too clumsy to even reliably generate JSON for tool calls or copy a line of code to apply a patch.
Qwen needs so much detail and babysitting to stop it from doom looping or losing the plot, that the instructions that I need to give are usually longer than the code I end up keeping.
Is there some magic prompt that I don't know? Do other people just have a lot more patience, or way lower expectations?
qwen/gemma in the 27/35B range @fp8 are better than gemini-2.5, but less than gemini-3.1, you can run DS4-flash @fp8 on two DGX spark, and things keep becoming better. DiffusionGemma came out recently with 4x token gen speeds.
tl;dr - the models you appear to be trying with are too small or too quant'd
We aren’t wealthy enough to have the hardware that would make this good.
The people who have the money to buy a spare maxed out Mac mini just don’t get it. I see lots of folks with RTX 6000’s in threads like these. Or any RTX card that ends in “90”.
Cloud AI is what allows the proles to participate in the broader AI conversation, but not these AI conversations.
Google (of all companies!) demonstrated you can get useful stuff with reasonable performance with model running local on their smartphones.
Depending on your expecations you can get the local models running on a recent enough laptop, you just need 16GB of ram to be comfortable. It certainly exceeded my expectations (but i don't use the LLM to write code, only to do the real boring stuff: docs.)
Why do you say 'may'? Just curious. Surely you've got something
But, for smaller more well-defined workflows, or as straight "edit this part to be like this exact" edits, they seem more than enough. Still waiting for them to become mature enough to be able to replace what we have as SOTA today, I'd say it's ready to be switched over then.
Speaking of local models, DiffusionGemma (and diffusion models in general) should not be slept on for local usage! Usually the problem locally is that the LLMs aren't efficiently making use of your hardware, unless you start batching requests and run many at the same time, but that require different approaches in general. Instead, diffusion models work much faster for individual prompts, and not by a small margin either.
Today I finally finished porting diffusiongemma-26B-A4B-it support from Transformers into Candle, and together with some optimizations I now have it basically flying with ~450 tok/s (~19 it/s) in Candle during inference, instead of ~180 tok/s (~11 it/s) from HF's Transformers library. Even using vLLM with similar sized LLMs, I don't think I've ever gotten past the ~250 tok/s threshold for single prompts, exciting stuff for local models :)
Diffusion models can't really be trained beyond low-to-mid size and have lower quality than an equally sized, plain one-token-at-a-time model.
I think people used to say the same about the 8B text-diffusion models too when they came out, like LLaDA. LLaDA2.0 seemingly claims 100B total / 6.1B active MoE diffusion (DiffusionGemma is also MoE). Not saying you're wrong about the current consensus, but it has a way of changing over time, might be a bit early to claim it's infeasible to scale them, especially considering the final artifact being much more suitable for local usage.
- consistently proven behind their auto-regressive counterparts in quality. Look at the dgemma benchmarks - pretty steep dropoffs and the more difficult the benchmark the worse the dropoff. That's not a good look and it's not like its some artifact of google's release. Every dllm is like this.
- And whose inference benefits are negated at scale. Transformers are still cheaper if you want to serve lots of users.
>"DiffusionGemma's speedup is designed for local and low-concurrency inference. In high-QPS cloud serving, autoregressive models can be deployed to saturate compute efficiently, so DiffusionGemma's parallel decoding offers diminishing returns and can result in higher serving costs"
Put yourself in the shoes of all the labs, even open source ones. Why would you put much effort into this ?
But my entire point is about the reverse of this, the context of what I bring up is in single-user scenarios, which is where these diffusion models really make a large difference in performance.
Sure, I agree it's not a good fit for every single use case out there, everywhere. But after starting to play around with it closer myself, I think people are dismissing it a bit too quickly, at least if you're interested in running local models on your own hardware.
Since training models is currently a very expensive procedure, diffusion llms are destined to be relegated to the occasional research artifact at best. As things stand, making a serious commitment to them is basically the equivalent of throwing money into a fire pit and things are expensive enough as is.
Alternate Architectures that do a much better job matching transformers in quality have basically gone nowhere but you expect one that is basically worse in every way the labs care about won't ? I'm not trying to 'dismiss' dllms. I'm interested in them for the same reason you are. I'm just stating the factors at play plainly.
Most other trades need to invest significantly in tools. If you want good tooling, you really want 64GB of GPU memory (e.g. 2x 5090) and 96GB of RAM. If I'm paying $200k for an expert engineer then $50k every other year for tooling seems pretty reasonable.
It would've been easy to spend $5k on Fable in the short week it was available. If that's the direction things are going (we can assume GPT-6 to be if similar class) $5k's not going to get you "best frontier models at effectively unlimited usage".
A 16C Ryzen 128GB with 96GB Blackwell is ~US$16k, quite reasonable for a worker billed at $300k. In fact so reasonable it's worth having AI enabled backend for lots of things.
The 27B is the smarter, more reliable one - but it is slower. The 35B is faster, still very smart but below 27B, a bit less reliable. The reason is the MoE - Mixture of Experts architecture, which only activates a subset of parameters, making the model much much faster.
I run the 27B on a MacBook Pro M5 Max + 40 GPU cores + 128GB RAM (well, on this beast I can have 27B + 35B in memory at the same time with headroom for all the other stuff). But because this is a laptop, it is not possible to run local LLMs all the time - it just gets too hot and too loud.
What excites me more: I run the 35B model on a MacMini M4 with 64GB RAM. It is fast, it gets a lot of work done (e.g. it scans, extracts and classifies my emails, it watches the mailbox all the time and does work). I also use it as my private Hermes assistant ("when is the next Starship launch?", "who is playing today at the World Cup? Give me some trivia").
Next step I am planning is a RTX Pro 6000 Blackwell workstation I can put in my basement. I want to run qwen really fast, with multiple threads / prompts / agents at once. And MAYBE if the budget allows, a 2x RTX Pro 6000 setup in order to run DeepSeek v4 flash on it (to run research on it).
They all give slightly different results, you can dedup / fusion with heuristics / another agent
Also, it will just be faster - and more fun too.
But also because it's likely to hold most of its value into the next few years, based on the looks of things, too
The beauty of it is that Hermes itself has a cron too - every 4h Hermes will wake up and check if the email ingestion is working fine. If not, it will fix it. Funnily this is one of the most robust setups I've seen in a while, it is like having your own little DevOps waking up at night, fixing the infra when needed.
I posted this yesterday https://github.com/day50-dev/petsitter
I use it with https://github.com/day50-dev/simple-llm-cli
And modify the "tricks" until my evals get to good numbers. It's a model by model basis.
This is what the larger firms are doing - they have custom prompts per model
I haven't include more sophisticated ones because they are complicated and I wanted to avoid the friction
I don't vibe-code, but I do decide what to implement and what patterns to use (perhaps asking the model to analyze and give advice on this first), then I have it handle the nitty-gritty of the implementation itself. For this usage style, the latest local models are as good as having Claude at home.
I won't say it's been _easy_ (I ended up implementing my own harness to accommodate the idiosyncrasies of local models), but I will say that for the effort, having a coding agent that's essentially free to query as much as I want has been life-changing as a dev, especially when it comes to working on side projects. Knowing that my agent will never get worse in quality, suddenly cost more than it does now, or be suddenly made unavailable by external factors, was absolutely worth the trouble. And on top of all that, I can't believe it's as good as it is.
The other thing that people tend to gloss over is that you really do need to spend some $$$ on decent hardware. Yeah, you CAN run some 4-bit quant with heavily quantized cache on your 16GB card, but it's not going to be a great experience (I think this is where a lot of the "if you think it's gonna be any good, you're going to be disappointed" stuff comes from). Yes it's a lot of $$$ upfront but it's very much unknown when hardware prices are going to come back to reality. There's a lot of hopes and dreams that any minute now an H100 will be worth pennies because "that's how it's always been" w.r.t. computer hardware, but we are living in interesting times. So you can't just make the tired old assumptions that a Claude subscription over three years time will work out to be dramatically less than the value of some card three years from now. We STILL have basically anything with >=24GB VRAM appreciating in value, which is absolutely wild. What I'm saying is, the depreciation curve may very well be a lot less dramatic and fast than it used to be, going forward.
Edit: Obviously you'll be using more tokens but this is the trade off for running a smaller model and running locally. Similar to time memory trade off but in token economics. Sorry I need more coffee
You can be far more ambiguous with your tasks with the larger proprietary models as opposed to the local models. You can achieve the similar results with local models but you need to be much more detailed in your prompt.
One of the biggest things about running these local models is that the harness matters almost just as much as the model too. Codex is optimized for GPT models, CC is optimized for Claude, Cursor has a great harness that works very well across these providers. It took me a couple of iterations of the different harnesses to find one that would work well with the smaller Qwen models to do local coding.
If you're resourceful, you can even run SOTA models. KimiK2.7, MiMo-V2.5/V2.5-Pro, MiniMax2.5/2.7/3, DeepSeekV3.1/v3.2/V4-Flash/V4Pro, GLM5.1, Step3.7-Flash, Qwen3.5-397B, Qwen3.5-122B, gpt-oss-120B
do you find Qwen3.5-122B to be SOTA-level? I moved from it to Qwen3.6-27B (both Q8), and I prefer 3.6-27B, and it leaves me room to spare for other small models
There’s a lot of things we could use even quite small models for, which would not need an insane amount of computing power and memory, but too few of us is really researching them.
It is quite astonishing to see how far local models have progressed, and I think that if you enjoy tinkering a bit, you can save a good bit of money (if you happen to have the hardware lying around anyways). Overall it’s still hard to beat the the cost/convenience combination of a cloud based model provider though.
[0] https://deepclause.substack.com/p/how-to-make-small-models-p...
The cloud-based models are fine for big and complex tasks, but the pricing is ridiculous for small stuff—like summarizing a discussion or fixing a small bug. And cloud and privacy have never been a good match.
As an example, this comment itself was written with the help of Qwen3.5-4B running locally with an extension on top of llama.cpp default web UI [1]. The extension injects my browser's context directly into the conversation, which allows me to summarize things and draft up comments quickly. Speed is pretty acceptable for the size: ~5s TTFT and ~100 t/s generation, all running on a Macbook M5.
And when I want to run bigger tasks, I don't just stick to one provider. Apart from well-known closed-weight providers like OpenAI or Anthropic, I also experiment with open-weight models like GLM-5.1, DeepSeek V4, and Qwen3.6-27B, which provide quite good results for the price.
I'd argue both have value, and I don't see why anyone needs to choose one exclusively. Anyone else doing this?
[1]: https://github.com/ngxson/llama-companion
Also, a lot of my day-to-day tasks perform the same on both small and bigger models: summarize a web page, draft a response, translations, quick web search, etc.
I'm assuming privacy is not a concern since you mentioned using Deepseek already. The cost of V4 Flash for small tasks is so minuscule as to be almost free, and you don't have to deal with a churning laptop (or even buying a high-end laptop, for someone who doesn't already have one).
I guess what I'm really asking is, what's the advantage of using these small local models if privacy isn't a concern?
Depending on use cases, but for me I found 2 use cases where a local model is a must and not optional:
- Running offline without internet access: for example, I have this project that allow transcribe and summarize audio in real time. I already used it in some events where wifi is not available: https://github.com/ngxson/llama.cpp-realtime-audio-recap
- Handle private personal data, for example health records. This is the same category of "privacy" that you mentioned, but I just want to bring up the fact that people value their privacy differently.
Huggingface's little parameter count badge seems unreliable.
But for coding in a harness? In my experience it's unusable even for small projects. It just gets hard stuck at every little problem, wasting hundreds of thousands of tokens trying to make a convoluted solution work instead of doing the obvious thing. Or it will spend hours trying to reason through a fairly simple code flow, incrementally adding debug print statements, only to get confused by the output and then editing completely unrelated code that it convinced itself is the problem.
I've tried instead giving Sonnet the problem description and code and have it come up with a detailed plan that Qwen should implement, but doing that actually consumes a significant amount of tokens compared to just telling it to implement everything, and the results are honestly not that much better. There are just too often subtle issues with the plan that Qwen doesn't recognize when implementing, but make the resulting solution it comes up with unusable.
LOL - some of us have a budget
If you're a professional that's confident in a positive return on the investment (optimal or not), or just a hobbyist with the luxury budget for a "shop" that cost is well within norms.
That's not everybody, of course, but it's not some inconceivable fantasy. A lot of people in the tech community here on HN, specifically, end up with pretty high discretionary budgets that they pour into stuff like this.
Most hobbyists and many professionals could end up far ahead financially by leveraging makerspaces, tool rentals, and co-op shops or even by hiring out a professional to prep certain intermediates for them, but they get psychological value -- as well as flexibility, reliability, and resale opportunity -- from having their own well-outfitted shop.
And they can afford that premium, so they do. At the scale of individuals and small shops, not everything that matters gets captured in financial models.
Aside, physical tools tend to be financially advantageous to own if you're going to use them a lot. Even if the owner were targeting 0 profit, they'd have to charge more to factor in the cost of dealing with customers and increased risk of wear/damage by users who don't care as much.
Most come with huge privacy concerns, total costs and availability are impossible to forecast very far out, and the specific behavior of frontier models in particular is not something anybody can rely on as those are subscription products that are subject behavior on their publisher's whims (whether from changing system prompts, new "safeguards", retired models, forced "updates", new regulations, etc).
It's quite hard to put a price on all that, and as more people find local models productive enough or develop curiosity to explore models, training, or harness-crafting in their own ways, the marginal cost of buying some shop hardware just sort of disappears into the budget noise for plenty enough people.
Still cheaper than a new Mac. Maybe not cheaper than a used one.
Top 10% of global earners (~800M people) can afford a $2,000 device without major financial strain.
Top 25% (~2B people) could afford it with some budget adjustments.
Bottom 50% (~4B people) would find it prohibitively expensive.
So for a SV top income, maybe that might look more like the weekly pet brushing budget, but for most people out there this is not that much of a no-brainer.
Besides those with effectively unlimited budgets for their personal compute, local models are still a long ways off.
Though, that shouldn't be conflated with the value of open-source models, which can be used by cloud providers to significantly reduce cost of intelligence.
There are segments, everything from "Average person in world" to "Average creative professional using computers for work" and more on HN, with a wide range of costs for the hardware. HN probably skews towards the latter rather than the former, probably sitting with enterprise hardware next to them basically for fun, hard to make wider conclusions from what people here have or not.
It's just for gaming and AI now. Maybe not even gaming as much anymore.
Consider the perspective of someone who has a practically unlimited budget for PCs, doesn't game much anymore, and doesn't need AI to do their job. It's just part of getting older, and there are plenty of people in their late 30s and older on here.
Specs: qwen3_17b_base.Q6_K.gguf selora-v047-answer.f16.gguf selora-v047-automation.f16.gguf selora-v047-clarification.f16.gguf selora-v047-command.f16.gguf
The full base model and LoRA adapters are only 3.5GB
Capabilities include configuring for smart home setup to help with answers, clarifications, commands, and creating automations in Home Assistant. The models with the LoRA adapters were made with lean scripted data made specifically for Home Assistant. A lot of work was put into this, feel free to give it a try and happy for any feedback!
https://huggingface.co/selorahomes/Selora-AI
These models are very capable, and use around 20-30GB of RAM while they are running.
Provided you have 64GB of RAM that leaves space for running other applications at the same time.
I used to assume that anything GPT-4 equivalent or higher would need $30,000+ of server-class hardware.
That said... gemma-4-12b-qat is 7.15GB on disk so should run reasonably well in 16GB, that takes it down to MacBook Air territory https://lmstudio.ai/models/google/gemma-4-12b-qat
How does that work? The script in the post references the file "docker-compose.sandbox.yml", but I don't anything about what that file does.
The post that this one links to, that it's based on, says that Pi doesn't do proper sandboxing.
Presumably bash can still execute other binaries, otherwise it would be fairly useless. What stops it from executing Python? Or opening a network connection and downloading Python?
ROCm stack is not for people though who aren’t willing to dig in and patch things themselves.
I really wonder when companies will start hosting theire model for everday tasks on prem, cause its good enough (and realative cheap), instead of paying subscriptions for all devs.
Currently maxing out two Claude code accounts every x hours when working on large code migrations or setting up new iOS apps etc - most of time it’s fine but occasionally it’s mega frustrating!
With 96GB I'd start with the Gemma 4 and Qwen 3.6 models. Any of those should work fine.
Claude code supports this by setting the model to "opusplan"- it will automatically use Opus for planning and sonnet for implementation. This was completely necessary with the fable release. I was able to do this with fable and it was necessary to avoid getting quickly rate limited. In settings.json:
"env": { "ANTHROPIC_DEFAULT_OPUS_MODEL": "claude-fable-5" },
Obviously have that set to "claude-opus-4-8" now.
In theory, other countries should be able to replicate that effort and improve it.
The most "affordable" option is red v2 with 64GB GPU ram and costs $12,000. This is only ("only") 1.5x-3x the price of a beefy desktop (https://pcpartpicker.com/builds/), and could crush inference work even on bigger models. It could support coding tasks for a small team of developers, or run an AI agent for every person in your household...
If you have $12K to spend, you may be better off with DGX Spark or a Mac with 128GB VRAM. That can (barely) fit DeepSeek V4 Flash.
In an ideal world, yea you can run local models, but I need a powerful always on device for that, or the latest gear, and it will never be as fast as what I can use from google, anthropic, or through an API call. I really wish it was different but I have to shell out a ton of money for that, and I guess it's usecase specific right. Maybe if my phone was super powerful and could run models that would be great, but then I have this issue with cloud sync and using things anywhere else. There will be a world in which local models and self deployed models make sense, this is going to be a core experience, but I personally can't run them.
The good news might be: opensource models are now good (enough) for day2day usage. But is it really? I feel that companies will always naturally strive for the best and use the SOTA (as long it is not too expensive).
I see OSS models being a good backbone for companies in the future that have validated workflows and could use those for privacy or to spare costs.
IDK, might have gone a little bit off-topic here.
Running the same prompt on both with the same .md memory state...
Gemini3.5 is more "intelligent" but Antigravity gets it to decide to go on tangents that are quite time and token-consuming I think. Nice casino machine.
Pi+Qwen3 (~80GB, llama.cpp) is like vibecoding about 1.5 years ago, when you had to babysit, structure your program to have self-contained chunks, and keep an eye on all the cross-cutting concerns to not trip it up. When it works it works fine and when it fails it's my job to ensure it fails fast.
The code is about 10'000 lines of Kotlin in total so it already takes some effort to keep it simple for the AI. It's not a slopped quantity of code, i got solid feature creep :^)
https://play.google.com/store/apps/details?id=com.sixteenam.... ...hat tip to the recent copycat squatter btw it's an honor!
1. Memory bandwidth
2. VRAM size, which limits the size of a model you can use effectively. Yes you can swap but then you're taking a performance hit;
3. Raw FLOPS, including quantization.
Apple here is interesting because they have a shared memory model and you can buy Macs currently with up to 128GB of RAM (previously 256/612GB on Mac Studios, both discontinued). New M5 Mac Studios are expected in Q3 but that's not guaranteed. It may take until next year
Depending on the chip, Macs top out at ~900GB/s. A 5090 or 6000 Pro has 1800GB/s. A B100 is at like 3.2TB/s. A 5090 has, depending on how you count, 5-7x the FLOPS of a M5 Pro so a 5090 is still better than any current Max... except for the 32GB limit.
NVidia aggressively segment the market by limiting VRAM. The RTX 6000 Pro is basically a 5090 with slightly more CUDA cores and 96GB of VRAM instead of 32GB for $10-11k instead of $3k.
So let's project this into the future a little. The M6 Ultra/Max may well be 1TB+/s memory bandwidth with much higher FLOPS and thus actually be competitive for larger models. A 6090 in the current market will probably still have 32GB of VRAM if I had to guess. Maybe it goes up to 48GB.
But anyway I think we're only 2-3 years away from sub-$5000 hardware that does 100-300+tok/s on models larger than 31B. And that's going to be a game changer.
You do need to use sutable hardware.
I get 50tok/s from Qwen 3.6 27b with Q8 & MTP (I can get more aggregate tok/s in parallel rather than using MOE, but don't have enough memory for too many full sized contexts) and 100 tok/s with 35B-A3b Q8 (no MTP as it's not that useful with MOE) on a single workstation gpu that I spent 3k on a couple years ago.
These speeds are somewhat faster than what I've seen from commercial SOTA models, they're plenty fast for many applications.
What is true is that it gets easier and faster to run local models. With QAT (quantization aware training), turboquant (or similar) K/V compression; what used to be impossible to run is now fairly easy.
I can run gemma4:26b-a4b-qat on my laptop with 20-30 tokens/s with a 256k context window. That was unthinkable just 6 months ago.
So the local models are "OK" for small'ish projects.
But it does not at all(!) compare to the frontier models. For a large project Claude's Opus 4.6+ just work, whereas local gemma tangles itself up, makes weird mistakes, and just can't handle it (for those cases it is faster if I do it myself).
If the trends continues, with 1.58bit QAT models, even better K/V compression, faster multi-token prediction et al, maybe soon it will be comparable.
To be fair, I think the labs are also interested in this (e.g OpenAI parameter golf). But the incentives are tricky. When the subsidies and tokenmaxxing era ends, local models will be essential.
It really is better than I would expect it to be. But it requires a special treatment. Since the model is smaller it needs a smaller and simpler tasks. I use smarter model to decompose the task into primitive subtasks, write good description, submit to worker with qwen3.6, review completion and create new task to fix if required (20% of cases). This workflow works fine.
> 64 GB RAM and 1TB storage
Ah ok, not something regular joe and jane happen to have lying around at home.
Additionally the whole configuration is still very much low level, bunch of CLI commands, and if the model doesn't fit for the task at hand, it starts allucinating, generating gibberish, whatever.
His program uses quantization, but is very optimised and has builds that can fit into 96GB of memory with great results.
DS4 Flash is usually my go-to for a lot of things these days, and I don't have to worry about a cloud model stopping or telling me it's concerned about my usage.
Most of those models are also available via Openrouter and many other platforms. Dirt cheap, and much faster than on consumer GPUs. Perfect to try and compare the different options.
However, like many commenters, I don't really believe in vibe-coding, long-horizon agentic one-shot agentic coding, etc. and do not use LLMs for huge generation tasks that involve designing things end-to-end.
I also have an MBP with 128 GB of unified memory and do quite a bit of Qwen3.6-35B-A3B. No, it's not as smart as the aforementioned models, to say nothing of frontier, but many people seem pleasantly shocked by the number of banal tasks that do not require these.
In fact with a 64GB mac, you can run pretty much all of the latest Qwen models.
Also, anyone who has been following local LLM are well aware that the quality and performance has become way way better since Qwen3.5
Is there any truth to this claim? LM Studio uses llama.cpp to run the models. I guess the overhead of LM Studio should be minimal.
After all LM Studio is a really easy way to host models, are there really major drawbacks?
The good old butt dyno!
I’ve been eyeing local models more and more with Anthropic squeezing more and more on the subscriptions. A few comments on HN had me waiting until they improved more but this article makes me wonder if I should reconsider that.
I’ve been doing some pretty niche development using a game and a script extender for said game. If these models can handle that, I’d feel good about switching.
Plenty fast for coding work and for sharing with my OpenClaw setup.
Currently in the process of adding another external GPU (RTX 4090 with pipeline parallelism) via thunderbolt 5 to the Olares One box, for higher quantization, possibly 8-bit, larger context, better concurrency, more kv cache.
Having a local Qwen check another Qwen's work increases the accuracy quite a bit at the cost of more latency. You can't have your cake and eat it too.
In benchmarking local models, I'm having success increasing even a 9B qwen's score on terminal-bench adjacent problems, just by asking it to plan and handing the plan back to qwen with a fresh context. Try it with Qwen3.5, unsloth Q4+, and a thinking budget of around 1024 tokens.
> Because AI generates pixels based on visual patterns rather than mathematical geometry, it creates the illusion of a sewing pattern without any of the functional blueprints required to actually drape and construct a real garment.
If you want the illusion of a meaningful research question then sure, local models will give you that.
Gemma 4 and Qwen3.6 27B aren't perfect, yet they are such a step forward from the previous generation that it's both feasible to get stuff done locally with patience and very likely that future releases will subvert cloud capabilities entirely.
Plus, they have definite reliability advantages over cloud models that can be wiped out by a government order or lobotomized to handle traffic surges.
One caveat, I have absolutely no patience for a lot of subagent systems, like opencode, where the subagent is walled off and incommunicatable. My subagents really should be their own session, that i can deal with as I please, with some MessageChannel like offerings/tools available to them. Ideally with modes where messages auto-flow in and out, and modes where I can be a gate-monitor. https://developer.mozilla.org/en-US/docs/Web/API/MessageChan...
Not really super related but MCP has been working on Events for a while. That ability to respond fast would be great. https://github.com/modelcontextprotocol/experimental-ext-tri...
Asking local to be fast feels like an obvious folly, but given how much better small models have got, and seeing these models tune themselves for speed: I want to hope!
> “Our goal is to deliver unmetered intelligence to every home and every desk with Windows,” said Satya Nadella, chairman and CEO of Microsoft. “RTX Spark marks a real breakthrough towards that vision.”
Makes me optimistic that those two companies are going to keep investing in quality local models.
I have been considering getting the 58gb Mac Mini but that is a decent amount of money to spend without confirmation on a) how fast is it and b) will it work for well-defined tasks.
I’d love it if model providers just let old models run and let us pay less, but the deprecation makes me want to look into local models.
Running locally is the bar; it's hard to make these things a service which scales.
I'd assume a Mac with 32-64GB memory would get some reasonable results.
After the recent changes to usage, I've spent an annoyingly long number of hours trying to get this to work.
I've often wondered why the hype around apple neural core when 99% of software doesn't use them.
https://github.com/ml-explore/mlx-lm
Having used half the systems that Vicki mentioned, mlx was the best balance between power and ease of use. Just a pip install away.
Make some tests, and its 8 bit version runs at 30tok/s when using llama.cpp with MTP and run on Macbook Max M5. I have 128 GB, but but 64 GB is well enough. https://github.com/stared/benching-local-llms-on-apple-silic...
When using benchmarks, it gives more-or-less the level of SotA mid-late 2025.
Does it really needs a GPU at 300Watts to do all that tasks?
Also the R9700 rocm is 32gb, 1350, available now. It's like 1/3 the price of what 5090s go for and you can get the slimmer models for that price so you can pack more in.
If I had to build right this second I'd do small form factor strix halo with a Radeon card.
You can get all those parts in like 3 days, msrp, no hassles. the only thing you're paying out the nose for is the ran
Good news is mobo manufacturers are adding more slots so you don't have to get robbed paying for 32 or 64gb modules
I wouldn't rely on it for large stuff like codex though. I haven't tried out deepseek/kimi, if we could run those locally it would be great.
I closed the article after that.
The author has no idea what a privilege it is to have a machine like that for personal use, and how 99% of the population are not going to afford a setup like that.
Just some back-of-the-envelope maths will tell you that a $20/month Claude subscription makes much more sense financially.
What % of developers could afford an older MacBook model, second hand? Far, far more than 1%.
Or are you just being glib because you’ve got a misplaced superiority complex?
They're overpriced toys. Too little CPU, too little GPU, too little RAM, and what RAM you do have has too little memory bandwidth to serve both the CPU and GPU at the same time (which still hasn't been fixed for the newest M series CPUs: the GPU can still starve the CPU out, they still do not share bandwidth correctly).
And since this is about local inference: dealing with Metal sucks, and dealing with the NPU sucks. NPUs are nightmares to infer with because you're always stuck using models quantized for them exclusively, which often means poorly quantized models (such as giving up mixed quant models, and burning your finite RAM just to keep the model from going insane).
Not only that, they can't meaningfully run Linux, so they have no life after the desktop, they just become e-waste.
Hell, even if I held one hand behind my back and _only_ looked at unified RAM machines, Apple doesn't currently sell an M5 Mac Studio, and the MBP M5 /w 128GB of RAM starts at $5.4k, and presumably, the M5 Mac Studio will cost roughly the same.
I can buy the overpriced Framework Workstation with a better CPU, a better GPU, and can run Linux or Windows and that starts at $3.5k.
Or I can just not be a dumb shit and build an inference rig with a 9800x3D, however much normal RAM I want (48 or 64GB is enough here), and then drop two 9060XTs (16GB, $500 each) in there, or two W9700 in there (9070XT /w 32GB, $1100 each), or a single 5090 ($2k, but only 32GB, the worst option of the three), and infer several times faster than all the above options while spending less money.
Inference requires two important things Apple either can't do, or can't do cheaply: RAM bandwidth and RAM amount.
I am pretty sure even among software engineers, much fewer than 1% are going to spend their money on that.
Most software engineers know how to spend their money responsibly.
> could or will? much fewer than 1% are going to spend their money on that.
It’s ok to change your point, you don’t need to get combative.
Not that it makes any difference, given their ~10% market share.
Larger models just do more complex reasoning. But if you want them to be really good, you need a beefy Mac. They have the best combination of memory bandwidth and RAM to allow medium-sized models to run at speed. GPUs have less memory but more bandwidth, and AMD iGPUs have more memory but less bandwidth. The Mac is the best compromise on the market today.
Once you do have a beefy Mac, you want to run a dense model. This gives you the best possible result with the system you have. You can go MoE for faster results, use cutting-edge inference techniques, parameter tweaks, etc. But a basic dense model (at Q6 quant) on a big-ass mac will serve 90% of your coding needs.
So i've tested a couple, and the speed is finally impressive. My colleague uses paid tiers of claude and GPT, and the speed is comparable. Maybe even slightly faster on my end.
The problem is: i'm running the model on my work laptop, a 12th gen i5 with 16GB of RAM (which, you know, i asked to upgrade to 64, but that was right at the time of the great RAM shortage of the '20s) so i'm pretty limited in what i can use. And this is running alongside the usual suspects: Web browser hugging 1.5GB, MPLABX hugging 3, windows taking at least 5 just to sit idle, thermal throttled to 1GHz ... And yet its speed is comparable to a paid service. A lunch's worth of tokens vs a few cents of power.
So, what i found, what i fount... What i found is that i need AT LEAST 16k of context window, otherwise they will halt when i pass a small C file for analysis. And coding models will shit the bed with 4k. But we all know that, context size is King.
I found out that Qwen will keep looping while thinking, but that's not a surprise to you, either. But give it enough time and you will get an useful answer. I was hoping to using it as a better warning system for some languages, but i fear i need muuuch more context size, because i tried to feed a file that had a function with an endless loop:
At 4k context it almost shit the bed if i gave it just the offending function, then told it where to look at. At 16k context, with the whole file, it needed some guidance to what the problem was, and after 10-15 minutes of thinking it found the issue. Problem is, it kept second guessing itself for another 20 minutes on the same unrelated thing before giving the output. For which the fix was wrong, but the semanthic was correct. Good enough. Maybe it will be faster if i don't ask for a fix (which i didn't i just asked to look for a specific issue)
Wish i had 3 times the RAM so i can see what happens with more context.
Then i gave it the task to analyze a C file to make an API document. It took half an hour, but then i had a good starting point, which i had to keep changing because it would confuse commands with IDs and things like that.
This was the Qwen 3.5 9B model.
I then tested Gemma 4, being impressed at the tokens per second it gives on my Pixel 8A. Same tasks: same issues with short context, with long context it gave absolutely useless answers when looking at code, but it took 1/3 the time of qwen.
In producing documentation, instead, it was much faster, and it never hallucinated data. Good. in 15 minutes i had everything done.
Not bad for stuff running on a business laptop, while doing actual work.
Tomorrow i will try Qwen 3.6, let's see how it goes..